ADLER EUROPE AD 7412 Electric Heating Pad User Manual
- May 15, 2024
- ADLER EUROPE
Table of Contents
ADLER EUROPE AD 7412 Electric Heating Pad
Instruction For Use
PLEASE READ CAREFULLY. IMPORTANT INSTRUCTIONS, KEEP FOR LATER USE.
-
Read the operating manual before using the device and follow the instructions contained in it. The manufacturer is not liable for damage caused by using the device against its intended use or improper handling.
-
The device is for domestic use only. Do not use for other purposes that are not in accordance with its intended use.
-
Connect the device only to a 220-240V ~ 50/Hz. In order to increase the safety of use, do not switch on many electrical devices simultaneously to one circuit.
-
Be extra cautious when using the device when children are nearby. Do not allow children to play with the device, do not let children or persons not familiar with the device use it. The equipment should not be used by young children, unless the controllers have been pre-set by parents or guardians, or children have been thoroughly instructed how to safely handle the regulators.
Children under three years of age cannot use this device due to the lack of response to overheating. -
WARNING : This equipment may be used by children over 8 years of age and persons with limited physical, sensory or mental abilities, or persons who have no experience or knowledge of the equipment, if this is done under the supervision of a person responsible for their safety or given to them. tips on the safe use of the device and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and maintenance of the device should not be performed by children unless they are over 8 years of age and are supervised. This device cannot be used by people who are not heat sensitive, and people who are very sensitive to heat, who are unable to respond to overheating and by people who require constant care.
-
Always after use, remove the plug from the socket by holding the socket with your hand. DO NOT pull on the power cord.
-
Do not immerse the cable, plug and the entire device in water or other liquid. Do not expose the device to atmospheric conditions (rain, sun, etc.) or do not use in conditions of high humidity (bathrooms, damp camping houses).
-
Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialist repair facility in order to avoid a hazard.
-
Do not use the device with a damaged power cord or the device is not working properly.
Do not repair the device yourself, as it may cause shock. Please return the defective device to the appropriate service center for inspection or repair. All repairs may only be carried out by authorized service points. Incorrectly performed repair can cause serious danger to the user. -
Do not use the device near flammable materials.
-
Do not leave the device or the adapter connected to the outlet unattended.
-
To provide additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30 mA in the electrical circuit. In this regard, please contact an electrician.
-
Do not allow the device or adapter to get wet. If the device falls into the water, immediately pull the plug or adapter from the power socket. Do not put your hands into water when the device is connected to the mains. Before re-use, it must be checked by a qualified electrician.
-
Do not handle the device or adapter with wet hands.
-
The device should be turned off every time you put it down.
-
Do not use the device near water, for example: in the shower, in the bathtub or above the basin with water.
-
If the device uses a power supply, do not cover it, as it could lead to a dangerous increase in temperature and damage to the device. Always, first insert the plug into the power socket in the device and then the power supply to the mains socket.
-
Do not use the bed sheet in folded condition. Do not put pins, needles and other metal objects in the sheet.
-
Do not use the sheet if it is wet or damp. Leave the sheet hung loosely in a ventilated area until it is completely dry.
-
Do not put the power cord on a warmed sheet. Do not fold the product, it should be placed on top when stored, and not cover the product with other heavy objects. Check the product periodically for signs of wear or damage. If such signs or product are used improperly, please contact your supplier before continuing to use it.
-
Store in a dry place. Never put heavy objects on the sheet.
-
Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.
-
Never cover the controller.
-
Before switching on the electric sheet, make sure that it is evenly distributed, there are no kinks or folds.
-
The parts of the product indicated in the Cleaning chapter can be washed in a washing machine at 30 ° C.
-
Do not iron the product, except for the parts of the product indicated in the Cleaning chapter.
-
This product is not intended for medical use in hospitals.
-
The product should cool down before storage.
-
The product may be used only with the types of removable elements specified in the product’s marking.
-
Do not use the device on adjustable beds or if the device is used on an adjustable bed, check that the product and cord cannot get stuck or corrugated, eg on hinges.
-
The device is equipped with a fuse protecting against overheating, which should not work when used in accordance with the intended use of the equipment. If the fuse trips, the device will stop working, the equipment must be returned to the manufacturer or its representative for repair.
SYMBOL EXPLANATION (picture 2)
- Read the instructions for use.
- Do not bleach.
- Do not dry clean.
- Do not insert pins.
- Do not use folded or rucked.
- Not to be used by very young children (0-3 years).
- ONLY the internal removable synthetic wool lining can be hand washed in water. Recommended water temperature 30°C.
- Can be tumbled dried at low temperature.
- Only parts of the product indicated in the instructions can be ironed at a temperature of up to 110°C.
- Do not use the device near water, for example: in the shower, in the bathtub or above the basin with water.
BEFORE FIRST USE
- The product needs to be unfolded and laid flat before switching on. On initial use the heating pad may smell of synthetic material. However, this odor will disappear after a short while.
- We recommend that you switch your product to the maximum setting for 30 minutes before bedtime then reduce to your desired heat setting. You must switch OFF prior to sleeping.
- Always use the heating pad with the cloth cover with zipper (2), even if you are using essential oils or ointments; this is necessary to avoid damage to an inside synthetic cover (4).
DESCRIPTION OF THE DEVICE
- 1. Controller
- Removable pillowcase with zipper
- Pocket to heat up hands
- Inside synthetic cover
- Zipper
- Power switch
- Heating button (1-8 levels)
- Timer button
- Heating level indicator
- Timer setting indicator 30-60-90-120 minutes
USING THE DEVICE
Connect the power cord to a power outlet. To switch on the device turn the
power switch (6) to position “ON”.
Press the heating button (7) to set up suitable level of temperature from
available 8 levels of temperature. Number 1 means lowest heating temperature,
the number 8 means maximum temperature. You should not use your hands to gauge
the pillow temperature because hands are much less sensitive to heat than the
other surfaces of the human body. A temperature, which may feel tepid for your
hands, may feel unpleasantly hot on your body.
Press the timer button (8) to set up desired time the pillow will heating you.
After desired time passed the device will be switch off automatically. By
repeat pressing the timer button (8) you choose desired time between 30 or 60
or 90 or 120 minutes heating time period.
To switch off the device turn the power switch (6) to position “OFF”.
STORAGE
Always allow the product to cool down before folding and storing. If you wish to do not use the product for longer time roll or fold it loosely and store in a bag. Avoid creating sharp creases in the product; for example do not store it under other items that may result in bending the inside heating wires.
CLEANING
The pillowcase (2) can be hand or machine washed in 30 degree of Celsius water
temperature. Unplug device, open the zipper (5) to take out of the inside
synthetic cover (4). The removable pillowcase with zipper (2) is the only one
part that can be washed in water.
Fold and presoak the removable pillowcase with zipper (2) for 15 minutes in a
mild soap and lukewarm water solution. Ensure the water temperature is less
than 30°C.
Wash on the delicate cycle for few minutes. Rinse in fresh lukewarm water.
Gently stretch the product to its original size. Air dry over a clothes line.
DO NOT use clothes pegs or clips of any kind. The pillowcase (2) can be ironed
at a temperature of up to 110°C.
WARNING: Before putting the removable pillowcase (2) on the inner
synthetic cover (4) again, make sure it is completely dry. Do not use the
device when it is damp or wet.
TECHNICAL DATA
Nominated power input : 45W
Maximum power : 80W
Supply voltage : 220-240V ~ 50Hz
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may effect the environment. Do not dispose this appliance in the common waste bin.
AFTER SALE SERV:ICE NOTICE
If you want to buy spare parts or make any complaints: please contact the seller who issued the receipt directly.
