GREEMGUARD UL2818G FM SoftZone Junior Tiny Twisting Climber User Guide
- June 15, 2024
- GREEMGUARD
Table of Contents
UL2818G FM SoftZone Junior Tiny Twisting Climber
User Guide
UL2818G FM SoftZone Junior Tiny Twisting Climber
PRODUCT CERTIFIED FOR
LOW CHEMICAL EMISSIONS
UL.COM/GG UL 2818 GOLD
CERTIFICATE OF COMPLIANCE ECR4Kids
Junior Tiny Twisting Climber
262564-420
Certificate Number
10 May 2022 – 12 Jul 2024
Certificate Period
Certified Status
UL 2818 – 2022 Gold Standard for Chemical Emissions for Building Materials,
Finishes and Furnishings
Classroom furniture and furnishings are modeled to the classroom environment
with a room volume of 231 m³ and 0.82 air changes per hour (ACH) accommodating
27 students.
Product tested in accordance with UL 2821 test method to show compliance to
emission limits on UL 2818. Section 7.1 and 7.2.
GREENGUARD Gold Certification Criteria for Furniture and Mattresses
Criteria| CAS Number| Maximum Allowable Predicted
Concentration| Units
---|---|---|---
TVOC (A)| –| 0.22| mg/m³
Formaldehyde| 50-00-0| 9 (7.3 ppb)| µg/m³
Total Aldehydes (B)| –| 0.043| ppm
4-Phenylcyclohexene| 4994-16-5| 6.5| µg/m³
1-Methyl-2-pyrrolidinone (C)| 872-50-4| 160| µg/m³
Individual VOCs (D)| –| 1/2 CREL or 1/100th TLV| –
(A) Defined to be the total response of measured VOCs falling within the C6 –
C16 range, with responses calibrated to a toluene surrogate.
(B) The sum of all measured normal aldehydes from formaldehyde through
nonanal, plus benzaldehyde, individually calibrated to a compound specific
standard. Heptanal through nonanal are measured via TD/GC/MS analysis and the
remaining aldehydes are measured using HPLC/UV analysis.
(C) Based on the CA Prop 65 Maximum Allowable Dose Level for inhalation of
3,200 g/day and an inhalation rate of 20 m³/day.
(D) Allowable levels for chemicals not listed are derived from the lower of
1/2 the California Office of Environmental Health Hazard Assessment (OEHHA)
Chronic Reference Exposure Level (CREL) as required per the
CDPH/EHLB/Standard Method v1.2 and BIFMA level credit 7.6.2 and 1/100th of the
Threshold Limit Value (TLV) industrial work place standard (Reference:
American Conference of Government Industrial Hygienists, 6500 Greenway,
Building D-7, and Cincinnati, OH 45211-4438).
UL investigated representative samples of the identified Product(s) to the
identified Standard(s) or other requirements in accordance with the agreements
and any applicable program service terms in place between UL and the
Certificate Holder (collectively “Agreement”). The Certificate Holder is
authorized to use the UL Mark for the identified Product(s) manufactured at
the production site(s) covered by the UL Test Report, in accordance with the
terms of the Agreement. This Certificate is valid for the identified dates
unless there is non-compliance with the Agreement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>