NIOX VERO Cleaning and Filtration Efficiency Instructions
- June 15, 2024
- NIOX
Table of Contents
NIOX VERO Cleaning and Filtration Efficiency
Product Information
Specifications
- Recommended Active Ingredients: Sodium Hypochlorite, Quaternary Ammonium Compounds, Biguanides, Isothiazolinones, Pentapotassium bis(peroxymonosulphate) bis(sulphate) Malic acid, Sulphamidic acid, Sodium dodecylbenzenesulfonate, Dipotassium peroxodisulphate, Glucoprotamine, Diethylene glycol mono-butyl ether, Hydrogen peroxide, Glycolic acid
Product Usage Instructions
Cleaning
To clean the product, follow these steps:
- Ensure the product is turned off and unplugged from any power source.
- Use a soft cloth or sponge dampened with water to wipe the exterior surfaces of the product.
- If necessary, use a mild detergent or soap to remove stubborn stains or dirt. Do not use abrasive cleaners or solvents as they may damage the product.
- Rinse the cloth or sponge thoroughly and wipe away any soap residue.
- Dry the product with a clean, dry cloth before plugging it back in or using it.
Filtration Efficiency
The product’s filtration efficiency is of utmost importance for its optimal performance. Follow these guidelines to maintain the filtration efficiency:
- Regularly check and clean the filters according to the product’s user manual.
- Replace the filters as recommended by the manufacturer.
- Ensure proper installation of the filters to avoid any leaks or gaps.
- If the filtration efficiency decreases significantly, contact customer support for assistance.
FAQ
Q: How often should I clean the product?
A: The frequency of cleaning depends on the usage and environmental conditions. It is recommended to clean the product at least once a month or as needed.
Q: Can I use other cleaning agents not mentioned in the user manual?
A: It is strongly advised to only use the recommended active ingredients mentioned in the user manual. Using other cleaning agents may affect the product’s performance and could potentially damage it.
Q: How do I know when to replace the filters?
A: The manufacturer provides guidelines on when to replace the filters. Refer to the user manual or contact customer support for specific instructions related to your product model.
Guidance on cleaning the NIOX VERO®
- IMPORTANT: Please do not use alcohol-based solutions to clean NIOX® technology as it will damage the internal components of the device.
- Clean the instrument and breathing handle with a cloth dampened with water or a mild detergent.
- The following categories of alcohol-free cleaning compounds are also recommended:
Recommended Active Ingredients| Concentrations| Example s
---|---|---
Sodium Hypochlorite| <1.5%|
Quaternary Ammonium Compounds| <5%| · Benzalkonium Chloride
Biguanides
|
<1%
| · Polyhexamethylene biguanide
· Chlorhexidine Digluconate
· Poly (hexamethylene biguanide) hydrochloride
Isothiazolinones| 0.01%| · 2-methyl-2H-isothiazol-3-one
· 5-chloro-2-methyl-2H-isothiazol-3-one
Pentapotassium bis(peroxymonosulphate)
bis(sulphate)
| 40-55%|
Malic acid| 20-25%|
Sulphamidic acid| 4-6%|
Sodium dodecylbenzenesulfonate| 3-5%|
Dipotassium peroxodisulphate| <1.56%|
Glucoprotamine| 25-30%|
Diethylene glycol mono-butyl ether| 10-20%|
Hydrogen peroxide| <2.5%|
Glycolic acid| <2.5%|
- Cleaning products and cleaning wipes containing those ingredients within the recommended concentrations are suitable for use with NIOX VERO®.
- We also have tested and can recommend the following cleaning wipes for use with the NIOX VERO® device:
- Azo Universal Wipes (by Vernacare)
- Chemgene HLD4I Wipes (by MediMark Scientific)
- Clinell Universal Wipes (by Gama Healthcare)
- Incidin Oxywipe S (by Ecolab)
- Incidin Plus Liquid (by Ecolab)
- Medipal (by Pal International)
- Mikrozid Sensitive Wipes (by Schülke)
- UV light sterilisers may also be used with NIOX VERO®
- DO NOT clean the instrument or handle with products containing any type of alcohol, including any cleaning agents used to clean the facility, or other equipment in the area, as well as alcohol wipes or sprays used on patients. Do not use products such as, but not limited to:
- Disinfectants, sprays, or wipes containing alcohol.
- Any cleaning agents used to clean your facility or other equipment in the area, as well as alcohol wipes or sprays used on patients.
- Hand sanitizer containing alcohol.
- Use of substances containing alcohol in the proximity of the NIOX VERO® instrument may cause erroneous FeNO measurements.
- Minimise the use of any solvents near the device.
- Regarding COVID-19 specifically, sodium hypochlorite 0.5-0.65% is recommended against SARS-CoV-2 (COVID-19 virus) and can be used to clean the NIOX VERO® device itself. Benzalkonium chloride 0.05-0.2% is also an effective cleaning agent against coronaviruses and is compatible with NIOX VERO®.
Information on the filtration efficiencies of NIOX VERO® mouth and nasal filters
- NIOX VERO® mouth and nasal filters meet international standards of filtration performance for “Breathing System Filters for Anaesthetic and Respiratory Use” (ISO 23328-1, EN 13328-1), which many other respiratory devices in hospital settings also adhere to. The filters have been tested for bacterial filtration efficiency (BFE) and viral filtration efficiency (VFE) to the highest ASTM standard F2101.
- The BFE of the mouthpiece filter is ≥99.99% and the VFE is ≥99.97%.
- The BFE of the nasal filter is ≥99.93% and the VFE is ≥99.24%.
Contact
For any additional information, please contact the Circassia Technical Operations team:
- Email: nioxtechsupport@circassia.com
- Phone: +4618328837
- Website: https://www.niox.com/contact
NIOX® and NIOX VERO® are registered trademarks of NIOX Group plc. All other product names and brands are property of their respective owners. © NIOX Group Plc. All rights reserved. 004056 December 2022 Rev7
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>