DEFY DSS 617 Multifunction Vitroceramic Stove Instruction Manual
- June 15, 2024
- DEFY
Table of Contents
DEFY DSS 617 Multifunction Vitroceramic Stove Instruction Manual
Introduction
Dear Customer,
Your new Defy oven was manufactured in a state-of-the-art facility and has
passed the strictest quality control procedures.
Please read this manual carefully before using your oven for the first time
and then store it within easy reach for future reference.
This manual will provide you with information on how to operate and care for
your oven to gain the maximum benefit from it.
We trust you will enjoy years of trouble free use.
EXPLANATION OF SYMBOLS
- Important information
- Warning— Hazardous situations
- Warning— Electric shock
- Caution; Warning for fire hazard
- Caution; Warning for hot surfaces
PLEASE REGISTER YOUR PRODUCT AT
www.defy.co.za
DEFY APPLIANCES (PTY) LTD
P.O.BOX 12004
JACOBS
DURBAN
4026
SOUTH AFRICA
General Information
Unpacking
Please ensure that packaging material is disposed of in a responsible manner.
Plastic bags should be cut up to prevent children playing with them and accidentally suffocating.
Remove all packing from the oven cavity and position the accessories.
If the appliance is damaged in any way, do not use it. Report the damage to your dealer, who will take the necessary corrective action.
Installation
- Levelling feet are provided to assist you in positioning your stove, so that it will stand firm and level. To adjust the level, turn the relevant foot to either raise or lower the stove.
Connecting the sprague to the oven
-
Purchase a standard plastic/metal saddle type bracket, capable of going around the 20 mm diameter sprague and with a hole pitch of 38 mm (Plastic) 45 mm (Metal), and two 4.2mm x 12mm self-tapping screws from your local hardware store.
-
Feed the cables through the sprague and connect to the mains terminal block of the appliance.
-
Place the plastic/metal saddle around the sprague and fasten via the 2 self-tapping screws onto the factory pre-punched holes adjacent to the mains terminal block of the appliance.
Electrical installation
The manufacturer and seller do not accept responsibility for any damage due to
incorrect installation or electrical connection. This appliance should not be
connected through an earth leakage system. Refer to S.A.N.S. 10142
Connection to the power supply
This appliance has a ‘Y’ type supply cord connection and must be installed by a licensed electrician, who will ensure that the stove is correctly connected and safely earthed.
The rated current is printed on the serial number label attached to the stove upper back panel.
The appliance must be connected to the mains through an All pole isolating switch which has a minimum clearance between the contacts of 3 mm in All poles. A means for disconnection must be provided in the fixed wiring.
- WARNING! ELECTRICAL CONNECTION MUST ONLY BE DONE BY A QUALIFIED ELECTRICIAN!
- Do not carry the product using the oven door handle, this may damage your oven door hinges!
- You may lift the product with the door open by holding the inside of the oven and the back of the hob.
Technical Specifications
Voltage / frequency| 220-240V~ 50 Hz| Energy efficiency class*| A
Total power consumption| 8211 W| Inner lamp| 25 W
Total grill power consumption| 1200W| External dimensions (height / width /
depth)| 1210 mm x 600 mm x 655 mm
Amperage| 36A| Main oven| MULTIFUNCTION THEMOFAN
* Basics: Information on the energy label of electrical ovens is given in
accordance with the EN 50304 standard. Those values are determined under
standard load with bottom-top heater or fan assisted heating (if any)
functions.
The energy efficiency class is determined according to function: Conventional
bake mode.
Anti-tilt mechanism
All stoves can tilt if you or a child sit or lean on an open oven door.
Safety regulations stipulate that the ANTI-TILT mechanism supplied with the
stove, must be fitted as shown.
-
“A” 1 x Stability chain
-
“B” 1 x Stability hook with anchor sleeve
-
“A” is factory fitted at the rear of the stove in the centre. (See overleaf for instructions if the removable splashback is to be fitted)
-
Position the stove and move “A” to touch the wall behind the stove.
-
Mark the hole where “A” touches the wall behind the stove
Move the stove away from the wall to allow for an area to work in. -
Using a 8.0 mm concrete bit, drill a hole at the marked position.
-
Using the Stability hook and anchor sleeve “B”, firmly secure “B” to the wall.
-
Slide the stove back in position and engage the stability chain “A” onto the Stability hook “B”.
-
The stove is then secured and will not accidentally tilt if downward pressure is applied to the open oven door.
Anti-tilt installation side view
Stability chain to be as short as possible to prevent oven from tilting in any
direction
Accessories supplied may vary depending on the model. Not all accessories in
the user manual may be included with your appliance. Accessories may be
purchased from Defy spares.
Important Safety Instructions
This section contains safety instructions that will help you avoid risk of
injury and damage. All warranties will become void if you do not follow these
instructions.
General safety
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Connect the appliance to an earthed outlet/line protected by a fuse of suitable capacity.
-
The earth installation should be completed by a qualified electrician. Our company shall not be liable for any problems arising due to the appliance not being earthed in accordance with the local regulations.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified persons in order to avoid a hazard.
-
Do not operate the appliance if it is defective or has any visible damage.
-
Do not carry out any repairs or modifications on the appliance.
-
Never wash down the appliance with water! There is a risk of electric shock!
-
Never use the appliance when your judgment or coordination is impaired by alcohol and/or drugs.
-
The appliance must be disconnected from the mains during installation, maintenance, cleaning and repair procedures.
-
Be careful when using alcoholic drinks in your dishes. Alcohol evaporates at high temperatures and may ignite and cause a fire.
Do not heat closed tins and glass jars in the oven. The pressure that would build up in the tin/jar may cause it to burst. -
Do not place baking trays, dishes or aluminium foil directly onto the bottom of the oven. The heat accumulation might damage the bottom of the oven.
-
Keep all ventilation slots clear of obstructions.
-
The appliance may be hot when it is in use. Never touch the hot burners, inner sections of the oven, heaters etc.
-
Never touch the metal surfaces of the hob and control panel during use.
-
Always use heat resistant oven gloves when putting in or removing dishes from the hot oven.
-
Do not use the appliance with the front door glass removed or cracked.
-
Do not trap the mains cable between the oven door and frame and do not route it over hot surfaces as the cable insulation may melt and cause a fire as a result of a short circuit.
-
Make sure that the function knobs are switched off after every use.
-
Always dry food thoroughly before placing it in hot oil or fat. Frozen food will splatter if added too quickly.
-
Only use the appliance for preparing food.
-
Never heat fat or fry with a lid on the pan.
-
Do not leave hot fat or oil unattended. If overheating occurs, these could catch fire.
-
Do not store flammable items in the oven.
-
Always keep the oven door gasket clean.
Operation Instructions
Control panel
Selector switch
0 | Off | Switches the Oven off |
---|---|---|
Operating with fan (Defrost) | The oven is not heated. Only the fan is in |
operation. Suitable for thawing frozen granular food slowly at room
temperature and cooling down the cooked food.
| Conventional Bake.| Heat is evenly distributed from the top and bottom
element. Recommended for cakes, pastries and casseroles.
| Fan assisted cooking| Warm air heated by the top and bottom heater is
rapidly distributed throughout the oven by means of the fan. Suitable for
cooking meals on different shelf levels. Suitable for cooking with two
shelves.
| Thermofan heating| Warm air heated by the rear heater is rapidly distributed
throughout the oven by the fan. Suitable for cooking multiple meals on
different rack levels.Preheating is not required in most cases.
| Static Bake & Steam Assisted Clean (See maintenance section)| Recommended
for dishes that require further cooking at the center or the base. Heat is
given off from the bottom element. Suitable for pizza and browning of food.
| Turbo grill| Grilling effect is not as strong as in Full Grill· Put
small or medium sized portions in the correct shelf position under the grill
heater.· Set the desired temperature.· Turn the food after half of the
grilling time.
| Full grill| Large grill at the ceiling of the oven is in operation.· Put
large or medium sized portions in the correct shelf position under the grill
heater.· Set the temperature to maximum level.· Turn the food after
half of the grilling time.
| 3D Function & steam assisted cooking| Top heating, bottom heating and The
roman heating are in operation. Food is cooked evenly and quickly all around.
Cook with one shelf only.
Initial use
- Touch on the timer to energize the oven.
Time setting
- Touch until flashes. Press +/- keys to set the time of the day after the oven is energized for the first time. Confirm the setting by touching symbol and wait for 4 seconds without touching any keys to confirm.
Oven operation
Set the function knob to the desired operating mode. See page 5 for functions.
Set the temperature knob to the desired temperature. The thermostat indicator
light will glow and remain on until the oven has reached the selected
temperature.
The indicator light will then switch between off and on as the thermostat
maintains the selected temperature.
Note:
The oven thermostat is marked to 70°C. When set to this position, the oven may
be used as a warmer.
Baking / Roasting
Set the selector knob to the desired mode.
Set the oven thermostat to the desired temperature.
Once the thermostat indicator light turns off, preheating is complete.
Thereafter place the food in the oven on the middle shelf where possible.
Grilling
Both the wire shelf and roast pan may be used for grilling. If you are
grilling on the wire shelf, use the baking tray on the lower rack as a drip
tray.
Position the shelf in the desired position below the grill element. Set the
selector switch and oven thermostat to their respective grill positions.
Preheat the grill element for about 5 minutes.
Place the food in the center of the shelf and monitor the grilling to avoid
burning the food.
Foods that are not suitable for grilling create a fire risk. Only grill food
which is suitable for intensive grilling heat.
**| Foods that are not suitable for grilling create a fire risk. Only grill
food which is suitable for intensive grilling heat.
---|---
| DANGER Risk of scalding by hot steam! Take care when opening the oven
door as steam may escape.
IMPORTANT:** Grilling must be done with the oven door closed!
WARNING : Unattended cooking on a hob with fat or oil can be dangerous
and may result in a fire.
Cooking times table
Dish | Acc. | pos. | P | °C | Time |
---|---|---|---|---|---|
Sponge cake | Cake Tin** | 1&4 | **** | 170°C | 20 Min |
Cup- cakes | Muffin Tin** | 1&4 | **** | 180°C | 22 Min |
Biscuits | Bake Tray* | 1&4 | **** | 180°C | 22 Min |
Chicken breasts | Roast Pan* | 4 | Max | 20 Min | |
Roast chicken | Roast Pan* | **** 1 | **** | 180 ° C | **** 70 Min |
Pizza | Wire Shelf* | 2 | **** | 190 ° C | 7 Min |
Timings in this table are meant as a guide.
Timings may vary due to temperature.
*These accessories may not be included with your product
**These commercially available accessories are not included with your product.
Vitroceramic smooth top
WARNING: In the unlikely event of sustaining accidental damage and
cracking, switch off the appliance at the mains to avoid electric shock and
have the panel replaced before further use.
Plate controls—variable
- Select the heat level by turning the plate control knob to the required setting.
- 1= low , 3 = medium and 6 = high.
- The relevant pilot light will glow and shortly thereafter the hot surface indicator light on the hob will glow. It will remain on for 20 to 30 minutes after switch off. This is a reminder
Use only pots with a solid level base. An uneven base can prolong cooking
times and waste energy.
Danger of fire: Do not store items on the cooking surface.
CAUTION: The cooking process has to be supervised. A short term cooking
process has to be supervised continuously.
Maintenance and Care
General cleaning
- Switch off the electrical power supply before cleaning any part of the appliance. Wipe down glass panels, cabinet, door, control knobs, trims and handles with a hot soapy cloth. Do not use a steam cleaner.
- Use only liquid household cleaners and avoid abrasive powders, scouring pads.
Cleaning the oven cavity
- Open the oven door and allow the oven to cool down.
- For improved access, the oven door may be removed. See page 8 for directions.
- It may be necessary to soak burnt soils with a liquid cleaner to soften them before scrubbing them with a nylon brush or scouring sponge.
- Heavy soils on the bottom of the oven may require overnight soaking under a sponge liberally sprinkled with household ammonia.
The soil can then be removed the following morning by washing normally.
Steam assisted cleaning
- Pour 100 ml of water into the emboss on the oven floor.
- Select the steam assisted cleaning function.
- Turn the oven on to run this cycle for 5 minutes.
- At the end of the cycle, wait 5 minutes before opening the door.
- Open the door and wipe the inner surfaces of the oven with a damp sponge or cloth.
- Use warm water with washing liquid, a soft cloth or sponge to clean persistent dirt and wipe it with a dry cloth.
Important! Any food residue must be removed from the bottom of the cavity
before you start steam assisted cleaning. Remove all oven accessories.
Replacing the oven light
The oven light is switched on by the oven thermostat and switches off when the
thermostat knob is returned to 0.
To replace a faulty light bulb:
- Switch off the power at the wall isolator to avoid the possibility of electric shock.
- Unscrew the light cover.
- Unscrew the faulty bulb and fit a new 25-watt bulb rated for 300’C
- Refit the light cover.
Caring for the Vitroceramic hob
-
Vitroceramic is a tough, durable material, which provides a functional and long lasting cooking surface. To keep it looking good, it needs to be treated with care and cleaned regularly.
-
Wipe spillage off as soon as possible with a damp cloth, preferably while the hob is still warm.
-
Clean the hob with a nylon pad and a suitable smooth top cleaning solution, which is available from all Defy Service Centres.
Remove calcium stains (yellow stains) by applying a small amount of lime remover such as vinegar or lemon juice. -
If necessary stubborn spills may be removed using a blade scraper.
-
Do not use metal scourers or coarse abrasivepowders as these could scratch the Vitroceramic surface.
-
Wipe the hob surround with a damp hot soapycloth and dry.
-
DO NOT USE A STEAM CLEANER.
Recommendations
- A pot with rough edges could cause scratches if it were dragged across the surface of the hob.
- Any spillage of sugar solution such as jam, must be removed immediately. If allowed to cool on the Vitroceramic it could pit and damage the surface.
- Do not cover the Vitroceramic with aluminum foil and do not use poor quality aluminum pots. These will leave unsightly deposits which in time, could adhere to the Vitroceramic .
Removing the oven door
The oven door may be removed to improve oven access during cleaning.
-
Open the front door (1).
-
Push down the clips at the hinge housing (2) on the left and right hand sides of the front door by pressing them down as illustrated in the figure.
-
Open the door to halfway.
-
Remove the door by pulling it upwards to release it from the hinges.
Steps carried out during the removal process should be carried out in reverse
order to install the door. Do not forget to close the clips at the hinge
housing when reinstalling the door.
Cleaning the oven door
To clean the oven door, use warm water with washing liquid, a soft cloth or
sponge and then wipe it with a dry cloth.
The front door inner glass is coated with an easy clean material. Do not use
any harsh abrasive cleaners, hard metal scrapers, scouring pads or bleach to
clean the front door inner glass as they may scratch the surface and destroy
the coating material.
Removing the Oven Door Glass
Inner glass can be removed for cleaning.
A. Press clips on both ends of the top décor.
B. Lift the top décor & remove from door.
C. Lift the glass to a 45 degree position and pull towards yourself.
Clean the glass as per the instructions.
Important Notes
OVER THE YEARS, DEFY’S SERVICE CENTRES HAVE IDENTIFIED THIS LIST OF DO’S AND DON’TS AS BEING IMPORTANT FOR CUSTOMER SATISFACTION AND SAFETY. PLEASE READ IT AND FAMILIARISE YOURSELF WITH ITS CONTENTS.
Do
- Clean your appliance regularly.
- Use flat-bottomed pots and pans when cooking on the hob. This will maximize efficiency and reduce electricity costs.
- Leave about a 40 mm. air gap between baking tins and the oven walls. Adequate air circulation is important for good baking results.
- Get into the habit of wearing oven gloves when handling utensils in a hot oven. This will help to avoid accidental burns.
- Partly slide out the oven shelf before removing hot dishes from the oven. This will prevent accidental contact with the hot oven sides.
Don’t
- Use pots which are smaller than the hotplate diameter. This wastes electricity and allows the pot handles to overheat.
- Place anything on the open oven door. The glass is not a work surface and could get scratched.
- Use the appliance to heat the home. Neither the hob nor the oven was designed for this purpose and damage could occur.
- Allow pot handles to overhang the front of the appliance. Children might be tempted to grab them with harmful consequences.
|
The oven may emit steam during use. This is normal and is not a fault. When
metal parts are heated, they may expand and cause noise. This is not a fault.
---|---
Figures in this manual are schematic and may not match your appliance exactly.
| Never try to extinguish a fire with water! When oil has caught fire,
immediately cover the pot or pan with a lid. Switch off the hob if safe to do
so and phone the fire service.
| WARNING: Under no circumstances should the bake element be covered with
aluminum foil. Nor should a pan or tray be positioned directly above the bake
element. Doing so would reflect the heat from the bake element downwards. Heat
to the oven would be restricted and overheating of the space below the element
would result in damage to the oven enamel.
---|---
| WARNING! Hot surfaces may cause burns! Do not touch the hob panel and
any other hot surfaces of the appliance.
Problem check
Do not attempt any repairs yourself.
Before calling a service technician to assist with a problem, please check:
- The mains distribution board for tripped circuit breakers.
- The appliance is plugged in and the wall switch is on.
Remember that you may be charged for a service call even during the warranty period if the fault is due to or caused by any of the above.
Support
If you still have a problem after following all the instructions, contact the customer care line on 086 100 3339. They will be able to advise you on any aspect of the appliance.
Defy customer care call centre
If you have followed the instructions and still have a problem or have any service or spares queries, please contact the customer care line by sending an email to service@defy.co.za or by calling 0861 00 3339. They will be able to advise you on any aspect of the appliance.
Defy Sub-Saharan Africa Branch contact details
ZAMBIA: SOUTHGATE INVESTMENTS LTD
Plot 1606, Sheki Sheki Road
P.O. Box 33681
Lusaka, 10101, Zambia
Tel: +260 0211 242332/3
Fax: +260 0211 242933
defyservicecenter@outlook.com
NAMIBIA: ATLANTIC DISTRIBUTORS (PTY) LTD
10 Tienie Louw Street, Northern Industrial Area
P.O. Box 21158, Windhoek, Namibia
Tel: (061) 216162
Fax: (061) 216134
atlantic@mweb.com.na
ZIMBABWE: TRADE COM AFRICA
Trade Com Africa, 183 Loreley Crescent
Msasa, Harare, Zimbabwe
Tel: +00263 773 438001
servicecentre@tradecomafrica.com
BOTSWANA: RAY MORGAN AGENCIES
RMA Service Centre, Plot 48, East Gate
Gaborone International Commerce Park
Kgale View, Gaborone Botswana
Tel: +267 390 3996 / 390 3912
Fax: +267 318 7376
Cell: +267 7134 6539
service@rma.co.bw
SWAZILAND: LYNDS DISTRIBUTORS
P.O Box 716, Mbabane, Swaziland, H100
Tel: (00268) 2515 4310/8
Fax: (00268) 2518 4318
workshop@hoageys.co.sz
MOZAMBIQUE: COOL WORLD. LDA
Rua da Resistencia No. 97B R/C
Cell: +258 84 44 61 234
mdwholesale@mweb.co.za
Nosso Show Room
Av: da Industrias, Parcela No.735 * 735A Machava, Maputo
Warranty
This certificate is issued by DEFY APPLIANCES (PTY) LTD manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance.
The Company warrants to the original purchaser that for a period of THREE YEARS from date of purchase the appliance is free from defect under normal domestic use, both in workmanship and material, subject to the following conditions.
-
Repair or replacement of any part of this appliance, found by the Company to be defective, shall be at the election of the Company. The Company reserves the right to effect such service through any of its Service Divisions or Authorised Service Dealers. The cost of such service shall be borne by the Company in full, provided that the appliance is located no further than 50 km from a Company Service Centre or an Authorised Service Dealer. Where the appliance is located beyond the 50 km radius, the purchaser shall be liable for the standard travelling charges, as determined by the Company.
CARRY IN SERVICE Microwave ovens, Compact cookers and small appliances are repaired in our service centres and are not collected from the customers home. Faulty units must be delivered to the purchasing dealer or to the nearest Company Service Centre for warranty repairs. -
Cracked, rusted or corroded solid plates, vitreous enamelware, rust, cosmetic wear or cosmetic/ external damage to products/components/fuses and lamps are specifically excluded from these warranties. It is an express condition of these warranties that the purchaser takes due care and attention in the use and maintenance of the appliance. Abuse, misuse in conflict with operating instructions, connection to incorrect voltages and subjection to commercial use shall release the Company from its obligations.
-
This warranty shall become void and cease to operate if the appliance is dismantled by, or any repairs to the appliance are effected by any persons not duly authorised by the Company, or if substitute parts not approved by the Company are used in the appliance, or if the serial number of the appliance is removed.
-
The Company shall not be responsible for damages resulting from fire, flood, civil disturbances or any Act of God. The Company shall not, in terms of these warranties be responsible nor held liable for any consequential loss or damage of any kind caused by or due to the failure or malfunction of the appliance. The Company shall not be responsible for damages caused by insect and/or animal infestation.
-
The Company shall not be responsible for transportation or other costs other than those incurred within the provisions of Point 1 of this Certificate.
-
For warranties in the Republic of South Africa and Sub-Saharan Africa, please contact the customer care line. Please refer to the previous page for South African and Sub-Saharan African contact details.
-
Where service is requested under warranty and no fault or defect can be found by the Company, all costs incurred will be for the purchaser’s account.
-
This Certificate as well as your invoice will serve as proof of purchase. For the purpose of warranty, it will be essential to produce this Certificate and invoice. Failure to do so, will render the purchaser liable for service costs.
KEEP THIS CERTIFICATE AND SALES INVOICE AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
Documents / Resources
| DEFY
DSS 617 Multifunction Vitroceramic
Stove
[pdf] Instruction Manual
DSS 617 Multifunction Vitroceramic Stove, DSS 617, Multifunction Vitroceramic
Stove, Vitroceramic Stove, Stove
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>