MAGIX MGXW151PB Wall Charger PD Quick Charge 3.0 18W 3A User Manual
- June 15, 2024
- MAGIX
Table of Contents
MAGIX MGXW151PB Wall Charger PD Quick Charge 3.0 18W 3A
Product Information
Specifications
- Input: AC 100-240V ~ 0.5A Max 50-60HZ
- Output:
- 5.0V 3.0A 15.0W
- 9.0V 2.0A 18.0W
- 12.0V 1.5A 18.0W
- Dimensions: 75mm x 48.6mm x 44mm
- Weight: 53g
Product Usage Instructions
Safety Warnings
Please read the following safety warnings before using the product:
- Do not expose the charger to water or moisture.
- Do not use the charger if it is damaged or shows signs of overheating.
- Keep the charger away from children and pets.
- Do not disassemble the charger; it contains no user-serviceable parts.
- Only use the charger with compatible devices and follow the device manufacturer’s instructions.
Using your Charger
To use your charger, follow these steps:
- Connect the charger to a power outlet using the included power cord.
- Plug the other end of the power cord into the charger’s input port.
- Connect your device to the charger using a compatible USB cable.
- Ensure that the charger’s output voltage matches your device’s requirements. You can adjust the output voltage by using the switch on the charger.
- Once everything is connected, the charger will start charging your device.
- Monitor the charging progress on your device’s screen or LED indicators.
- When your device is fully charged, unplug it from the charger.
- When not in use, disconnect the charger from the power outlet.
Frequently Asked Questions (FAQ)
-
Q: Can I use this charger with my iPhone?
A: Yes, you can use this charger with your iPhone. Just make sure to use a compatible USB cable. -
Q: Can I charge multiple devices at the same time?
A: No, this charger is designed to charge one device at a time. -
Q: Is this charger compatible with international power outlets?
A: Yes, this charger supports a wide range of input voltages (100-240V), making it suitable for use in different countries. However, you may need an adapter to fit the charger into non-standard power outlets. -
Q: What should I do if the charger gets hot during use?
A: If the charger becomes abnormally hot during use, disconnect it from the power outlet and stop using it. Contact our customer service for further assistance.
Safety Warnings
- Avoid extreme temperatures (>40 °C / 104 °F)
- Use Original and Certified Cables
- Don’t Expose to liquids
- Avoid Dropping
- Don’t Disassemble
Customer Service
- 12 Month Limited Warranty
- Lifetime Technical Support
For FAQs and more information’s please visit our website
Using your Charger
- Plug the charger into the Electric plug
- Charge your devices connecting them with an USB-A Cable to the Magix® Charger
Specifications
| Input | AC 100-240 ~ 0.5A Max 50-60HZ |
|---|---|
| Output |
- 5.0V 3.0A 15.0W,
- 9.0V 2.0A 18.0W,
- 12.0V 1.5A 18.0W
Size| 75mm x 48.6mm x 44mm
Weight | 53g
|
For indoor use only
---|---
| To be thrown through the appropriate disposal centers for electronic
materials
@magixtechnology
@magixtechnology
[email protected]