FIRSTIME CO 916xAgv2rnL Antique Farmhouse Contour Wall Clock Instructions
- June 14, 2024
- FIRSTIME CO
Table of Contents
FIRSTIME CO 916xAgv2rnL Antique Farmhouse Contour Wall Clock
STEP 1
Set the time by turning the adjustment wheel on the back of the clock
mechanism in either a clockwise or counterclockwise direction until the hands
indicate the correct time.
STEP2
To activate your clock, install a new, branded alkaline battery as indicated
by the symbols on the battery case. Old or poor-quality batteries may cause
your clock to lose time or stop.
STEP3
Install adequate hanging hardware, not included, based on the type of wall,
the weight of the clock, and the hanger size. Screws and anchors are
recommended for heavy clocks.
FULLY INSTALLED
Use the built-in hanger on your clock to place it on the wall, then installation is complete.
TROUBLESHOOTING
OPTION A
If the clock isn’t working, check if the metal prongs in the battery case are touching both ends of the battery and carefully angle them outward until they make contact with the battery.
OPTION B
If the hands are crossing, separate them by rotating the adjustment wheel on the back. Hands should be parallel to each other.
OPTION C
If the hands are loose, unscrew the back of the clock to access the hands and press each hand and the centre pin onto the shaft securely. Hands can also be bent slightly if they are touching before reassembling.