MaxLite ML2LAxCS2x LED Slim Flush Mount Fixture Instruction Manual

: June 15, 2024
: MaxLite

Table of Contents

MaxLite ML2LAxCS2x LED Slim Flush Mount Fixture
Product Information
Operating Instructions
Tools Required
General Wiring Diagram
- Junction Box Mounting: Ceiling or Wall
FCC
Warranty Information
Limitation of Liability
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MaxLite ML2LAxCS2x LED Slim Flush Mount Fixture

Product Information

Specifications

Models: ML2LAxCS2x
Input Rating: 120VAC, 60Hz

Package Contents

1 – Flush Mount Fixture (1)
1 – Installation Manual
1 – J-Box installation bracket with screws (2)
1 – 4 can retrofit accessories: E26 base, Friction clips, Quick F/M connector, Screws (3)
1 – 5/6 can retrofit accessories: E26 base, Torsion springs, Quick F/M connector, Screws (4)

Tools Required (Not Included)

Gloves
Safety goggles
Ladder
Wire Cutter
Wire Stripper
Phillips Screwdriver
Flathead Screwdriver

General Wiring Diagram

CAUTION: Turn off electrical power at the fuse or circuit breaker box before wiring the fixture to the power supply.
CAUTION: Turn off the power at the fixture before applying any changes to the sensor switch.

Sensor Function Tunable Switch

Left(OFF): Turn off sensor function (Set Sensor to Off position if using an on/off wall control switch.)
Medium(Bi-level): Normal < 25% rated wattage output, It’s 100% wattage output when the PIR sensor detected
Right(ON/OFF): Normal 0% output, It’s 100% output when the PIR sensor is detected.

Junction Box Mounting: Ceiling or Wall

All model sizes: The Slim Flush Mount fixture is LED driver/ballast integrated, So It’s suitable for 4 Octagon/Square/Round J-box, Using in Shallow Plenum, Concrete, Fire-rated, Insulation-batting or spray foam, Framing application.
Note: Junction box mounting applications are generalized for illustrative concepts only. These are not for construction or specification.
Refer to appropriate professional and code authority for specific box and installation requirements.
Pick up the fixture and select the desired sensor function and CCT output (see diagram on page 2) (Note: For 5 models, the sensor and the dimming functions can’t work together.
One functionality only can be used and the other is turned off.)

FAQ

Q: Can the sensor and dimming functions work together?

A: For 5 models, the sensor and the dimming functions can’t work together. Only one functionality can be used at a time, and the other must be turned off.

Q: What tools are required for installation?

A: The tools required for installation (not included) are gloves, safety goggles, a ladder, a wire cutter, a wire stripper, a Phillips screwdriver, and a flathead screwdriver.

Operating Instructions

General Safety Information

To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
Before installing, servicing, or performing routine maintenance on this equipment, follow these general precautions.
Commercial installation, service, and maintenance of luminaires should be performed by a qualified licensed electrician.
For Residential installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
DO NOT INSTALL DAMAGED PRODUCT!
This fixture is intended to be connected to a properly installed and grounded UL-listed junction box.

WARNING:

Risk of Fire – Supply conductors (power wires) connecting the fixture must be rated a minimum of 90℃.
If uncertain consult an electrician.
Risk of Fire/Electric Shock – If not qualified, do not attempt installation. Contact a qualified electrician.

CAUTION:

For your safety read and understand instructions completely before starting installation.
To prevent wiring damage or abrasion, do not expose wiring to the edges of sheet metal or other sharp objects.
Before attempting installation, check your local electrical code, as it sets the wiring standards for your locality.

NOTES:

If the luminaire (fixture) is to be switched from a wall switch, make sure the black power supply wire is connected to the switch. DO NOT connect the white supply wire to the switch.
Make certain no bare wires are exposed outside the wire nut connectors.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Warranty does not apply to lamps not installed in compliance with:
National Electrical Code (NEC)
The Standard for Safety of Underwriters Laboratories Inc. (UL)
Models: ML2LAxCS2x
Input Rating: 120VAC, 60Hz Package Contents:
1 – Flush Mount Fixture (1)
1 – Installation Manual
1 – J-Box installation bracket with screws (2)
1 – 4“ can retrofit accessories: E26 base, Friction clips, Quick F/M connector, Screws (3) 1 – 5/6“ can retrofit accessories: E26 base, Torsion springs, Quick F/M connector, Screws (4)

Tools Required

(Not Included)

General Wiring Diagram

CAUTION: Turn off electrical power at the fuse or circuit breaker box before wiring the fixture to the power supply.
CAUTION: Turn off the power at the fixture before applying any changes to the sensor switch.
Sensor Function Tunable Switch Left(OFF): Turn off sensor function
(Set the Sensor to the Off position if using an on/off wall control switch.)
Medium(Bi-level): Normal < 25% rated wattage output, It’s 100% wattage output when the PIR sensor detected
Right(ON/OFF): Normal 0% output, It’s 100% output when the PIR sensor is detected.

Junction Box Mounting: Ceiling or Wall

All model sizes

The Slim Flush Mount fixture is LED driver/ballast integrated, So It’s suitable for 4” Octagon/Square/Round J-box, Used in Shallow Plenum, Concrete, Fire-rated, Insulation – -batting or spray foam, Framing application.

Note: Junction box mounting applications are generalized for illustrative concepts only. These are not for construction or specification. Refer to appropriate professional and code authority for specific box and installation requirements.

Pick up the fixture and select the desired sensor function and CCT output (see diagram on page 2)
- (Note: For 5″ models, the sensor and the dimming functions can’t work together. One functionality only can be used and the other turned off.)
Fix the installation bracket with screws and connect the ground wire if it exists. (Fig. A)
Fix the safety rope from the installation bracket to the fixture. (Fig. B)
Connect black wire to live wire, white wire to neutral wire, and secure using a quick connector (Fig. C)
Push up the fixture and fix the fixture (Fig D)

Note: Pull down harder to remove the fixture or use the flathead screwdriver to pry on the light from the side and close the ceiling.

Recessed Housing Mounting (E26 Base Retrofit Kits)

Retrofit 4” recessed can housing installation (5” models)

Pick up the fixture and select the desired sensor function and CCT output (see diagram on page 2)
Fix Friction clips bracket to the installation bracket (Fig. E)
Fix the bracket to the fixture, and connect white wire and black wire to the connector male terminal (Fig. F)
Twist screw base adapter to fixture socket (Fig. G) (LED housings skip Step 4)
Connect the quick connector and attach friction clips to install the fixture into the recessed can (Fig. H & I)

Retrofit 5/6” recessed can housing installation (7” and 12” models)

Pick up the fixture and select the desired sensor function and CCT output (see diagram on page 2)
Fix Friction clips bracket to the installation bracket (Fig. J)
Fix the bracket to the fixture, and connect white wire and black wire to the connector male terminal (Fig. K)
Twist screw base adapter to fixture socket (Fig. L) (LED housings skip Step 4)
Connect the quick connector, and attach torsion springs to install the fixture into the recessed can (Fig M & N)

MaxLite LED Slim ® Flush Mount Fixture

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

Warranty Information

MaxLite Inc. warrants its products for a minimum period of FIVE (5) years from the date of original purchase from MaxLite or its authorized distributor/dealer (the “Warranty Period”), as follows:
If a Product fails to operate during the Warranty Period as a result of defects in materials or workmanship, MaxLite will, at its option, repair it, and replace it with the same or like Product.
Please refer to Maxlite’s website (at http://maxlite.com/resources/warranties) for the complete terms and conditions of our warranty.

Limitation of Liability

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS THE SOLE REMEDY FOR ANY AND ALL CLAIMS, WHETHER IN CONTRACT, IN TORT OR OTHERWISE ARISING FROM THE FAILURE OF PRODUCT AND IS INSTEAD OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED TO THE EXTENT PERMITTED BY LAW AND, IN ANY EVENT, SHALL BE LIMITED TO THE WARRANTY PERIOD SPECIFIED ABOVE. THE LIABILITY OF MAXLITE SHALL BE LIMITED TO THE TERMS OF THE EXPRESS WARRANTY SET FORTH HEREIN. IN NO EVENT WILL MAXLITE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM LOSS OF USE, PROFITS, BUSINESS OR GOODWILL, LABOR COSTS, REMOVAL OR INSTALLATION COSTS, DECREASE IN THE LIGHT OUTPUT OF THE LAMP, AND/OR DETERIORATION IN THE LAMP’S PERFORMANCE, WHETHER OR NOT MAXLITE HAS BEEN ADVISED OF THE POSSIBILITY THEREOF.
UNDER NO CIRCUMSTANCES SHALL MAXLITE’S ENTIRE LIABILITY FOR A DEFECTIVE PRODUCT EXCEED THE PURCHASE PRICE OF THAT PRODUCT.
WARRANTY SERVICES PROVIDED UNDER THESE TERMS AND CONDITIONS DO NOT ENSURE THE UNINTERRUPTED OPERATION OF PRODUCTS; MAXLITE SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY ANY DELAYS INVOLVING WARRANTY SERVICE.

This Limited Warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
Because some states or jurisdictions do not allow the exclusion or limitation of liability for consequential or incidental damages, this limitation may not apply to you.
© Copyright 2022. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel:973-244-7300 Fax: 973-244-7333 Email: info@maxlite.com