STOREMIC SMBTC02 Toilet Seat Soft Close Instruction Manual
- June 15, 2024
- STOREMIC
Table of Contents
STOREMIC SMBTC02 Toilet Seat Soft Close
Product Information
The product is a soft-close toilet seat designed to provide a comfortable and convenient experience. It has a maximum weight capacity of 150 kg and is made to last. The toilet seat should not be slammed shut to extend its lifespan. It is important to avoid exposing the seat to direct sunlight or high temperatures.
Specifications:
- Maximum Load: 150KG
Product Usage Instructions
Tools Needed (Not Included)
- 01 x 1
- A x 2
- B x 2
- C x 2
- D x 2
- E x 2
- F x 2
Installation Steps:
- Insert the expansion anchors [A] into the toilet.
- Thread the bolts [D] through hinges [C] and the toilet.
- Attach the washers [B] and nuts [E] to the other end of the bolts. Do not fully tighten the bolts yet.
- Align the holes on the toilet seat to both hinges.
- Push the toilet seat into the hinges.
- Adjust the toilet seat until it is centered.
- To remove the toilet seat, press the quick-release button and lift it off the hinges.
- Tighten the bolts [D] further while holding the nuts [E] underneath.
Frequently Asked Questions (FAQ)
-
Q: What is the maximum weight capacity of the toilet seat?
A: The maximum weight capacity of the toilet seat is 150 kg. -
Q: How should I install the toilet seat?
A: Follow the installation steps provided in the user manual. Make sure to align the holes on the toilet seat to the hinges and tighten the bolts securely. -
Q: Can I expose the toilet seat to direct sunlight?
A: It is not recommended to expose the toilet seat directly to sunlight for long periods as it may affect its durability. Avoid any direct strong light or high temperature.
Important Note
- Please read the instructions carefully to get to know the product. Follow the instructions to install the toilet seat correctly.
- Please keep the instructions after reading. If you have any concerns or questions, please customer service at support@storemic.com.
- Please do not open the toilet seat lid over 105° before you fix the seat on the ceramic toilet bowl.
Maintenance
- Wipe the toilet seat with a soft wet cloth.
- Clean the toilet seat using neutral cleaner, and dry it with a clean cloth.
Cautions
- To extend the lifespan of the soft-close toilet seat, do not slam shut the seat.
- Maximum load 150 kg. Do not exceed the maximum weight capacity.
- Do not expose the toilet seat directly to sunlight for long periods. Avoid any direct strong light or high temperature.
Tools Needed
Tools Needed (Not Included)
Package Contents
Installation Instruction
Insert the expansion anchors [A] into the toilet. Thread the bolts [D] through hinges [C] and toilet, and then attach the nuts [E] and washers [B] to the other end of the bolts (DO NOT fully tighten the bolts).
Align the holes on the toilet seat to both hinges and push the toilet seat into the hinges. Adjust the toilet seat until it’s centered.
Press the quick-release button to remove the toilet seat from the hinges. Tighten the bolts [D] further while holding the nuts [E] underneath.
Add the hinge caps and reattach the toilet seat.
Contact Information
860-00066-01 Rev00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>