Jackery JE-100A Explorer 100 Plus Portable Power Station User Manual
- June 15, 2024
- Jackery
Table of Contents
Jackery JE-100A Explorer 100 Plus Portable Power Station User Manual
Congratulations on your new Jackery Explorer 100 Plus. Please read this manual
carefully before using the product, particularly the relevant precautions to
ensure proper use. Keep this manual in an accessible place for frequent
reference.
In compliance with laws and regulations, the right of final interpretation of
this document and all related documents of this product resides with the
Company.
Please kindly notice that no further notifications will be given in case of
any update, revision or termination.
TECHNICAL SPECIFICATIONS
Product Name: Jackery Explorer 100 Plus
Model No.: JE-100A
Cell Chemistry: LiFePO4
Internal Battery: 6.2Ah/16V 99.2Wh equal to 31000mAh 3.2V
Weight: Around 2.13 lbs / 965 g
Dimensions: 4.96 x 3.41 x 3.43 in / 12.6 x 8.65 x 8.7 cm
Cycle Life: 2000 cycles to 80%+ capacity
USB-A Output: 18W Max, 5V⎓3A, 9V⎓2A, 12V⎓1.5A
USB-C1/C2 Output: 100W Max, 4.5V⎓5A, 5V⎓3A, 5V⎓4.5A, 9V⎓3A, 12V⎓3A,
15V⎓3A, 20V⎓5A
PPS: 5-21V⎓5A, 100W Max
USB-C1+USB-C2 Output: 110W Max
USB-C1/C2+USB-A Output: 118W Max
USB-C1+USB-C2+USB-A Output: 128W Max
USB-C1/C2 Input (PD Input): 100W Max, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A,
20V⎓5A
USB-C1/C2 Input (Car Input): 60W Max, 11-17.5V⎓5A
USB-C1/C2 Input (Solar Input): 100W Max, 18-27.2V⎓5A
Charge Temperature: 32℉~104℉(0°C~40°C)
Discharge Temperature: 14℉~104℉(-10°C~40°C)
CERTIFICATIONS
USB Type-C and USB-C are registered trademarks of USB Implementers Forum. ® ®
PACKAGE LIST
-
Jackery Explorer 100 Plus
-
USB-C Charging Cable
-
DC8020 to USB-C Adaptor
-
User Manual
GET TO KNOW YOUR GEAR
Product Appearance
LCD DISPLAY
Battery Power Indicator
When the product is being charged, the orange circle around the battery
percentage will light up in sequence. When charging other devices, the orange
circle will stay on.
Low Battery Indicator
When the battery is less than 20%, the Low Battery Indicator will stay on.
When less than 5%, the Low Battery Indicator will flash. When it is being
charged, the Indicator will be o.
Always-on Display Mode
After the display screen lights up, double-click the DISPLAY Button and the
mode of Always-on display will be on, then press it again to turn o the
screen.
Energy Saving Mode
The Energy Saving Mode is disabled by default. When the Energy Saving Mode is
enabled, this occurs if the product is not connected to any device or the USB
output power is less than or equal to 2W, the product will automatically turn
o all outputs after 12 hours.
To turn on the Energy Saving Mode
Long press the DISPLAY Button until the Energy Saving Mode icon lights up
on the screen. Switching on the Energy Saving Mode enables the product to
continuously charge devices less than or equal to 2W.
To turn off the Energy Saving Mode
Long press the DISPLAY Button until the Energy Saving Mode icon
disappears.
Fault code
In order to respond to the feedback quickly, we set up common fault codes F1,
F2, F3 in the system: If any codes appear, please remove the load or unplug
the charging plug, the product can restore by itself, if not, please contact
after-sales service.
High-temperature warning
If it appears on the screen, do not worry, the battery will restore
automatically after cooling.
Low-temperature Warning
If it is displayed on the screen, do not worry. It will automatically restore
after the ambient temperature is restored.
BASIC OPERATIONS
LCD Screen On/OFF
To turn on, press the DISPLAY Button or when there’s a charging input or
discharging output, the screen display will light up automatically. To turn o,
press the Display Button again and the screen display will turn o. Or, if
there is no operation in 30 seconds, the product will enter a sleep state and
the screen display will automatically turn o.
To turn on/o the Always-on Display (under charging or discharging state),
follow these steps:
After the display screen lights up, double-click the DISPLAY Button and the
mode of Always-On Display will be on, then press it again to turn o the
screen.
Tip: During Always-On Display mode, the screen automatically turns o
after 2 hours without charging or discharging.
CHARGING YOUR JACKERY EXPLORER 100 PLUS
Charging from the wall
The USB-C wall charger is not included in the package.
Solar charging
Jackery SolarSaga 100 Connection Guide
The Jackery Explorer 100 Plus adopts USB-C input as the solar charging input.
You can refer to the following connection scheme to charge your Explorer 100
Plus.
Jackery New SolarSaga 40 Mini or 80 Solar Panel Connection Guide
- For users who have already purchased the 40W solar panel, the following scheme shows how to connect it to the Explorer 100 Plus.
CHARGING IN THE CAR
This product can be charged with a 12V car charger. Please start the vehicle before charging to prevent draining the car battery and prevent your vehicle from being unable to start.
Meanwhile, please ensure that the car charger and the car cigarette lighter
provide a good connection, and ensure that the car charger is fully inserted.
In addition, if the vehicle is running on bumpy roads, it is forbidden to use
the car charger in case it burns due to a poor connection. The Company will
not be responsible for any loss caused by non-standard operation.
SAFETY PRECAUTIONS WHEN CHARGING
- Vehicle charging is only applicable in 12V vehicles, not in 24V ones. Please do not charge this product in 24V vehicle to avoid personal injury and property loss.
- It is recommended to use Jackery accessories – solar panels for solar charging. We will not be responsible for the losses caused by using other brands’ solar panels.
The basic safety precautions should be followed when using this product, including:
a. Please read all instructions before using this product.
b. Close supervision is required when using this product near children to
reduce the risk.
c. Risk of electric shock may occur if using accessories recommended or
sold by non-professional product manufacturers.
d. When the product is not in use, please unplug the power plug from the
product’s socket.
e. Do not dismantle the product, which may lead to unpredictable risks
such as fire, explosion or electric shock.
f. Do not use the product through damaged cords or plugs, or damaged
output cables, which may cause electric shock.
g. Charge the product in a well ventilated area and do not restrict
ventilation in any way.
h. Please put the product in a ventilated and dry place to avoid rain and
water to cause electric shock.
i. Do not expose the product to fire or high temperature (under direct
sunlight or in vehicle under high heat), which may cause accidents such as
fire and explosion.
j. The product should not be exposed to rain, water, etc.
WARRANTY
Note: We only provide our warranty for the buyer who purchased on Amazon (Jackery), Jackery website or local authorized dealers.
Limited Warranty
Jackery warrants to the original consumer purchaser that the Jackery product will be free from defects in workmanship and material under normal consumer use during the applicable warranty period identified in the ‘Warranty Period’ section below, subject to the exclusions set forth below.
This warranty statement sets forth Jackery’s total and exclusive warranty obligation. We will not assume, nor authorize any person to assume for us, any other liability in connection with the sale of our products.
Warranty Period
2 Years Standard Warranty: The standard warranty period for Jackery Explorer 100 Plus is 24 months. In each case, the warranty period is measured starting on the date of purchase by the original consumer purchaser. The sales receipt from the first consumer purchase, or other reasonable documentary proof, is required in order to establish the start date of the warranty period.
Exchange
Jackery will replace (at Jackery’s expense) any Jackery product that fails to operate during the applicable warranty period due to defect in workmanship or material. A replacement product assumes the remaining warranty of the original product.
Limited to Original Consumer Buyer
The warranty on Jackery’s product is limited to the original consumer
purchaser and is not transferable to any subsequent owner.
Exclusions
Jackery’s warranty does not apply to:
Misused, abused, modified, damaged by accident, or used for anything other
than normal consumer use as authorized in Jackery’s current product
literature. Attempted repair by anyone other than an authorized facility. Any
product purchased through an online auction house.
Jackery’s warranty does not apply to the battery cell unless the battery cell
is fully charged by you within seven days after you purchase the product and
at least once every 6 months thereafter.
Manufacturer/Factory:
Shenzhen Hello Tech Energy Co.,Ltd.
Jiaanda Science and technology industrial park,
the east side of Huafan Road, Tongsheng Community,
Dalang Street,
Longhua District, Shenzhen, Guangdong, China
Contact us:
hello.eu@jackery.com
Version : JAK-UM-V1.0
More language versions are supported.
Other language versions of the manual can be downloaded on our official
website:
https://de.jackery.com/pages/user-guides
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>