genexis FTU 1000-Series and Bracket User Guide

Table of Contents

genexis-FTU-1000-Series-and-Bracket-product-image

Specifications

Product Name: Drilling Template
Compatible Models: FiberTwist FTU-1000, FiberTwist FTU-2000, FiberTwist Bracket-2
Clearance Options: 1 or 20 mm
Bracket Size: 2 3/8 or 60 mm
Additional Clearances: 2 or 50 mm, 3/16 or 5 mm, 2 1/4 or 30 mm
Printing Instructions: Print on A4 paper without scaling.
Installation Instructions: Please leave enough free space around the housing for proper installation of the equipment, cabling, and ventilation.
Note: This is a generalized template, product details may differ compared to your specific product.
Scale: 1:1

Step 1: Printing the Template
To begin, print the drilling template on an A4 paper without scaling. Make sure the printout is in its original size and not resized.
Step 2: Preparing for Installation
Before starting the installation process, ensure you have the necessary tools and equipment.
Step 3: Drilling Guide
Use the drilling guide provided in the template to mark the locations for drilling holes. The template is designed to assist in precise hole placement.
Step 4: Drilling Holes
Using the marked locations as a guide, carefully drill the holes following the specified measurements for clearance. Use appropriate drilling tools based on the material you are drilling into.
Step 5: Inserting Plugs and Screws
After drilling the holes, insert plugs into the holes to provide stability and support. Then, place screws into the plugs to secure the equipment in place.
Step 6: Proper Installation Space
Ensure there is enough free space around the housing for proper installation of the equipment, cabling, and ventilation. This ensures optimal performance and prevents overheating.

Frequently Asked Questions (FAQ)

Q: Can I scale the template to fit a different paper size?
A: It is recommended to print the template on A4 paper without scaling. Scaling may affect the accuracy of hole placement.
Q: Are there different clearance options available?
A: Yes, the template provides options for 1 or 20 mm clearance. Choose the appropriate clearance based on your specific requirements.
Q: What is the bracket size mentioned in the specifications?
A: The bracket size is 2 3/8 or 60 mm. This information is crucial for proper installation and compatibility with the equipment.
Q: Can I use this template for other models?
A: The template mentioned in the manual is compatible with FiberTwist FTU-1000, FiberTwist FTU-2000, and FiberTwist Bracket-2. Other models may have different specifications, so it is recommended to check the specific product manual for accurate templates.
Q: What does “Scale 1:1” mean?
A: “Scale 1:1” indicates that the template should be printed in its original size without any scaling adjustments. This ensures accurate hole placement and proper installation.

FiberTwist FTU-1000, FiberTwist FTU-2000, FiberTwist Bracket-2 $genexis- FTU-1000-Series-and-Bracket-01 $1$$

Print on A4 paper without scaling.
Use the drilling guide to drill the holes, insert plugs and put screws into place.
Please leave enough free space around the housing for proper installation of the equipment, cabling and ventilation.

This is a generalised template, product details may differ compared to your specifc product
Scale 1:1