BestYiJo GDY23062112 Sound Atmosphere Lamp Instruction Manual

BestYiJo GDY23062112 Sound Atmosphere Lamp

FEATURE

24-key infrared Music LED controller adopts the advanced micro control unit. It is used for controlling a variety of LED lamps. For instance, point-source lights, flexible strip lights, wall washer lights, glass curtain wall lights and so on; have many advantages such as low cost, convenient connection and ease of use Meanwhile you can adjust brightness, static colours and colour- changing effects via infrared remote control. When it is in sound-control mode, the colours will change with the music rhythm.

TECHNICAL PARAMETERS

• Working temperature:- 20 ° C-60° C
• Input voltage: de 12v Output: 3 circuit
• Connecting mode: Common anode
• External dimension: L63°W35*H22mm
• Packing size: L88W65H40mm
• Maximum current: 4A
• Output current: 2A
• Net weight: 50g
• Gross weight: 66g
• Static power loss: <1 W
• Output power: <72W

REMOTE CONTROL FUNCTIONS

USE AND PRECAUTIONS

1. Connect the load lines and power lines, and make sure all the connections are correct before the power is switched on.
2. Ensure there is no obstacle between the IR controller and the receiver when operating
3. This product should not be used in outdoor and any other humid environment. Not allowed to touch water or any liquid. No impacting and knocking. Should not be used in high temperature and high-pressure environments to avoid product damage and cause short-circuits, fire disasters electric shocks etc.
4. The manufacturers will not be responsible for product damage, property damage, personal injury, or any other losses that are caused by improper use.

INSTALLATION

First, the power to test the effect of the fixed position of the lamp, and then the lamp plate back 3M glue the right place.
Note: (before 3M glue, use a dry cloth to wipe clean to stick the light position, 3M glue can be used hot air duct to blow, so better to try to cap viscous) Throttle direction, so that can prevent the light from the sign.

Step 1: Open the cover at the edge of the centre console to conceal the co-pilot line from here.

Step 2: Across the light bar in front and at the back of the co-pilot to the front cover to hide the lines perfectly.

Step 3: Tie the controller directly by using the cable tie and put it into the front cover, only make the signal line visible.

Step 4: Tear the double-sided adhesive and locate the fixed position of the light bar, then stick the light bar on. (Roast the double-sided adhesive and it will become more viscous).

Step 5: Put the visible lines into the gap. It is easy to conceal all the lines.

Step 6: Put the visible into the gap Js is easy to conceal all the lines.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>