WIWAV WDH-16GT-DC Unmanaged 16 Port Gigabit Industrial Ethernet Switches Instruction Manual

WIWAV WDH-16GT-DC Unmanaged 16 Port Gigabit Industrial Ethernet Switches

WDH-16ET-DC / WDH-16GT-DC

Overview of the device elements
Figure 2-8 shows the mechanical dimension details of the various 16 Port WDH series models.

• 16 x RJ45 socket for 10/100/1000 Mbit/s or 10/100Mbit/s Twisted Pair connections

• 5-Pin pluggable terminal block

• LED display element for device status

• Fast Data Transmission

• Overload, Reverse connect protection

• Metal Brackets for DIN and Multi-Mounting

• WIWAV 16 Port industrial ethernet switch provides top performance in a wider range of operating temperatures than conventional network switches, making it ideal for factories and warehouses.

• The 16 Port series give you full/half-duplex auto-negotiation and auto MDI/MDIX operation, enabling you to connect your network devices quickly and easily with little to no configuration required.

FEATURES & BENEFITS| COMPACT SIZE| Compact 16-port Ethernet Switch with 10/100 or 1000Mbps automatic MDI/MDI-X crossover for plug-and-play
---|---|---
REDUNDANT POWER| The 16-port network switch has dual redundant power inputs with overload and reverse current protection
FAST DATA TRANSMISSION| Each port supports both 10/100 or 1000Mbps speed auto negotiation, Supports IEEE 802.3, 802.3u, 802.3x standard
ROBUST AND RELIABLE| Can be used in extreme industrial environments; Supports a wide range  of operating temperatures -22°F~167°F (-30°C~+75°C)
EASY TO USE| DIN rail mountable with built-in bracket, Robust IP30-rated housing

Datasheet 2-29 Front Panel

• After the working voltage is set up, the software starts and initializes itself.
• Afterwards, the device performs a self-test. During this process, various LEDs light up

operation
None| Supply voltage is too low, Device is not ready for operation
LINK&ACT| Ports State| Yellow &Green| Lights up| Device detects a valid link
Flashing| Device is transmitting and/or receiving data
None| Device detects an invalid or missing link

Datasheet 2-30 Slide Panel

Datasheet 2-31 Rear Panel

rail mounting devices.
Metal Brackets| With “L” shaped metal brackets, More easy to mounting on equipment racks and cabinets.

Datasheet 2-32 Product Specifications

Interfaces

WDH-16ET-DC| 16 x 10M/100M BASE-T Ethernet Port (RJ45) connectors
WDH-16GT-DC| 16 x 10M/100M/1000M BASE-T Ethernet Port (RJ45) connectors
Specifications
Standards| IEEE802.3 10Base-T / IEEE802.3u 100Base-TX / IEEE802.3ab 1000Base-T
MAC Table| 8K| Packet Forwarding Rate| 2.38Mpps / 23.8Mpps
Packet Buffer| 1.75M / 4.1M| Switching Delay| <5us
Power Consumption
Max. Power Consumption| <3W / <10W| No-load Power Consumption| <2W / <3W
Connectors and Cabling
Ethernet Ports| 100 Meter ( RJ45 )| Fiber Slot| None
Power Terminal| 5 x 5.08mm terminal block| PoE Function| Not Support
Safety Certifications & Compliance Specifications
Environmental Regulation| RoHS / REACH（SVHC）| QMS| ISO9001
Compliance Marking| UL / cUL / IEC EN 62368-1 / FCC (North America) / CE (Europe) / PSE (Japan)
| FCC 47 CFR Part 15, Subpart B | EMC Directive 2014/30/EU
| EN 61000-4-2 ESD Level 4 (±8kV Contact Discharge ±15kV Air Discharge), EN 61000-4-
EMI and EMC Compliance| 3 RS Level 4 (30V/m 1kHz), EN 61000-4-4 EFT Level 4 (4kV 2kV), EN 61000-4-5 Surge
Reliability Testing| Level 4 (4kV Line to Ground), EN 61000-4-6 CS Level 3 (10Vrms 1kHz), EN 61000-4-8
| PFMF Level 4 (30A/m) | Mechanical Shock Test / IEC 60068-2-27:2008, Sinusoidal
| Vibration Test / IEC 60068-2-6:2007, Free Fall / IEC 60068-2-31:2008
Environmental Specifications
Operating Temperature| -22℉~167℉ (-30℃~75℃)| Storage Temperature| -49℉~185℉ (-45℃~85℃)
Humidity| 5%-95% (Noncondensing)| MTBF| 357,000 hours
Mechanical
Housing| Metal & Fanless| Degree of Protection| IP30
Weight| 0.8kg| Mounting| DIN-Rail / Wall / Flat / Hang
Dimensions| W: 45mm x H: 178mm x D: 120mm (Not including DIN rail and accessories)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>