THRONMAX Stream Go X1 Webcam Instruction Manual
- June 12, 2024
- THRONMAX
Table of Contents
THRONMAX Stream Go X1 Webcam
Product Information
The THRONMAX webcam is a device that allows you to capture video and audio through your PC or TV STB. It features a lens, mount bracket, microphone, power indicator, signal indicator, and tripod screw. The webcam can be easily connected to your device via a USB socket.
Product Usage Instructions
- Plug the THRONMAX webcam into the USB socket of your PC or TV STB.
- Wait for approximately one minute to allow the webcam to install automatically.
- Ensure that the lens is positioned correctly for capturing video.
- Adjust the mount bracket to secure the webcam in place.
- If you wish to utilize the microphone, position it appropriately for capturing audio.
- Observe the power indicator to ensure the webcam is receiving power.
- Check the signal indicator to verify that the webcam is functioning properly.
- If desired, attach the webcam to a tripod using the tripod screw for stability during use.
Please note that all rights regarding the THRONMAX webcam are reserved.
Overview
| 1 .Lens | 2. Mount bracket | 3.Microphone |
|---|---|---|
| 4.Power indicator | 5.Signal indicator | 6.Tripod screw |
| 7. Privacy cover |
GETTING START WITH VIDEO CALLING
To take advantage of video calling,both you and the person you call must install video calling application, such as Skype, Zoom.
- A computer with speaker(or a headset) and a microphone(the webcam has built-in microphone);
- A broadband Internet connection(e.g.,DSL,T1,or cable);
- Please check your preferred video calling application requirements, (requirements may vary between different applications,but usually a minimun of 2Mbps upload speek is required);
PLACE YOUR WEBCAM
- Rotate the mount bracket and place the webcam on the monitor.
- You can place the webcam on the desktop as drawing.
- You also can mount the webcam to a tripod as you need.
QUESTIONS & ANSWERS
Q:How do I know if my camera is recognized by the op erating system?
A:Connectthe camera in any USB2.0/3.0 port. Once the camera is connected,it
takes a few moments before the camera is recognized. To ensure the camera has
installed correctly, check the following:
Under Control Panel>System and Security>System>Device Manager
Q:How do I know if my video calling application is using your webcam?
A:AII video application have an option setting to review the audio and video
device.
Using the video application review the followings:
- The Audio selection to ensure the USB2.0 camera microphone is selected.If not, change the selection to USB2.0 camera.
- Pro Audio /Video – výběr USB 2.0 mikrofon a USB 2.0 webkamera
- The video selection to ensure the USB2.0 is selected.If not, change the selection to the USB 2.0 camera.