FirsTime Co Grandview Instruction Manual
- June 14, 2024
- FIRSTIME CO
Table of Contents
FirsTime Co Grandview Instruction Manual
PARTS
2 PC hangers (style may vary)
2 PC hanging hardware (not included)
STEP 1
Measure the distance between the 2 hangers (A) on the back of the mirror or
determine the desired location for a mirror with 1 hanger.
STEP 2
Mark the position of the hanger(s) (A) on the wall, Do not add picture wire
between the 2 hangers. Mirrors can be heavy, and the wire may not support the
weight.
STEP 3
Install adequate hanging hardware (B), not included, based on the type of
wall, weight of the mirror, and the hanger size. Screws and anchors are
recommended.
FULLY INSTALLED
Use the built-in hanger(s) (A) on your mirror to place it flat on the wall, then installation is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>