aenayrim YC-WH008 Magsafe Car Mount Charger User Manual
- June 15, 2024
- aenayrim
Table of Contents
aenayrim YC-WH008 Magsafe Car Mount Charger
Specifications
The parameters above are derived from the laboratory of AENAYRIM. The actual parameters may differ from product to product or from other factors. All images shown here are for reference only.
Overview
Fittings Included
Installation Instructions
Operating Instructions
- The charger shall be used under the following3 usage conditions: CD Use without a magnetic ring: iPhone X/ newer series phones
- The phone will be automatically attached to the charger.
- Use without a magnetic ring: iPhone X/ newer series with Magsafe cases
- Use with magnetic ring: iPhone X/ newer series with non-magnetic case
Assembling the Magnetic Ring
There are two ways to paste the magnetic ring.
- Stick on the back of the phone (need to stick the transparent sticker)
- Stick on the back of the phone case (no need to stick the transparent sticker)
Instructions(with the transparent sticker)
- Use a cleaning wipe to clean the back of the phone(or phone case)
- If use a phone case, INSTALL the magnetic ring OUTSIDE of the phone case
- Remove the cover of the transparent sticker, put it at the center of the back of your phone or phone case
- Tear off the paper of the magnetic ring and paste it onto the sticker, and the installation is completed.
Note : After pasting the magnetic ring, please wait for24 hours. Then this magnetic wireless car charger will hold your phone firmly.
Product Structural Features
- This product is a car mount with a built-in high-speed wireless charger. It supports the use of the iPhone X and higher.
- The rear fixed screw and expandable clamp design are compatible with air vent blades ranging from 3mm to 30mm, ensuring broad compatibility.
- It features built-in foreign object detection and temperature sensing chips for automatic overheat protection and foreign object detection.
- The magnet utilizes N52 neodymium iron boron, providing strong and stable magnetic attraction.
- Crafted from aluminum alloy, the product boasts a sleek and compact design with smooth and effortless extension.
Attention
- Avoid dropping.
- Do not install while driving.
- Do not install the car mount in places that interfere with the air bag or driving.
- Please keep this product away from any magnetic items; otherwise, demagnetization might happen.
- Keep the car mount away from children.
- Make sure the wireless charger’s main unit and components are assembled correctly and the wireless charger’s rear fixing hook is securely attached to the outlet.
- Connect the wireless charger to the car or the car charger’s TYPE-C port; place devices with wireless charging capabilities in the designated area for automatic charging.
- This wireless charger has a sensing distance of less than or equal to 5mm. It won’t function properly if the sensing distance exceeds 5mm or if foreign objects interfere with it.
- Verify that the wireless charger is properly connected and that your device supports wireless charging and is compatible with this product.
Warranty Clause
- The warranty for the product is for a period of 12 months from the original date of purchase.
- The warranty applies only to the original consumer purchaser of the product (the “Consumer”) and is not assignable or transferable to any subsequent consumer.
- The warranty does not apply if the product has not been used in accordance with the instructions or in its normal and customary manner.
Contact Information
Manufacturer : YAO5YAO LIMITED
Address : 3rd Floor Unit 100 25-29 Clements Road, llford, London, IGl
lBH, United Kingdom
Service email: support@aenayrim.com
Phone : 07561014758
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>