Baseus PB4051Z-P0A0-OS Laptop Power Bank User Manual
- June 15, 2024
- Baseus
Table of Contents
Baseus PB4051Z-P0A0-OS Laptop Power Bank
PRECAUTION
Warnings
Improper use of the product may lead to battery malfunction or severe overheating, and may even cause fire or explosion. To avoid any damage to you and your property, please follow the instructions below when you use and store the product.
- This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur.
- Please charge this product with a charger approved by the local safety standards in case of danger or damage.
- DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product.
- If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product.
- Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation.
- This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F(60°C).
- DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature.
- This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur.
Attention
- Please fully charge this device before using it for the first time.
- The power banks have conversion efficiency, so the battery capacity of the power bank is not equal to the rechargeable capacity.
- Please choose an appropriate charger for recharging this product and suitable cables when charging other devices.
- Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care.
- Please remove the cable when recharging this product or finished charging for any other device to preserve the product integrity.
- If the indication does not light up after pressing the power button, please recharge this product.
- Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long-term storage.
- Please do not dismantle the product by yourself. Improper use or placement may compromise the service life or damage the product, to which our company will not bear any legal responsibilities nor offer any guarantee. Please understand.
Specifications
- Name: Power Bank
- Model No.: PPBLD100HD
- Battery: Polymer lithium battery
- Capacity: 20000mAh / 74Wh
- Energy conversion rate: ≥ 75%
- Type-C1/Type-C2 input: 5V-3A; 9V-3A; 12V-3A; 15V-3A; 20V-3A
- Type-C1/Type-C2 output: 5V–3A; 9V-3A; 12V- 3A; 15V-3A; 20V–5A
- USB1/USB2 output: 4.5V-SA(SCP); 5V-4.5A(SCP); 5V-3A; 9V-3A; 12V-2.5A
- Type-C1+Type-C2 output: 65W+30W
- Type-C1+USB2 or Type-C2+USB1 output: 65W+30W
- Type-C1+ (Type-C2+USB2) or Type-C2+ (Type-C+USB1) output: 65W+15W
- Type-C1+USB1 or Type-C2+USB2 output: 5V-3A
- USB1+USB2 output: 30W+30W
- Type-C1+Type-C2+USB1+USB2 output: 5V-6A
- 5V Total output: 5V-6A
- Product size: 134 X 134 X 19.8mm
- Product weight: About 445g
Content
- Power bank X1
- User manual X 1
- Warranty card X 1
- Charging cable X1
- Storage bag X1
Product Schematic Design
Description
- This product is a high-power digital fast-charging power bank with 100W output and 60W input.
- It has dual inputs and four outputs and is compatible with PD3.0, QC4 +, QC3.0, SCP, FCP, Samsung AFC and other fast-charging protocols.
- It features a digital display showing battery level, voltage, current and remaining charging time.
- It also has multiple built-in safety protection circuits such as over-current, over-voltage, over-temperature and short circuit protection, fast charging most laptops and mobile phones.
Instructions
Button operation instructions
- In a no-load state, press the button once to display the current remaining power.
- When the product outputs for multiple devices at the same time, the display shows in turn output power, current and remaining charging time of the current port.
- When the product inputs and outputs at the same time, only input voltage, current and remaining time are displayed.
Note:
- When charging the power bank, the charge time is displayed on the screen.
- When charging a device, the remaining time of the power bank is displayed.
- Due to the change in charging power, the charging time will change accordingly
Operating Environment
- Operating temperature: non-tropical area, 0°C to 35 °C
- Storage temperatures: 0 °C to 40 °C
Icon Description
- The 5-year icon refers to the “valid period for environment-friendly use”, not the product quality assurance period.
- All electronic products contain toxic and harmful substances such as lead, mercury and cadmium.
- The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, causing environmental pollution or serious damage to people and property.
- The term “environment-friendly use period” means that all electronic products shall be used within this validity period.
- We won’t be held liable for safety issues caused by using the product beyond its safe service life.
Electronic Information Products
Statement on Toxic and Hazardous Substances in Electronic Information Products
This form is compiled by SJ/T 11364.
- 0: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard.
- X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component.
Warning: Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other injuries.
- Manufacturer: Shenzhen Baseus Technology Co., Ltd.
- Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
- Gangtou Community, Bantian Street, Longgang District, Shenzhen
- Executive Standard: GB/T35590
- Hotline: +86-4000-712-711
- Website: www.baseus.com.
- Official After-sales E-mail Address: care@baseus.com.
- PB4051Z-P0A0 1000057738
Declaration of Conformity
- It is hereby declared that PPBLD100HD, a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/35/EU.
- Directive 2014/30/EU, Directive 2011/65/EU.
- The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com.
- This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash.
- It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interterence that may cause undesired operation.
FCC
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used following the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
Suppose this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on. In
that case, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>