Hanmi Micronics CaluX Tri Mode Mechanical Keyboard User Manual
- June 15, 2024
- Hanmi Micronics
Table of Contents
Micronics CaluX Tri Mode Mechanical Keyboard
CaluX
Tri-mode Mechanical Keyboard Specification
Product name: Three-mode single white light mechanical keyboard
Model: CaluX
Attached product picture (For reference only)
Product features
1-1. Double color keycaps, stylish and easy to clean
1-2. Professional mechanical backlit bluetooth three-mode office keyboard,
which can be freely switched and used in different devices, completely solving
the trouble of multiple computers and multiple sets of equipment; welding
shafts or plug-in shafts can be selected at will
1-3. RGB light backlight , the product supports 20 different backlight modes
and is easy to switch, which strengthens the deep application of each mode,
and freely adjusts the brightness and frequency
1-4. Full keys conflict free
Mechanical Electrical Characteristics
Basic
specificat
ions| IC solution| YC31 21 -R , tri-mode mechanical keyboard
---|---|---
Working voltage| Li-battery 3.7V, 4200mA/H
Working current| isomp MAX
Battery life| 361-1
Interface| USB+2.4G +Bluetooth Tri-mode
USB+TYPE-C cable| Charging cable OD:3.81800mm, nickel-plated black braided
wire
Key number| 108
Multimedia key| No
Dimension| 430 123.5* 25.5±1mm| W eig ht| 1350±30g
Color| Black
Working way| Matrix scan
Language & process| Double color keycaps, laser engraving
LOGO| Customized| LOGO process| Laser engraving/UV/silkprint
Parametric properties| Key force| 1.5KG
---|---|---
Starting force| 50±10g
Keycap spacing| 19.00mm.+0.05nun
Operating load| 60±5gf
Parametric properties| Operating stroke| 4.0±0.5mm
Conduction stroke| 2.2±0.6mm
Trigger trip| I .8±0.5mm
Maximum force stroke ( I20g)| 3.8±0.2mm
Lifetime| In DC 5V 0.ImA Test more than 50 million times at a rate of 4 times
per second under the working conditions
Touch| Knock anywhere on the button at a rate of 4 times per second. and feel
no bad hand feeling
Environm ental
parameters| Operating temperature| 0 to + 55 °C
Working humidity| 40%-80%
Storage temperature| -20°C to + 60°C
Storage humidity| 593% (40°C)
Main parts and materials
| Upper cover | Black | ABS |
|---|---|---|
| Lower cover | Black | ABS |
| Middle board | Cream | PC |
| Keycaps | Black | Double color |
| Tripod (double layer) | Black | ABS |
| Switch | Cyan |
Connection
4.1
4-2、2.4G receiver connection
4-3、Bluetooth 3.0, 5.0 connectivity
Character abrasion test
Testing frequency: 1000 times
Testing speed: 72 times / min
Eraser type (1107#)
Journey: 12 mm
Ambient temperature: 25℃
Humidity: 65%
Function description
6-1. Indicator light: 6-2.
Lighting Arrangement (primary key area white light)
6-3. FN key combination function
Definition of electrical function of monochromatic light scheme
Press the FN+ combination to switch, 20 kinds of backlight cycle sequence：always bright mode–To guide the country-breathing mode–One press Light goes out– Follow the wave and go with the flow-Flowing light-Flowing coloredlight-DrippingRipples-StipplingEye-catching-Abouttohappen- steppingonthesnow-ButtonRipple -flowers bloom rich-RunningHorse-Rotating storm-VariableRunningHorse–starry spot-Constant stream-Oblique transformation- Light wave(Default always bright)
6-4. Description of the switch at the bottom of the
keyboard
6-4-1、When the
system switch is turned to MAC, it is the Apple system, and when it is turned
to WIN, it is the Microsoft system.
6-4-2. When the mode switch is turned to USB, turn off the lithium battery, and insert the cable for charging and USB mode. When dialing to BT, it is Bluetooth mode, and when dialing to 2.4G, it is 2.4G mode.
6-5. Instructions for charging and low voltage indication
When charging, Red Light often bright, full red light off, when the voltage is less than 3.3 v, red light flashing
6-6. Mode instructions
6-6-1. Wired mode: no indicator light, when the switch is turned to USB, it is wired mode
6-6-2. 2.4G mode: The white indicator of the 1 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-6-3. Bluetooth mode 1: the white indicator of the 2 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-6-4. Bluetooth mode 2: The white indicator of the 3 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-6-5. Bluetooth mode 3: The white indicator of the 4 key flashes, when the connection is successful and the backlight effect is restored; the slow flash is for reconnection, and the fast flash matches the code;
6-7. 2.4G pairing
2.4G pairing
After the keyboard is powered on, press the FN+1 combination key for 3S to enter the pairing mode, the Q key white indicator flashes quickly, insert the receiver, exit the pairing code after successful pairing, the Q key white indicator returns to normal backlight mode, and the paired device cannot be found After 20s, exit the pairing mode and the white indicator of the Q key will enter the waiting pairing mode. When there is no code matching, it will enter sleep mode after 7 seconds.
6-8. Bluetooth pairing
Press and hold the FN+2/3/4 key combination for 3S, the keyboard enters the code matching state, the white light of the corresponding device key flashes quickly, and the Bluetooth device starts to be connected. After connecting the device, the indicator light returns to normal backlight mode. If not connectedd, the backlight will be off after 7 seconds and the keyboard goes to sleep.
6-9. Reconnection instructions
6-9.1 The indicator light flashes slowly during the 2.4G reconnection process. After connecting, the indicator light will return to normal backlight. Press the button during the reconnection process to extend the reconnection time. Within 2 minutes from releasing the button, the reconnection fails and the backlight turns off, the keyboard will go to sleep, if the pairing is successful, it will enter the pairing mode again. After the pairing fails, the keyboard will go to sleep but will keep the last successful pairing data.
6-9-2. The indicator light flashes slowly during the Bluetooth reconnection process. After connecting, the indicator light is normally backlit. Pressing the button during the reconnection process can extend the reconnection time. Within 2 minutes after releasing the button, the reconnection fails, the backlight goes out, and the keyboard turned off. Go to sleep, if the pairing is successful and enter the pairing mode again, after the pairing fails, the keyboard will go to sleep but the last successful pairing data will be retained
System Compatibility
7-1. Interface: Compliant with USB standard V1.1；Support USB1.0/1.1 ;
Compatible with USB 2.0/3.0
7-2. Operating system: WINDOWS XP/7/8/10/MAC V10.X
7-3. This solution can be certified (FCC, CE, ROHS and other safety
certification)
FCC Instructions
FCC Compliance Statement(Part 15.19 (3))
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Information
This device complies with Part 15 of the FCC Results. Operation is subject to
the following two conditions:
- This Device may not cause harmful interface, and
- This Device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for CLASS B digital device, pursuant to Part 15 FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try correct the interference
by one or more of the following measures ;
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to
which receiver is connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
CAUTION : Exposure to Radio Frequency Radiation.( Cases not subject to
SAR measurement) To comply with FCC’s RF exposure limits for general
population / uncontrolled exposure, the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 20cm from all
persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.
FIG. 1：
FIG. 2: Receiver
Rated voltage: 5V
Interface: USB
Receiving distance: 8m
Weight: 2g
Dimension: 18.6×13.5×6±0.01mm
WORLD CLASS TECHNOLOGY
WORLD CLASS QUALITY, WORLD CLASS COST.