perle IDS-104FE 5 Port Industrial Ethernet Switches User Guide
- June 15, 2024
- perle
Table of Contents
**perle IDS-104FE 5 Port Industrial Ethernet Switches User Guide
**
Port Industrial Ethernet Switches | IDS-104FE
IDS-104FE Industrial Ethernet Switches
port Compact DIN Rail Switches
- 4 x RJ45 ports with 10/100 Mbps on all ports
- 1 x SC or ST port for 100Base-FX
- Redundant dual power input 12/24/48 VDC
- Reverse polarity protection
- Fan-less design with no moving parts
- 10 to 60C industrial operating temperature support
- QoS (Quality of Service) prioritized messages
With a combination of four Fast Ethernet copper ports, and one Fast Ethernet fiber port for long distance connectivity, Perle IDS-104FE Industrial Ethernet Switches are designed for easy deployment in industrial environments with harsh operating conditions and limited space. Designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, infrastructure, transportation, security, oil and gas, and mining the IDS 104FE Switches are economical easy-to-use devices, that provide essential industrial Ethernet networking functionality.
These unman aged switches support 9 to 55VDC redundant power input and provide a relay alarm for power failure. The full/half-duplex auto-negotiation and auto MDI/MD IX operation simplifies installation and setup for convenient connection of a variety of network devices. And, QoS support allows for traffic prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP, these rugged, DIN rail mountable switches with metal housing provides security and easy installation (mounting kit is included).
Hardware & Technical Specifications: IDS-104FE Industrial Ethernet Switches
Interfaces
RJ45| 4 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft) Auto-
negotiation Auto-MDI/MDIX-crossover for use with either crossover over
straight-through cable types Ethernet isolation 1500 V
100FX Fiber| IDS-104FE-M2SC2: 1 x Multi Mode (SC) – 2Km IDS-104FE-M2ST2: 1 x
Multi Mode (ST) – 2Km IDS-104FE-S2SC20: 1 x Single Mode (SC) – 20Km IDS-104FE-
S2ST20: 1 x Single Mode (ST) – 20Km
Power
Power Input| 12/24/48VDC (9-55VDC)
Power Consumption| 1.82W Max. 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC
Maximum Current Consumption @ 24VDC| 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC
Maximum Current Consumption @ 24VDC| 0.14A@12VDC /
0.07A@24VDC, 0.038A@48VDC
Power Connector| 3-Pin Removable Terminal Block
Overload Current Protectio| Reset-able fuse provides overload current
protection
Reverse Polarity Protection| The positive and negative inputs can be reversed
providing safe and simple power connectivity.
Switch Properties
Standards| IEEE 802.3u 100BASE-TX/FX IEEE802.3x full-duplex flow control IEEE
802.3az Energy Efficient Ethernet IEEE 802.1p Quality of Service (QoS)
Processing Type| Store-and-Forward Auto Negotiation Half-duplex back-pressure
802.3x full-duplex flow control Auto MDI/MDIX
MAC Address Table Size| 1K
Packet Buffer Memory| 448 Kbps
Jumbo Frame Size| No
Forward/Filtering Rate| 14,880pps for 10Mbps 148,810pps for 100Mbps
Indicators
Power LED| This LED is green when power is applied
RJ45 / SFP Ethernet LED| Link/Activity (Green), Speed (Yellow)
Environmental Specifications
Operating Temperature Ranges| -10 to 60°C (14 to 140°F)
Storage Temperature Range| -40 to 85°C (-40 to 185°F)
Operating Humidity Range| 5% to 90% non-condensing
Storage Humidity Range| 5% to 95% non-condensing
Operating Altitude| Up to 3,048 meters (10,000 feet)
Chassis| Plastic with an IP30 ingress protection rating
Din Rail Mountable| DIN Rail attachment included. Mounts to standard 35 mm DIN
rail in accordance with DIN EN 60175.
Maximum Heat Output| 6.22 BTU/Hr (max.)
MTBF| 710611 hours MTBF Calculation model based on MIL-HDBK-217-FN2 @ 25°C
Product Weight and Dimensions
Weight| 0.2Kg / 0.44lbs
Dimensions| 26 x 70 x 110mm / 1.02″ x 2.76″ x 4.33″ (W x D x H)
Packaging
Shipping Weight| 0.34Kg (0.75lb.)
Shipping Dimensions| 30 x 76.3 x 110mm, 1.18″ x 3.05″ x 4.4″ (W x D x H)
Contents Shipped| Industrial Ethernet Switch with DIN Rail attachment Terminal
block Installation guide
Standards and Certifications
Safety| UL 62368
EMC Emissions| FCC Part 15 Class A VCCI Class A EN 61000-3-2 EN 61000-3-3 EN
61000-6-4
EMC Immunity| EN 61000-6-2 EN 61000-4-2 (ESD) EEN
61000-4-3 (Radiated RFI) EN 61000-4-4 (Burst) EN 61000-4-5 (Surge: ±4kV line-
to-ground) EN 61000-4-6 (Induced RFI) EN 61000-4-8 (Magnetic field)
Industrial| IEC 60068-2-6 Fc (Vibration) IEC 60068-2-27 Ea (Shock)
Laser Safety| EN 60825-1 Fiber optic transmitters on this device meet Class 1
Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with
21CFR1040.10 and 21CFR1040.11.
Environmental| Reach, RoHS and WEEE Compliant
Other| ECCN: 5A991 HTSUS Number: 8517.62.0020 5 year warranty
Fiber Specifications
| Fiber’
Type| Transmit
(dBm)| Receive
(dBm)| Power
Budget
(dB)| Wavelength
(nm)| IEEE| Core
Size
(urn)| Modal
Bandwidth
(MHz Km)| Max
Operating
Distance
(Km / mi)
---|---|---|---|---|---|---|---|---|---
MM| Max| PAM| Max
IDS-| MMF| -23.5| -14| -31| 0| 7.5| 1310|
100Base-| 50| 200| 2km
104FE-| (Duplex| | | | | | | FX| | |
| | |
M2SC2| SC)| -20| -14| | | 11| | | 62.5| |
IDS-| MMF| -23.5| -14| -32| -8| 8.5|
1310| 100Base-| 50| 200| 2km
104FE-| (Duplex| | | | | | | FX| | |
| | |
M2ST2| ST)| -20| -14| | | 12| | | 62.5| |
IDS-| SMF| -20| 0| -32| 0| 12| 1310| 100Base-| 9/125/um|
200| 20km
104FE-| (Duplex| | | | | | | FX| | |
S2SC20| SC)| | | | | | | | | |
IDS-| SMF| -15| -8| -32| -3| 17| 1310|
100Base-| 9/125/um| 200| 20km
104FE-| (Duplex| | | | | | | FX| | |
S2ST20| ST)| | | | | | | | | |
IDS-104FE Industrial Ethernet Switches
Product Image| **Description| Power Cord| Product
Number
---|---|---|---
**| IDS-104FE-M2SC2 Industrial Switch with 5-ports: 4 x 10/100Mbps RJ45
ports and 1 x 100Base-FX, 1310nm multimode port with duplex SC connector [2
km/ 1.2 miles].-10 to 60C operating temperature.| None| 07017410
IDS-104FE-M2ST2 Industrial Switch with 5-ports: 4 x 10/100Mbps RJ45 ports and
1 x 100Base-FX, 1310nm multimode port with duplex ST connector [2 km/ 1.2
miles].-10 to 60C operating temperature.| None| 07017420
IDS-104FE-S2SC20 Industrial Switch with 5-ports: 4 x 10/100Mbps RJ45 ports and
1 x 100Base-FX, 1310nm multimode port with duplex SC connector [20 km/ 12.4
miles]. -10 to 60C operating temperature.| None| 07017430
IDS-104FE-S2ST20 Industrial Switch with 5-ports: 4 x 10/100Mbps RJ45 ports and
1 x 100Base-FX, 1310nm multimode port with duplex ST connector [20 km/ 12.4
miles]. -10 to 60C operating temperature.| None| 07017440
References
- 5-Port Industrial Ethernet Switches | IDS-104FE | Perle
- Environmental Policy | Fiber & Serial to Ethernet | Perle
- 5-Port Industrial Ethernet Switches | IDS-104FE | Perle