65 GHU 7800 B TV

Product Information

Specifications

• Model: 65 GHU 7800 B
• Language: English

Installation and Safety

Before setting up the TV, please read the installation and
safety guidelines provided in the user manual.

General Information

The television comes with unique features such as receiving
digital stations and the SCR System. It also provides energy-saving
options and notes on still images.

Packing Contents

• Standard accessories
• Optional accessories

Connection/Preparation

To connect the TV, follow these steps:

1. Connect the antenna to the TV.
2. Connect the power cable to the TV.

Installation or Hanging

Refer to the user manual for detailed instructions on how to
install or hang the TV.

Overview

The TV has various connections and modes. You can switch it on
from standby mode or put it into sleep mode. The user manual
provides detailed information on these functions.

Settings

To configure settings, follow these steps:

1. Connect the TV to the home network.
2. Tune television channels.
3. Search for satellite, cable, and terrestrial channels.
4. Edit digital channels.

Picture/Sound Settings

You can adjust picture and sound settings on the TV. Refer to
the user manual for instructions on how to make these
adjustments.

Functioning of the TV – Basic Functions

The TV has basic functions such as switching on and off,
selecting the TV mode, selecting a signal source, adjusting the
volume, and muting. The user manual provides detailed instructions
on these functions.

Functioning of the TV – Additional Functions

Additional functions include changing the picture mode, picture
format, speakers, and power settings. Refer to the user manual for
instructions on how to use these functions.

Functioning of the TV – Advanced Functions

The TV also offers advanced functions such as audio language
selection, blue screen settings, default channel settings,
interaction channel settings, MHEG PIN protection, subtitles,
teletext language selection, BISS key encryption technique,
automatic shut down, TKGS settings, signal information, and version
information. The user manual provides detailed instructions on
these functions.

Electronic TV Guide

The TV comes with an electronic TV guide. Refer to the user
manual for instructions on how to use this feature.

HBBTV Mode

The TV supports HbbTV. Refer to the user manual for instructions
on using HbbTV and additional functions for video indexes.

Teletext Mode

The TV offers two text modes: TOP text or FLOF text mode and
normal text mode. Refer to the user manual for instructions on how
to switch between these modes.

USB Recording

You can record and play television programs using an external
data medium. Refer to the user manual for instructions on
recording, playing, and managing recorded files.

USB Process

The TV supports various file formats for external data mediums.
Refer to the user manual for instructions on connecting, removing,
and playing media files from external devices.

Grundig Android TV

The TV is equipped with Grundig Android TV features. Refer to
the user manual for instructions on accessing the home menu,
installing apps from Google Play Store, starting installed
applications, adding favorite applications to the home menu,
removing favorite applications, sorting applications, removing
installed applications, force stopping an app, clearing application
data and cache, managing application permissions, and using
Chromecast.

FAQ

Q: How do I connect the antenna and power cable?

A: To connect the antenna, follow the instructions provided in
the user manual. For the power cable, simply plug it into a power
outlet and connect it to the TV.

Q: How do I switch on the TV from standby mode?

A: To switch on the TV from standby mode, refer to the
instructions in the user manual.

Q: Can I adjust the picture and sound settings?

A: Yes, you can adjust picture and sound settings on the TV.
Please consult the user manual for detailed instructions.

Q: How do I record television programs?

A: The TV supports USB recording. Refer to the user manual for
instructions on how to connect an external data medium and set up
recording.

Q: Can I install apps on the Grundig Android TV?

A: Yes, you can install apps from the Google Play Store on the
Grundig Android TV. The user manual provides instructions on how to
do this.

TV
User Manual
65 GHU 7800 B
EN

TABLE OF CONTENTS————————————————

5 INSTALLATION AND SAFETY
7 GENERAL INFORMATION
7 Television’s unique features 7 Receiving digital stations 7 SCR System 8 Things to do for energy saving 8 Notes on still images
9 PACKING CONTENTS
9 Standard accessories 9 Optional Accessories
10 CONNECTION/ PREPARATION
10 Connecting the antenna and the power cable
11 Installation or hanging
13 OVERVIEW
13 Connections of the television 14 Switching the TV on from the standby
mode 14 Switching the TV to sleep mode, and
turning it on from the sleep mode
16 SETTINGS
16 Settings for connecting to the home network
16 Tuning television channels 19 Searching for satellite channels 21 Searching for cable channels 21 Searching for terrestrial channels 22 Editing digital channels
26 PICTURE / SOUND SETTINGS
26 Picture settings 28 Sound settings
31 FUNCTIONING OF THE TV – BASIC FUNCTIONS
31 Switching on and off 31 Selecting the TV mode 31 Selecting a signal source 31 Selecting the antenna type in TV mode 31 Selecting channels 31 Adjusting the volume 31 Muting

32 FUNCTIONING OF THE TV ADDITIONAL FUNCTIONS
32 Picture mode 32 Changing the picture format 32 Speakers 33 Power Settings
34 FUNCTIONING OF THE TV ADVANCED FUNCTIONS
34 Audio language 34 Blue Screen 34 Default Channel 34 Interaction Channel 34 MHEG PIN Protection 35 Subtitles 35 Teletext language selection 36 BISS Key 36 Biss key is an encryption technique. You
can watch a frequency encrypted with the Biss key by entering the Biss key. 36 Automatic shut down 37 TKGS Settings 38 Signal information 38 Version information
39 ELECTRONIC TV GUIDE
40 HBBTV MODE
40 What is HbbTV? 41 Using HbbTV 41 Additional functions for video indexes 41 HBBTV Settings
43 TELETEXT MODE
43 TOP text or FLOF text mode 43 Normal text mode

2 ENGLISH

TABLE OF CONTENTS————————————————

44 USB RECORDING
44 Information on recording and playing television programs
44 Possible restrictions on using an external data medium
45 Connecting external data medium 46 USB recording settings 47 Enabling and disabling the time shift
function 47 Time shift disc set-up 48 “Pausing” time shift and continuous
recording programs 48 Recording Programs 49 Adding recording timer 50 Editing recording timer 50 Deleting a recording timer 51 Playing 51 Deleting broadcasts from the recorded
files menu
52 USB PROCESS
52 File formats 53 Connecting external data medium 53 Removing the external data medium 54 Multi Media Player menu 54 Play basic functions 55 Additional playback functions

57 GRUNDIG ANDROID TV
58 Open Home menu 59 Home menu settings 61 Installing apps from Google Play Store 61 Starting an installed application 61 Add favorite applications to Home menu
applications tab 62 Remove favorite applications from home
menu apps tab 62 Sorting of applications in Applications tab 62 Removing an installed application 63 Force stopping an app 63 Clear application data 63 Clear application cache 63 Clear application defaults 64 Application notifications 64 Edit application permissions 64 Private application access 64 Application security and restrictions 65 Turning TV on with Chromecast 65 Using Chromecast on an Android or iOS
mobile device 66 Cast a tab in the Chrome browser on TV 66 Cast computer screen on TV 66 Cast music or video files from the
computer to the TV
67 DEVICE PREFERENCES
67 About 68 Date and time settings 69 Timer settings 70 Language settings 70 Keyboard settings 71 Storage settings 72 Store Mode settings 72 Google Assistant settings 72 Chromecast built-in 73 Screen Saver settings 73 Location settings 73 Usage and Diagnostic settings 74 Accessibility settings 75 Resetting the television to its original status
76 REMOTE CONTROLS AND ACCESSORIES

ENGLISH 3

TABLE OF CONTENTS————————————————

77 PARENTAL SETTINGS 77 Blocking a TV channel 77 Watching a blocked TV channel
78 PARENTAL SETTINGS 78 Program Restrictions 78 Blocking an external source 78 Watching a blocked external source 79 Changing the PIN code
79 PARENTAL SETTINGS
80 USING AN EXTERNAL DEVICE 80 CEC (Consumer Electronics Control) 80 CEC connection functions of the television 81 High definition ­ HD ready 81 Connection options 82 Connecting an external device 82 DVD recorder, DVD player, or video
recorder use 82 Hi-Fi system
83 OPERATION WITH COMMON
INTERFACE 83 What is common interface? 83 Inserting the CA module 83 Access control for CA module and smart
cards
84 NETWORK SETUP 84 Network connection 84 Wired network 85 Wired network settings 86 Wireless network 86 Wireless network configuration 87 Connecting the TV to a “hidden” network 88 Wireless manual network connection

89 DETAILED CHANNEL SETTINGS
89 Automatic search for satellite connected digital television stations
90 Manual scan for satellite connected digital television stations
92 Antenna settings for digital satellite channels and searching for channels automatically with DiSEqC 1.0/1.1
94 Antenna settings for digital satellite channels and searching for channels automatically with SCR system
96 Settings for antennae with motors (DiSEqC 1.2)
98 Searching for newly added digital channels with satellite update
98 Searching for cable-connected digital television stations automatically
99 Searching for cable-connected digital television stations manually
100 Setting up antenna-connected digital and analog television stations automatically
101 Updating antenna-connected digital television stations automatically
102 Setting up antenna-connected digital television stations manually
103 Setting up antenna-connected analog television stations manually
104 Service information for authorised dealers 104 Licenses 105 Notes for wireless (WLAN) connection 106 Disposing the packaging 106 Environmental note 107 Troubleshooting
109 GLOSSARY
113 INDEX

4 ENGLISH

INSTALLATION AND SAFETY ———————————-

Intended use
7 The TV set is designed for use in dry rooms.
7Use the TV set with the supplied stand or a suitable VESA bracket.
7The TV is primarily intended for the playback of TV programmes, streaming content and audio/video material from external devices. Any other use is strictly prohibited. It is not intended as an information display or for predominant use as a computer monitor. If a still image or a non-full-format image is displayed for an extended period, visible traces may remain on the screen for some time. This is not a defect that can be used as the basis for a warranty claim.
Interface criteria
This product has been manufactured in compatibility with Turkish Telecommunication networks.
Safety
WARNING:
Risk of electrical accident
IMPORTANT SAFETY INSTRUCTIONS – KEEP INSTRUCTIONS FOR FUTURE REFERENCE
Immediately followed by: Read all safety warnings, instructions, illustrations and specifications provided with this appliance.
7Standby LED turns off when the mains plug is disconnected. If Standby LED is lit then it means that your product is connected to mains.

7Do not dismantle the TV. Safety risks may arise and also the guarantee of the product can become void if the television is dismantled.

7 The TV can only be operated with the power cable or the AC/DC adapter supplied with the product.

7Do not operate the TV with a damaged power cable or AC/DC adaptor (if supplied).

7If the plug on the TV has an earthing contact, insert the plug only into a socket with an earthing contact.

7Plug your TV into the mains socket only after you have connected the external devices and the antenna.

7 Protect your TV set from moisture. Do not place any vessels filled with water (such as vases) on the TV.

Fire hazard

7

To prevent the spread of fire,

keep candles or other open

flames away from this product at

all times.

7 Do not cover the ventilation slots on the TV.

7 Always unplug the power plug and antenna plug during lightning and thunderstorm.

7Keep candles or other open flames away from the TV.

7Do not expose the batteries to extreme heat such as sunshine, fire or the like.

7Only use batteries of the same type (brand, size, properties). Do not use used and new batteries together.

ENGLISH 5

INSTALLATION AND SAFETY ———————————-

WARNING:
Injuries caused by falling TV
Never place the TV on an unstable surface. The TV may fall, causing serious injury, possibly leading to death in isolated cases. Observe the following precautions:
7 Make sure that the stand or other furniture you will place the TV on is robust enough to carry the television.
7 Make sure that the TV does not protrude beyond the dimensions of the furniture on which it is resting.
7 Do not place the TV on tall furniture that has the risk of tipping over such as cabinets, sideboards or bookcases. If you have no other choice, fix the furniture and the TV to the wall to prevent them from tipping over.
7 Do not place the TV on fabric or other materials located between the TV and furniture.
7 Instruct children that there is danger associated with climbing on furniture when the TV is to be reached.
7 Consider the above mentioned warnings whenever you change the location of the TV. NOTICE
Shortened service life due to high operating temperature
7 Do not place the TV next to heating units or in direct sunlight.
7 To ensure adequate ventilation, maintain clearance of at least 10 cm around the TV.
Discolouration of furniture due to rubber feet
7 Some furniture surfaces may discolor when they come in contact with rubber. To protect furniture, you can place a sheet made of glass or plastic under the stand. Do not use textile underlays or mats such as doilies.

Electromagnetic interference
7 Devices connected to he product (satellite receiver, DVD player, and etc.) or signal emitting devices (router and etc.) close to the product may cause disturbance in the image and noise in the sound.
7 Connection cables used on the product must be shorter than 3 m.
7 If the product cannot perform its function due to electrostatic discharge, the user may need to switch off and then switch on the product.
7 A shielded, HDMI-certified and ferrite cable must be used with the product.

Environmental information

7

Do not dispose of batteries with

the household waste. Used

batteries must be returned to

retail stores or public collection points You

help protect the environment in this way.

7 Be sure to dispose of packaging materials for your product separately according to the guidelines of local authorities so that they can be recycled in an environmentally safe manner.

7 Switch the TV set to stand-by if you will not use it for a while. In standby mode, the TV uses very little energy ( 0.5 W). If you do not use the TV set for an extended period, turn it off with the power switch or unplug the power cord from the socket.

7 Select a location where no direct sunlight falls on the screen. Thus, you can select a lower backlight and provide power saving.

7

Do not dispose of the product

along with normal household

waste at the end of its service

life. Take it to a recycling centre

for electrical and electronic equipment.

6 ENGLISH

GENERAL INFORMATION —————————————

Television’s unique features
7Android TV allows you to access your favorite TV shows, movies, subscription services, songs, pictures and games.
7Many features of the TV set require an Internet connection. The TV set is equipped with WLAN feature and a LAN port.
7 Your television set enables you to receive and watch digital stations (via DVB-S, DVB-T and DVB-C), including the High Definition (HD) ones. At present, reception for these digital television channels in High Definition is only possible in some countries in Europe.
7 Although this television meets the current DVB-S, DVB-T and DVB-C standards as of August 2012, its compatibility with future DVB-S digital satellite broadcasts, DVB-T digital terrestrial broadcasts and DVB-C digital cable broadcasts is not guaranteed.
7 This television can receive and process all unencrypted digital stations. This television set has an integrated digital receiver. The digital receiver unit converts the signals from digital stations to provide outstanding audio and picture quality.
7 The TV guide (only for digital stations) tells you of any schedule changes at short notice, and provides an overview of all the channels’ schedules for the next few days.
7 Wireless USB keyboard and mouse support of your television provides convenience to the user in internet applications.

7 With the Time Shift function, you can easily stop and resume a programme with the remote control in a fast and simple way. Programme is recorded to the external data medium.
7 You can save any digital TV channel you have chosen, if no limitation has been imposed by the broadcaster.
TV channel is transformed by the TV and saved to a USB external data medium.
You can recall and play saved programmes from the archive.
You may select another recording from the archive and watch it during a recording.
Receiving digital stations
7 To receive digital satellite stations (DVB-S) you need a satellite antenna.
7 To receive digital stations (DVB-T) you need a digital rooftop or indoor antenna (passive or active indoor antenna with its own power supply).
7 The antenna cable of the cable TV network that broadcast in DVB-C must be plugged into TV in order to receive the DVB-C broadcasts.
7 You can find the current transmission information on teletext from various broadcasters, or look in a TV guide or on the Internet.
7 Various digital television stations from private broadcasters are encrypted (DVB-S, DVB-T and DVB-C). Watching these stations is only possible with the appropriate CI module and a SmartCard. Ask your specialist dealer.
SCR System
Your TV supports SCR system (Single Channel Router). With SCR satellite system, several users can individually receive all signals from the satellite simultaneously.

ENGLISH 7

GENERAL INFORMATION —————————————
Things to do for energy saving
Those items mentioned below will help you reduce the consumption of natural resources as well as save your money by reducing electricity bills. 7 If you will not be using the TV set for several
days, the TV set should be disconnected from the mains for environmental and safety reasons. TV will not consume energy in this condition. 7 If the TV set has main switch, it will be enough to turn the TV off via main switch. TV will reduce energy consumption almost to Zero Watt. 7 Your device consumes less energy when brightness is reduced.
Notes on still images
Watching the same image for a long time on the screen may cause a still image remains feebly on the background. Feeble image(s) on the background is originated from LCD/LED technology and does not require any action under guarantee. To avoid such cases and/or minimize the impact, you may observe the tips below. 7 Do not allow the same TV channel to stay on
the screen for a very long time. Channel logos may cause this situation. 7 Do not allow the images, which are not full screen, to constantly stay on the screen; if not streamed in full screen format by the broadcaster, you can convert the images to full screen by changing picture formats. 7 Higher brightness and/or contrast values will lead this impact to appear faster; therefore, you are recommended to watch your TV in the lowest brightness and contrast levels.
Note on software update
Descriptions and images in the user manual may change with the TV software update.
8 ENGLISH

PACKING CONTENTS ———————————————–
1

3

2

4

5

6
7
User Manual

Standard accessories
1 TV 2 Stand 3 Remote control 4 Batteries for remote controls 5 Screws and installation instructions for stand 6 Brief Instruction 7 Power cord

Optional Accessories
Cleaning cloth Wall hanging screws
ENGLISH 9

CONNECTION/PREPARATION ——————————-
Connecting the antenna and the power cable

3

1

2

1 To receive digital satellite channels (DVB-S), connect the satellite antenna cable to the »SATELLITE« antenna socket on the television set;
and / or
2a For terrestrial digital stations (DVB-T), plug the cable of the rooftop, indoor antenna (passive or active indoor antenna with its own power supply) into the antenna socket »ANT IN« on the television set;
or
2b For digital stations of the cable TV network (DVB-C), plug the antenna cable into the antenna socket »ANT IN« on the television set.
Note: 7 When connecting an indoor antenna you
may have to try it out at different positions until you get the best reception.
3 Connect the power cable to the »AC IN« socket on the television.
4 Plug the power cable into the wall socket.

Note:
7 Plug the appliance into the mains socket only after you have connected the external devices and the antenna.
7 Do not use an adapter plug or extension cable which does not meet the applicable safety standards. Do not tamper with the power cable.

10 ENGLISH

CONNECTION/PREPARATION ——————————-

Installation or hanging
7 Select a location so that no direct sunlight falls on the screen.
Installation with stand 7 To mount the stand, refer to the installation
instructions included. 7 Place the TV set on a hard and level surface.
Installation preparation for VESA installation kit Contact authorised dealer to purchase the bracket. You will need the following 7 A pair of scissors, 7 A cross-tip screwdriver. Follow the installation instructions for the VESA installation kit. 1 Place the TV in the film on a smooth surface
with the screen facing down.
2 Cut open the film on the back side using the scissors.
3 Connect the required cables to the connectors on the TV. See the “Connections” section in this manual.
4 Tie the cables so they do not hang down onto the floor.
5 Screw the VESA bracket onto the television and mount it according to its installation instructions.

VESA

ENGLISH 11

CONNECTION/PREPARATION ——————————-

Inserting batteries into the remote control
1 Open the battery compartment.
2 Insert batteries as marked on the bottom of the battery compartment (2 × Micro/ R03/ AAA).
3 Close the battery compartment.

Note:
7 If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries.

7 The manufacturer accepts no liability for damages resulting from used batteries.

Environmental note

7

This symbol on the battery

or on the packaging

indicates that the battery

provided with this product

shall not be treated as

household waste. On certain batteries this

symbol might be used in combination with a

chemical symbol. The chemical symbols for

mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005%

mercury or 0.004% lead.

Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.

12 ENGLISH

OVERVIEW —————————————————————–
Connections of the television

COMMON INTERFACE

HDMI1

USB1

AC-IN

SERVICE

Optic Out USB2 (HDD) 5V/1A

HDMI3 (ARC)

HDMI2 SATELLITE ANT-IN
13/18V max.500mA

ENGLISH 13

OVERVIEW —————————————————————–

7 AC IN: Power cord input.
7 Service: Service only.
7 LAN: Network connection.
7 Optic Out: optical audio output.
7 USB(HDD): For external data media.
7 HDMI3 (ARC): Input for digital audio and image data.
7 HDMI2: Input for digital audio and image data.
7 SATELLITE: Input for satellite antenna signal. Suitable for single-cable SCR system.
7 ANT IN: For antenna cable (terrestrial antenna or cable connection).
7 U: Earphone output.
7 USB 1: USB socket for external data medium.
7 HDMI1: Input for digital audio and image data.
7 CI: For CA modules for receiving scramble channels.

Keypad
Switching the TV on from the standby mode 1 Press 8 to turn on the TV from the standby
mode.
Switching the TV to sleep mode, and turning it on from the sleep mode 1 The TV shall switch to sleep mode when 8 is
pressed shortly while the TV is on. 2 The TV shall switch on from the sleep mode
when 8 is pressed shortly while the TV is on
sleep mode.

14 ENGLISH

OVERVIEW —————————————————————–
Remote control

Turns on/off the television (stand-by)

Signal source

Switches the menus back one menu level
Play, Pause, Forward, Reverse. Displays information
Adjusts the volume Launches the Netflix
application. Launches the Youtube
application. Directly selects the
channels
Switches between teletext and TV modes
Cursor Control Moves the cursor up and down in the menus. Moves the cursor left/right in menus. Activates various functions.

Opens the Home menu; Exits the applications. In TV mode, opens the TV options menu
Selects the channels step by step Turns the sound on/off (mute) Launches the Prime Video application Launches the GooglePlay application
Selects subtitle Selects/activates various functions in menus
ENGLISH 15

SETTINGS ——————————————————————–

The Television is fitted with an “installation assistant”, which guides you step by step through the basic settings. Using the screen dialogue, the user guide enables supposedly complex settings and data entries to be presented simply and clearly for everybody. Pages and dialogue items appear on the screen, which identify the subsequent and likely operating steps. To support this, you will also see the required button symbols of the remote control. The basic settings in detail: ­ language and country selection; ­ pairing the remote control; ­ network configuration (if required); ­ logging in with Amazon; ­ Station settings (DVB-S, DVB-T and DVB-C).
Detailed settings can be found on pages 17 and 21.
Settings for connecting to the home network
Depending on the connection type of the home network, connect your television to the home network: ­ via a LAN connection or ­ without a cable via WLAN
Automatic LAN connection,
all data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically.
There are various options when using WLAN:
Automatic WLAN connection,
all data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from modem automatically. Depending on the router, you can use the following options: ­ Connection with network password.

Tuning television channels
Depending on the type of antenna connected, you can decide which channels you would like the television to search for.
DVB-S ­ On page 19, sets digital TV channels from satellite. You have two options for this search: ­ Basic setup that presets a standard choice. For example, Astra satellite 19.2° East; You just need to start the search; ­ the professional installation, which allows you to make all required settings and set parameters for your receiver system.
DVB-C ­ For setting up digital cable TV channels, see page 21
DVB-T ­ For setting up digital terrestrial TV channels, see page 21
Note:
7 See “Detailed Channel Settings” section starting from page 89 for more information on digital television channel settings.

16 ENGLISH

SETTINGS ——————————————————————–

First set-up and setting the TV
1 Connect the antenna and external device cables.
2 Insert the power plug into the socket.
3 Switch on the TV by pressing »8« on the
remote control. ­ The welcome menu shall be displayed on
the screen after a while.

Welcome

English (United States) Azerbaijan Bosanski Català Cestina Dansk Deutsch

4 Select language.
Note: 7 You may set up your TV using 2 methods.
­ »Quick Set-up« ­ If you have an Android phone, you may transfer the network settings and account settings easily from your phone.
­ »Manual Set-up« ­ If you do not own an Android phone, you may enter all settings manually.
­ Resume from article 5 for quick set-up; or
­ Resume from article 12 for manual set-up.

Quick Set-up
5 Select »Resume« and press »« to confirm.
6 Follow the instructions displayed on your TV and on the screen of your TV. ­ The »Services and Terms« menu is displayed when the set-up is completed.
7 Select »Accept« and press »« to confirm.
8 Select »Yes« to allow sharing of the location information of the device
or
select »No« and confirm with »« if you do
not want to share the location information.
9 Select »Yes« to contribute for the development of Android;
or
select »No« and confirm with »« if you do
not want to share the location information.
10 Select the applications you want to install from the list of the recommended applications and select »Continue« to
continue and confirm with »«.
11 Android set-up is complete. Press»>« to view the features of your device.
Note: 7 Resume from article 23 if you have
performed a Quick set-up.

ENGLISH 17

SETTINGS ——————————————————————–

Manual set-up
12 Select »Skip« and press »« to confirm.
13 Select your wireless network with »V« or
»« or press »«.
14 Enter the wireless network password with the screen keyboard, select » « and
press »«.
­ »Connect to network…….« message is displayed, and then »Successfully Connected to Internet« message is displayed.
15 Select »Login« and confirm with »«
or
to continue without logging in, select »Skip«
and confirm with »«. 16 Select »« and press »« to continue
after entering your e-mail address with the screen keyboard.
17 Select »« and press »« to continue
after entering your account password with the screen keyboard,
18 Follow the instructions displayed on your TV and on the screen of your TV. ­ The »Services and Terms« menu is displayed when the set-up is completed.
19 Select »Accept« and press »« to confirm.

20 Select »Yes« to allow sharing of the location information of the device
or
select »No« and confirm with »« if you do
not want to share the location information.
21 Select »Yes« to contribute for the development of Android;
or
select »No« and confirm with »« if you do
not want to share the location information.
22 Select the applications you want to install from the list of the recommended applications and select »Continue« to
continue and confirm with »«.
23 Android set-up is complete. Press »>« to view the features of your device.
24 Select the country.
25 Press the »« to set a password.
26 Enter the password »1 2 3 4« using »1…0« on the displayed password screen and
press »«.
27 Enter the password »1 2 3 4« again using »1…0« on the displayed confirmation screen. ­ »Select TV mode« menu shall be displayed.
28 Confirm »Home« by pressing »«;
or
Use »V or »« to select »Store« and
confirm with the »«.
­ »Home« ­ mode is optimized to provide energy efficiency when the TV is used in a household.
­ »Store« ­ mode is optimized to allow demo display on a store with fixed settings.

18 ENGLISH

SETTINGS ——————————————————————–

29 To turn on the integrated Chromecast
feature, select »On« and confirm with »«;
or
Use »V« or »« to select »Off« and
confirm with the »«.
Important: 7 To keep integrated Chromecast feature
continuously on increases the energy consumption.
30 Select the antenna type.
31 The next procedure depends on the selected antenna type. Follow the instructions on the screen. ­ For DVB-S (Satellite) reception, go to article 32
­ For DVB-C (Cable) reception, go to article 49
­ For DVB-T (Terrestrial) reception, go to article 54
Searching for satellite channels
32 Select » Satellite«. ­ »Satellite antenna type« menu shall be displayed.

Satellite Antenna Type

Single DiSEqC 1.0 DiSEqC 1.1 DiSEqC 1.2 Single Cable I

33 Confirm »Single Cable« with »«;
or
Depending on the satellite system you use, select »DiSEqC 1.0«, »DiSEqC 1.1«, »DiSEqC 1.2«, »Single Cable I«, »Single Cable II« or »Tone Burst« with »V« or »«
and confirm with »«.
­ »Select Operator« menu shall be displayed.

Select Operator

Standard TKGS

34 Confirm »General« with »«;
or
Select »TKGS« and press »« to confirm.
­ »LNB List« menu shall be displayed.

LNB List

Next

Turksat 42.0ºE

On

35 Select the satellite displayed on the list and
confirm with »«.
­ »LNB Settings« menu shall be displayed.

LNB Settings

Satellite Status
On
Satellite Selection
Turksat 42ºE
Scan Mode
Full
Scan Type
All
Store Type

36 Select »Satellite Status« as »On« with »«.

ENGLISH 19

SETTINGS ——————————————————————–

37 Select »Satellite Satellite Selection«. ­ »Satellite Selection« menu shall be displayed.

Satellite Selection
Please configure the Satellite Selection Use the ‘OK’ key to select a value, and `back’ key to return back to the previous page.

Astra4A/SES5 5ºE Eutelsat7A 7.0ºE Eurobird 9.0ºE Hotbird 13.0ºE Astra1 19.2ºE

38 Select the satellite you want to perform scan on with »V« or »« and confirm with
»«.
39 Select »Scan Mode«. ­ »Scan Mode« menu shall be displayed.

Scan Mode
Please configure the Scan Mode. Use the ‘OK’ key to select a value, and `Back’ key to return back to the previous page.

Network Full

43 Select »Store Type«. ­ » Store Type« menu shall be displayed.

Store Type
Please configure Store Type. Use the ‘OK’ key to select a value, and `Back’ key to return back to the previous page.

All Only Digital Channels Only Radio Channels

44 To select whether you want to search for digital channels (digital) only or radio channels (Radio) only or both (Digital+Radio), press »V« or »« to select »All«, »Only Digital Channels« or »Only
Radio Channels« and press »« to confirm.
45 Press » r « to return to the previous menu
after completing the settings.
46 Use »V« or »« to select »Next« and
confirm with the »«.
­ »Channel Scan« menu shall be displayed.

40 Select »Network« or »Full« with »V« or
»« and confirm with »«.
41 Select »Scan Type«. ­ »Scan Type« menu shall be displayed.

Scan Type
Please configure the Scan Type. Use the ‘OK’ key to select a value, and `Back’ key to return back to the previous page.

All Encrypted Channels Only Free

42 To select whether you want to search for free digital channels (free) only or encrypted digital channels (Encrypted) only or both (Free+encrypted), press »V« or »« to select »All«, »Encrypted Channels
Only« or »Free« and press »« to confirm.

Channel Scan
First, please connect with the satellite. Start the channel scan now? You may scan for channels from the Menu if you skip this step.

Scan Skip Scan

47 To start scanning for channels, select »Scan«
and press »« to confirm.
­ The »Scanning« menu shall be displayed and the scan for TV stations shall be started.
­ The scan is complete when the »FINISH« message is displayed.
48 Press »« to complete the set-up and exit.

20 ENGLISH

SETTINGS ——————————————————————–

Searching for cable channels
49 Select »Cable«. ­ »Select Operator« menu shall be displayed.

Searching for terrestrial channels
54 Select » Antenna«. ­ »Channel Scan« menu shall be displayed.

Select Operator
You may select only one operator.

Others

Channel Scan
First, please connect with the satellite. Start the channel scan now? You may scan for channels from the Menu if you skip this step.

Scan Skip Scan

50 Confirm the »Others« with »«;
­ »Channel Scan« menu shall be displayed.

Channel Scan
First, please connect with the satellite. Start the channel scan now? You may scan for channels from the Menu if you skip this step.

Scan Skip Scan

55 To start scanning for channels, select »Scan«
and press »« to confirm.
­ The »Scanning« menu shall be displayed and the scan for TV stations shall be started.
­ The scan is complete when the »FINISH« message is displayed.
56 Press »« to complete the set-up and exit.

51 To start scanning for channels, select »Scan«
and press »« to confirm.
­ »Cable Scan Configure« menu shall be displayed.
52 To start the channel scan, press »>«. ­ The »Scanning« menu shall be displayed and the scan for TV stations shall be started. ­ The scan is complete when the »FINISH« message is displayed.
53 Press »« to complete the set-up and exit.

ENGLISH 21

SETTINGS ——————————————————————–

Editing digital channels
Channels found at the end of the scan are stored separately for each broadcast source.
You can change the order of channels, skip channels, rename channels and delete the channel list via the channel management. You can also create and edit your favorites list.
Broadcast source selection The channel table for all sources as satellite (Standard), satellite (Operator), cable and antenna is stored separately. To edit, first select the broadcast source you will edit.
1 Select »TV« application from the Home
menu and press »«.
­ The TV mode of the broadcast source you are on shall be displayed.
2 Press »q«.
3 Select »Settings« with »>« and confirm with
»«.
4 Select »Channel« with »V« and confirm
with »«.
5 Select »Channel Set-up Mode« with »V«
and confirm with »«.
6 Select the source you want to edit from »Antenna«, »Cable«, »Satellite (Operator Mode)« or »Satellite Standard)« options
with »V« or »« and confirm with »«.
7 Press » r « to return to the previous menu or press »p« to return to Home menu.

Skip channel With »V«, »« or »P«, »PV« you can select the TV channels you want to skip during channel selection. It is possible to select channels that are skipped with the number buttons.
1 Press »q« in the TV mode.
2 Select »Settings« with »>« and confirm with
»«.
3 Select »Channel« with »V«, »«, and
confirm with »«. 4 Confirm »Channels« with »«.
5 Select »Skip Channel« with »V«, »«, and
confirm with »«.
­ Skip Channel menu shall be displayed.
6 Select the channel you want to skip to the list with »V« or »« and highlight it with
»«. ­The channel will be marked with »«.
Note:
< 7 Press » « to display the previous page in the skip channel menu, press »>« to view
the next page.
7 Press » r « to return to the previous menu or press »p« to return to Home menu.

22 ENGLISH

SETTINGS ——————————————————————–

Change channel location Change the location of the channels reciprocally. For example; Move channel 2 to channel 20, channel 20 to channel 2.
1 Press »q« in the TV mode.
2 Select »Settings« with »>« and confirm with
»«.
3 Select »Channel« with »V«, »«, and
confirm with »«. 4 Confirm »Channels« with »«.
5 Select »Change channel location« with
»V«, »«, and confirm with »«.
­ Change Channel Location menu shall be displayed.
6 Select the channel you want to move to the list with »V« or »« and highlight it with
»«. ­The channel will be marked with »«.
Notes:
< 7 Press » « to display the previous page in the change channel location menu, press »>« to view the next page. 7 If you change the channel order, the
channel numbers sent by the broadcaster will change.
7 Select the channel number you want to change with »V« or »«, and confirm with
»«.
­ The locations of the two channels change reciprocally.
8 Press » r « to return to the previous menu or press »p« to return to Home menu.

Move channel Move the channels to the channel location you want and edit the list.
1 Press »q« in the TV mode.
2 Select »Settings« with »>« and confirm with
»«.
3 Select »Channel« with »V«, »«, and
confirm with »«. 4 Confirm »Channels« with »«.
5 Select »Move Channel« with »V«, »«,
and confirm with »«.
­ Move Channel menu shall be displayed.
6 Select the channel you want to move to the list with »V« or »« and highlight it with
»«. ­The channel will be marked with »«.
Note:
< 7 Press » « to display the previous page in the move channel menu, press »>« to view
the next page.
7 If you change the channel order, the channel numbers sent by the broadcaster will change.
7 Move the channel to the new channel position with »V«, »« and confirm with
»«.
­ The channel is moved to its new location.
8 Press » r « to return to the previous menu or press »p« to return to Home menu.

ENGLISH 23

SETTINGS ——————————————————————–

Edit channel Rename channels.
1 Press »q« in the TV mode.
2 Select »Settings« with »>« and confirm with
»«.
3 Select »Channel« with »V«, »«, and
confirm with »«. 4 Confirm »Channels« with »«.
5 Select »Edit Channel« with »V«, »«, and
confirm with »«.
­ Edit Channel menu shall be displayed.
6 Select the channel you want to edit with
»V«, »«, and confirm with »«.
­ Channel information shall be displayed.
7 Select »Channel Name« with »V«, »«,
and confirm with »«.
8 To delete the current name, select » « with
»<«, »>«, »V« or »« and press »«.
9 Select the required character/number with
»<«, »>«, »V« or »« and move to the
next character with »«.
Do the same for all characters/numbers.
Note: 7 You can switch between uppercase/
lowercase letters using » « »«, and
switch between special characters/letters by using »=/#« »OK«.
10 To save the new name, select »« with
»<«, »>«, »V« or »« on the screen
keyboard and press »«.
11 Press » r « to return to the previous menu or press »p« to return to Home menu.

Delete channel list Delete the channel list of the selected broadcast source.
1 Press »q« in the TV mode.
2 Select »Settings« with »>« and confirm with
»«.
3 Select »Channel« with »V«, »«, and
confirm with »«. 4 Confirm »Channels« with »«.
5 Select »Delete The Channel List« with »V«,
»«, and confirm with »«.
6 Select »OK« with »<« or »>« to confirm the
deletion and press »«;
or
select »CANCEL« and press »« to cancel
it.
7 Press » r « to return to the previous menu or press »p« to return to Home menu.

24 ENGLISH

SETTINGS ——————————————————————–

Creating a list of favorites
You can select your favorite channels and save them as a list.
Notes: 7 favorite lists must be created separately for
all sources (satellite, cable and air).
7 You can save your favorite channels in 4 separate lists. Before adding channels to the favorite list, it is necessary to select the favorite list to be added.
1 Open the channel list with »« in TV
Mode.
2 Press »« (blue) to select the favorite list.
3 Select the favorite list to which channels will
be added with »<« or »>« (favorites 1 to
favorites 4).
4 Press » r « to return to the TV mode.
5 Select the channel to add to the favorites list with »V«, »« or »P«, »PV« or »1…0«.
6 Press »q« and select »Add to My favorites« with »«, and confirm with »«.
­The channel will be marked with »«.
Note: 7 Repeat steps 5 and 6 for other channels to
be added to the favorite list.

Moving channels in the favorites list Move favorite channels to the channel location you want and edit the list.
1 Open the channel list with »« in TV
Mode.
2 Press »« (blue) to select the favorite list.
3 Select the favorite list you want to edit with
»<« or »>« (favorites 1 to favorites 4).
4 Select the channel you want to move with »V« or »« and press »« (yellow).
5 Move the channel to its new position with
»V« or »« and confirm with »«.
Note: 7 Repeat steps 4 and 5 for other channels
you want to move.
6 Press » r « to return to the previous menu or press »p« to return to Home menu.
Deleting channels in the favorites list
1 Open the channel list with »« in TV
Mode.
2 Press »« (blue) to select the favorite list.
3 Select the favorite list you want to edit with
»<« or »>« (favorites 1 to favorites 4).
4 Select the channel you want to delete with »V« or »« and press »« (blue).
Note: 7 Repeat step 4 for other channels you want
to delete.
5 Press » r « to return to the previous menu or press »p« to return to Home menu.

ENGLISH 25

PICTURE / SOUND SETTINGS———————————-

Picture settings
1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Device Preferences« with »V« and
confirm with »«.
4 Select »Picture« with »V« and confirm with
»«.
­ »Picture« menu shall be displayed.

Picture

Picture Mode
Energy Saving

Backlight

100

Brightness

50

Contrast

50

Saturation

50

TONE

0

Sharpness

10

Gamma
Medium

5 Select the desired line/function with »V«
or »«, select the value/option with »<« or »>«.
Note: 7 Other settings are available under
»Advanced Video«.
6 Select »Device Preferences« with »V« and
confirm with »«.

7 Select the desired line/function with »V« or
»« and confirm with »«.
Select the value/option with »<« or »>«
and confirm with »«.
8 Press » r « to return to the previous menu or press »p« to return to Home menu.
Enhanced picture settings
The “enhanced picture settings” are in principal digital image improvements which, however, should be only used when necessary when picture quality and transmission is excellent. They may well improve the display with poor material, but may adversely affect the display where transmission and picture quality are excellent.
7 »Gamma« ­ This setting determines which brightness value should be displayed for which digital transmission value. Most recordings are transmitted with a gamma value of 2.2 (all Windows PCs and newer PCs with a MAC operating system work with this; older MAC systems and transmissions without a colour profile mostly operate with a gamma value of 1.8).
7 »Colour Management System« – This function allows the brightness, contrast and tone of the colours to be adjusted separately. It is possible to adjust these settings separately for red, green, blue, magenta, black and yellow colours. With this function, advanced settings can be made in very specific contents
7 »11 Point White Balance Correction «- This function makes precise colour temperature adjustment in different shades of gray. When content containing shades of gray is played on the screen, the red-greenblue components of the gray tones can be precisely adjusted separately with this function.
7 »Noise Reduction« ­ Reduces the visible “snow” by displaying the picture a little less sharply and creating a slight blurring. Thus, it must be used as little as possible with good picture material.

26 ENGLISH

PICTURE / SOUND SETTINGS———————————-

7 »Digital Noise Reduction« ­ This function can only be selected with digital receiver sources and AV pre-sets. It reduces any interference from artefacts (pixel blocks) from
digital programmes due to MPEG compression (such as from DVB-T receivers and lower transmission rates or DVD players).
7 »Dynamic Contrast« ­ The function dynamically and optimally adjusts the contrast for the respective picture content by analysing images and then altering this depending in a change in contrast. This increase in the contrast however, may also reduce the visible brightness levels in the picture.
7 »Micro Dimming« ­ Increases the level of detail in dark images. The television divides the screen into small sections and analyses each section individually to determine the best brightness value. This ensures that more detailed pictures are obtained in dark contents.
7 »Film mode« detects and processes feature films automatically for all channel sources. This means you will always receive an optimal picture. This functions in the modi 480i, 576i and 1080i in TV playback and for other channel sources. The »Film Mode« will be enabled for programmes that do not have a feature film signal, and insignificant problems may be observed such as dull pictures, incorrect subtitles or fine lines on the picture.

Restoring factory defaults for picture settings 1 To reset the changes made in the
»Picture« menu, press »V« to select
»Reset to Default« and confirm with »«.
2 Select »YES« with »<« or »>« to confirm the
deletion and press »«;
or
select »NO« and press »« to cancel it.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.

ENGLISH 27

PICTURE / SOUND SETTINGS———————————-

Sound settings
1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Device Preferences« with »V« and
confirm with »«.
4 Select »Sound« with »V« and confirm with
»«.
­ »Sound« menu shall be displayed.

Sound

System sounds

Dolby Audio Processing

Sound Style
Standard

Balance

0

Bass

50

Treble

50

Surround Sound

Equalizer Details

Speakers
Note: 7 Additional procedures are explained in the
following sections.

System Sounds You can turn system sounds on or off. 1 Select the line »System Sounds« with »V«
or »« and select the position »On« or
»Off« with »«. 2 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Dolby Audio Processing 1 Select the line »Dolby Audio Processing«
from the audio menu with »V« and confirm
with »«.
­ The »Dolby Audio Processing« menu shall be displayed.
2 Confirm »Dolby Audio Processing« with
»«.
­ Dolby Audio Processing is enabled.
3 Select the line »Sound Mode« with »V«
and confirm with »«.
4 Select »Game«, »Movie«, »Music«, »News«, »Stadium«, »Standard« or »User« sound mode with »V« or »« and confirm
with »«.
5 Select »Volume Adjuster« with »V« and
select »On« or »Off« with »«.
6 Select the line »Dialogue Development«
with »V« and confirm with »«.
7 Select »Off«, »Low«, »Medium« or »High«
with »V« or »« and confirm with »«.
8 Press » r « to return to the previous menu or press »p« to return to Home menu.
Sound Mode Note: 7 The »Sound Style« is active in the menu when the »Dolby Audio Processing« feature is selected as off.
1 Select the line »Sound Style« from the sound menu with »V« or »« and confirm with
»«.
2 Select »Standard«, »Music«, »Film«, »Sport« or »User« with »V« or »« and confirm
with »«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.

28 ENGLISH

PICTURE / SOUND SETTINGS———————————-

Balance Note: 7 The »Balance« is active in the menu when the »Dolby Audio Processing« feature is selected as off.
1 Select the line »Balance« from the sound menu with »V« or »«.
2 Select the value with »<« or »>«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
Bass Note: 7 The »Bass« is active in the menu when the »Dolby Audio Processing« feature is selected as off.
1 Select the line »Bass« from the sound menu with »V« or »«.
2 Select the value with »<« or »>«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
Treble Note: 7 The »Treble« is active in the menu when the »Dolby Audio Processing« feature is selected as off.
1 Select the line »Treble« from the sound menu with »V« or »«.
2 Select the value with »<« or »>«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
Surround sound Note: 7 The »Surround Sound« is active in the menu when the »Dolby Audio Processing« feature is selected as off.
1 Select »Surround Sound« with »V« or »« and select the position »On« or »Off« with
»«. 2 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Equalizer Details Equalizer offers a sound setting that you can create.
Note: 7 The »Equalizer« is active in the menu when
the »Dolby Audio Processing« feature is selected as off.
1 Select the line »Equalizer Details« from the sound menu with »V« or »« and confirm
with »«.
­ »Equalizer Details« menu shall be displayed.
2 »120Hz« frequency band shall be displayed.
Press »<« or »>« to set the preferred value.
3 Select the next frequency band with »V« or »« to repeat the adjustment procedure.
4 Press » r « to return to the previous menu or press »p« to return to Home menu.
Speakers 1 Select the line »Speaker« from the sound
menu with »V« or »« and confirm with
»«.
2 Select »TV Speakers« or »External Sound System« with »V« or »« and confirm with
»«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
Digital input 1 Select the line »Digital Input« from the sound
menu with »V« or »« and confirm with
»«.
2 Select »Auto«, »Direct Switch«, »PCM«, »Dolby Digital Plus« or »Dolby Digital« with
»V« or »« and confirm with »«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
ENGLISH 29

PICTURE / SOUND SETTINGS———————————-

SPDIF Delay 1 Select the line »SPDIF Delay« from the
sound menu with »V« or »«.
2 Select the value with »<« or »>«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
Auto volume Television channels broadcast at different volumes. Automatic Volume Control function means the volume is kept the same when you switch between channels.
Note: 7 The »Automatic Volume Control« is active
in the menu when the »Dolby Audio Processing« feature is selected as off.
1 From the sound menu, select the line »Automatic Volume Control« with »V« or
»« and select »On« or »Off« with »«.
2 Select the line »AVL« with »V« or »« and
select »On« with »«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.
Downmix Mode 1 Press »V« or »« to select »Downmix
Mode« and press »« to confirm.
2 Use »V« or »« to select »Stereo« or
»Surround« and confirm with the »«.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.

DTS DRC Adjusts the range between loudest and quietest. 1 Select »DTS DRC« with »V« or »« and
select the position »On« or »Off« with »«.
2 Press » r « to return to the previous menu or press »p« to return to Home menu.
Restoring factory defaults for sound settings 1 To reset the changes made in the »Sound«
menu, press »V« to select »Reset to Default«
and confirm with »«.
2 Select »YES« with »<« or »>« to confirm the
deletion and press »«;
or
select »NO« and press »« to cancel it.
3 Press » r « to return to the previous menu or press »p« to return to Home menu.

30 ENGLISH

FUNCTIONING OF THE TV – BASIC FUNCTIONS–

Switching on and off 1 Press »8« to switch on the television in
standby mode.
2 Press »8« to switch the television to standby.
Selecting the TV mode
1 From the »Home« menu »Applications« tab,
select the »TV« application with »<« or »>«
and confirm with »«.
­ TV mode shall be displayed on the last selected antenna source.
Selecting a signal source 1 Press » s «, select the signal source with
»V« or »« and confirm with »«.
or
Press »q« in the TV application, confirm »Source« with »«, select the signal source with »V« or »« and confirm with »«
or
Select » s Inputs« in the »Home« menu
with »<«, »>«, »V« or »« and confirm
with »«. Use »V« or »« to select signal source and confirm with the »«.
Selecting the antenna type in TV mode 1 Press »q« in the TV mode.
2 Select »Settings« with »>« and confirm with
»«.
3 Select »Channel« with »V« and confirm
with »«.
4 Select »Channel Set-up Mode« with »V«
and confirm with »«.
5 Use »V« or »« to select antenna type
and confirm with the »«. 6 Press » r « twice to return to broadcast.

Selecting channels
1 Use »1…0« to select channels directly.
or
Use »P« or »PV« to select channels step by step;
or
In TV mode, press »« In the »Channel
List – Broadcast« menu, select a channel with
»V« or »« and confirm with »«.
Adjusting the volume
1 Adjust the volume with »P ­« or »P +«.
Muting
1 Use » N « to switch the sound off (mute) and to switch it on again.

ENGLISH 31

FUNCTIONING OF THE TV – ADDITIONAL FUNCTIONS—-

Picture mode 1 Press »q« in the TV mode.
2 Select the »Picture Mode« with »<« or »>«
and confirm with »«.
3 Select the picture mode with »V« or »«
and confirm with »«. 4 Press » r « to return to the broadcast.
Changing the picture format 1 Press »q« in the TV mode.
2 Select the »Picture Mode« with »<« or »>«
and confirm with »«.
­ Picture Mode menu shall be displayed..
3 Select the picture mode with »V« or »«
and confirm with »«.
Notes: 7You can select one of the following picture
formats.
»Auto« format The picture format is automatically switched to »16:9« for 16:9 programmes. The picture format is automatically switched to »4:3« for 4:3 programmes.
»Super Zoom« format This setting is suited to films with a large width/ height ratio.
»4:3« format The picture is shown in 4:3 format.
»Movie expand 14:9« and »Movie expand 16:9« formats During programmes in 4:3 format, the picture is stretched horizontally if »16:9« or »14:9« is selected. The picture geometry is stretched horizontally. With actual 16:9 signal sources (from a satellite receiver or the Euro-AV socket) the picture fills the screen completely and with the correct geometry.

»Widescreen« format Wide Screen setting is especially suitable for programmes in 16:9 format.
The black borders which are usually at the top and bottom of the screen are removed, 4:3 picture fills the screen.
The transmitted pictures are enlarged, but are slightly cropped at the top and bottom. The picture geometry remains unchanged
»Full Screen« format When this mode is selected, the high resolution picture from the HDMI and Component inputs is not cropped and it is displayed in its original size. This mode is only enabled in the HDMI mode and for resolutions at or above 720p.
»Unscaled« format Unscaled format displays pictures in their original size.
Speakers 1 Press »q« in the TV mode.
2 Select the »Speakers« with »<« or »>« and
confirm with »«.
­ Speakers menu shall be displayed.
3 Select audio output with »V« or »« and
press »« to confirm.

32 ENGLISH

FUNCTIONING OF THE TV – ADDITIONAL FUNCTIONS—-

Power Settings
Sleep timer In the »Sleep Timer« menu you can enter a time for the television to switch off. After this time has elapsed, the TV will switch to standby mode.
1 Press »q« in the TV mode.
2 Select the »Power« with »<« or »>« and
confirm with »«.
­ Power menu shall be displayed.
3 Use »V« or »« to select »Sleep Timer«
and confirm with »«.
4 Select the off time with »V« or »« and
confirm with »«. 5 Press » r « to return to the broadcast.
Picture off You can only turn picture off without taking the TV to stand-by mode.
1 Press »q« in the TV mode.
2 Select the »Power« with »<« or »>« and
confirm with »«.
­ Power menu shall be displayed.
3 Use »V« or »« to select »Picture Off« and
confirm with »«.
­ Television picture shall be turned off.
4 Press any key on the remote control to turn the picture back on.
5 Press » r « to exit the menu.

Auto off timer
1 Press »q« in the TV mode.
2 Select the »Power« with »<« or »>« and
confirm with »«.
­ Power menu shall be displayed.
3 Use »V« or »« to select »Timer Off« and
confirm with »«.
4 Select the off time with »V« or »« and
confirm with »«.
5 Press » r « to return to the broadcast.
Automatic shut down when no signal Select the time when the TV will switch off automatically if it does not receive any broadcast signals.
1 Press »q« in the TV mode.
2 Select the »Power« with »<« or »>« and
confirm with »«.
­ Power menu shall be displayed.
3 Use »V« or »« to select »Automatic Shut Down When No Signal« and confirm with
»«.
4 Select the off time with »V« or »« and
confirm with »«.
5 Press » r « to return to the broadcast.

ENGLISH 33

FUNCTIONING OF THE TV – ADVANCED

FUNCTIONS —————————————————————

You can adjust the advanced settings of the TV in the »Advanced Options« menu.
1 Press »q« in the TV mode.
2 Select the »Advanced Options« with »<« or »>« and confirm with »«.
­ »Advanced Options« menu shall be displayed.

Blue Screen
You can select the screen color blue when there is no TV broadcast signal.
1 Press »V« or »« to select »Silent Blue Screen« from the »Advanced Options« menu.
2 Select the position »On« or »Off« with »«.

Advanced Options
Sound
Audio language
Set-up
Silent Blue Screen Default Channel Interaction Channel MHEG PIN Protection HBBTV Settings

3 Press » r « to return to the broadcast.
Default Channel
Select the default channel that the TV will turn on. 1 Select »Default Channel« from the
»Advanced Options« menu with »V« or
»« and confirm with »«. 2 Confirm »Select Mode« with »«.
3 Select »End Status« or »User Choice« with »V« or »«.
4 Press » r « to return to the broadcast.
Interaction Channel
Turn the interaction channel feature on or off.

Subtitle
Teletext
Note: 7 Additional procedures are explained in the
following sections.

1 Press »V« or »« to select »Interaction Channel« from the »Advanced Options« menu.
2 Select the position »On« or »Off« with »«. 3 Press » r « to return to the broadcast.
MHEG PIN Protection

Audio language
You can select various languages when watching digital channels. This depends on the programme being broadcast.
1 Select »Audio Language« from the »Advanced Options« menu with »V« or
»« and confirm with »«.
2 Press »V« or »« to select supported
audio language and press »« to confirm.

Enable PIN protection on interactive MHEG applications.
1 Press »V« or »« to select »MHEG PIN Protection« from the »Advanced Options« menu.
2 Select the position »On« or »Off« with »«.
3 Press » r « to return to the broadcast.

3 Press » r « to return to the broadcast.

34 ENGLISH

FUNCTIONING OF THE TV – ADVANCED

FUNCTIONS —————————————————————

Subtitles
1 Select »Subtitle« from the »Advanced Options« menu with »V« or »« and
confirm with »«.
­ »Subtitle« menu shall be displayed.
Note: 7 In TV mode, you can open the »Subtitle«
menu by pressing »SUB«.

Second Digital Subtitle Language 1 Select »Second Digital Subtitle Language«
from the »Subtitle« menu with »V« or »«
and confirm with »«.
2 Press »V« or »« to select the second
digital subtitle language and press »« to
confirm.
3 Press » r « to return to the broadcast.

Analog Subtitle 1 Select »Analog Subtitle« from the »Subtitle«
menu with »V« or »« and confirm with
»«.
2 Press »V« or »« to select »On«, »Off« or
»Mute« and confirm with »«.
Important: 7 If the »mute« option is selected, analog
subtitle is displayed on the screen, but no sound shall come from the speakers.
3 Press » r « to return to the broadcast.
Digital Subtitle 1 Select »Digital Subtitle« from the »Subtitle«
menu with »V« or »« and confirm with
»«.
2 Press »V« or »« to select »On« or »Off«
and confirm with »«. 3 Press » r « to return to the broadcast.
Digital Subtitle Language 1 Select »Digital Subtitle Language« from
the »Subtitle« menu with »V« or »« and
confirm with »«.
2 Press »V« or »« to select the digital
subtitle language and press »« to confirm. 3 Press » r « to return to the broadcast.

Subtitle Type 1 Select »Subtitle Type« from the »Subtitle«
menu with »V« or »« and confirm with
»«.
2 Press »V« or »« to select »Normal« or »Hearing Impaired Option« and confirm
with »«.
Note: 7 If the »Hearing Impaired« option is
selected, subtitle services are provided with annotations.
3 Press » r « to return to the broadcast.
Teletext language selection
1 Select »Teletext« from the »Advanced Options« menu with »V« or »« and
confirm with »«.
­ »Teletext« menu shall be displayed.
Digital Teletext Language 1 Select »Digital Teletext Language« from
the »Teletext« menu with »V« or »« and
confirm with »«.
2 Press »V« or »« to select the digital
teletext language and press »« to
confirm.
3 Press » r « twice to return to broadcast.
Page Decoding Language 1 Select »Page Decoding Language« from
the »Teletext« menu with »V« or »« and
confirm with »«.
2 Press »V« or »« to select the page
decoding language and press »« to
confirm.
3 Press » r « twice to return to broadcast.
ENGLISH 35

FUNCTIONING OF THE TV – ADVANCED

FUNCTIONS —————————————————————

BISS Key
Biss key is an encryption technique. You can watch a frequency encrypted with the Biss key by entering the Biss key.
Note: 7 The BISS Key item is displayed in the menu
only when the broadcast source is selected as Satellite.
1 Select »BISS Key« from the »Advanced Options« menu with »V« or »« and
confirm with »«.
2 Use »V« or »« to select »Frequency« and
confirm with »«.
3 Enter the frequency at which you will enter
the biss key with the »1…0«, select the »«
on the virtual keyboard and confirm with
»«.
4 Use »V« or »« to select »Symbol Rate
(Ksym/s)« and confirm with »«.
5 Enter the frequency symbol rate for which you will enter the biss key with the »1…0«,
select the »« on the virtual keyboard and confirm with »«.

12 Use »V« or »« to select »Save Key« and
confirm with »«.
Note: 7 The BISS Key can be entered for more than
one frequency. Repeat steps 2 to 12 to add Biss keys to different frequencies.
13 Press » r « to return to the broadcast.
Automatic shut down
This function will switch the television to standby mode in 4 hours according to European regulations, if no key on the keypad of the TV or the remote control is not pressed.
1 Select »Automatic Shut Down« from the »Advanced Options« menu with »V« or
»« and confirm with »«.
2 Select »Never«, »4 hours«, »6 hours« or »8 hours« with »V« or »« and confirm with
»«.
3 Press » r « to return to the broadcast.

6 Use »V« or »« to select »Polarization«
and confirm with »«.

7 Select the polarization of the frequency for which you will enter the biss switch with
»V« or »« and confirm with »«.

8 Use »V« or »« to select »Program ID«
and confirm with »«.

9 Enter the frequency program id for which you will enter the biss key with the »1…0«,
select the »« on the virtual keyboard and confirm with »«.

10 Use »V« or »« to select »CW Key« and
confirm with »«.

11 Enter the biss key with the »1…0«, select the
»« on the virtual keyboard and confirm with »«.

36 ENGLISH

FUNCTIONING OF THE TV – ADVANCED FUNCTIONS —————————————————————

TKGS Settings
Note: 7 TKGS Settings is displayed in the menu only
when the broadcast source is selected as Satellite.
1 Select »TKGS« from the »Advanced Options« menu with »V« or »« and
confirm with »«.
­ »TKGS Setting« menu shall be displayed.
Operation mode 1 Select »Operation Mode« from the »TKGS
Setting« menu with »V« or »« and
confirm with »«.
2 Press »V« or »« to select »Auto«, »Flexible« or »TKGS Off« and confirm with
»«.
Note: 7 If the TKGS mode of operation is »Auto«,
»Change Channel Location«, »Move Channel« and »Edit Channel« are not active. Select »Flexible« or »TKGS Off« to edit the channels.
3 Press » r « twice to return to broadcast.

TKGS Location List 1 Select »TKGS Location List« from the »TKGS
Setting« menu with »V« or »« and
confirm with »«. 2 Confirm »Click to Add Location« with »«.
3 Use »V« or »« to select »Frequency« and
confirm with »«.
4 Enter the channel location list frequency
with »1…0«, select the »« on the virtual keyboard and confirm with »«.
5 Use »V« or »« to select »Symbol Rate
(Ksym/s)« and confirm with »«.
6 Enter the channel location list frequency
symbol rate with »1…0«, select the »« on the virtual keyboard and confirm with »«.
7 Use »V« or »« to select »Polarization«
and confirm with »«.
8 Use »V« or »« to select polarization and
confirm with »«.
9 Use »V« or »« to select »Program ID«
and confirm with »«.
10 Enter the channel location list frequency
program id with »1…0«, select the »« on the virtual keyboard and confirm with »«.
11 Use »V« or »« to select »Save Location«
and confirm with »«.
Note: 7 TKGS location list can be entered for more
than one frequency. Repeat steps 2 to 11 to add to different frequencies.
12 Press » r « twice to return to broadcast.

ENGLISH 37

FUNCTIONING OF THE TV – ADVANCED FUNCTIONS —————————————————————
Reset Tabel Version 1 Select »Reset Table Version« from the
»TKGS Setting« menu with »V« or »« and
confirm with »«.
­ A warning message shall be displayed. 2 Select »OK« to confirm the reset;
or
»Cancel« to cancel and press »« to
confirm.
3 Press » r « to return to the broadcast.
Preferred List 1 Select »Preferred List« from the »TKGS
Setting« menu with »V« or »« and
confirm with »«.
2 Press »V« or »« to select »HD« or »SD«
and confirm with »«. 3 Press » r « to return to the broadcast.
Signal information
1 Select »System Information« from the »Advanced Options« menu with »V« or
»« and confirm with »«.
­ »System information« shall be displayed. Notes: 7 Signal information changes depending on
the current source. 7 The signal level not only depends on your
receiver system, but also on the channel which is currently active. Remember this when aligning your antenna using the signal level display.
2 Press » r « to return to the broadcast.
Version information
1 Select »Version Information« from the »Advanced Options« menu with »V« or
»« and confirm with »«.
­ »Version Information« shall be displayed.
2 Press » r « to return to the broadcast.
38 ENGLISH

ELECTRONIC TV GUIDE———————————————
The electronic programme guide offers an overview of all programmes that will be broadcast in the next week (for digital stations only).
1 Press »q« to start the electronic TV guide
in TV mode. 2 Select the Channels tab with »«.
3 Select the »Program Guide« with »<« and
confirm with »«.
­ Electronic TV Guide shall be displayed. Notes: 7 Not all channels provide a detailed TV
guide. 7 Many broadcasters supply the daily
programme but no detailed descriptions. 7 There are broadcasters which do not
provide any information at all. 4 Select the channel with »V« or »«.
­ Information about the actual programme is displayed in the selected television channel.
5 Press »>« to select information on the next broadcasts and press »<« to return to the
information for the current broadcasts. 6 Press »« (red) to view the programs of the
previous day, press »« (green) to view the programs of the next day. 7 Press »« (yellow) to view detailed information on the program. 8 Press »« (blue) to filter the programs. Note: 7 See the instructions on the screen for additional options.
9 Press » r « to return to the broadcast.
ENGLISH 39

HBBTV MODE ————————————————————
What is HbbTV?
With its modern structure, content and high definition (HD) pictures and videos, HbbTV is a new technology where broadcast and the broadband can be used together and which permits access to interactive applications that the broadcast provides through internet. The TV must be connected to internet to receive HbbTV broadcast. When you switch to a TV channel that offers HbbTV service, the relevant message shall be displayed.
40 ENGLISH

HBBTV MODE ————————————————————

Using HbbTV
When you switch to a TV program that supports HbbTV, an info message will appear stating that HbbTV broadcast is available. 1 Press »« (red) to open HbbTV.
­ Information regarding the service will appear on the screen. Additionally, colored buttons necessary for browsing the menus will also appear.
Note: 7 The range of subjects and selection of
individual subjects are subject to the programme provider.
7 Numeric buttons between»1« and »0« are used for additional functions.
2 Press »« (green), »« (yellow) or »« (blue) to select the desired topic field.
3 Select the option you want with »V«, »«,
»<« or »>« in the selected topic field and
confirm with »«.
4 Press »« (red) to close HbbTV.
Note: 7 If navigation does not work in HbbTV
mode, press » r « to exit the function.
Additional functions for video indexes 1 Press » w « to start playback.
2 Press » w « to pause playback.
3 Press » w « to resume playback.
4 Press » u « to rewind, press » v « to fast forward.
5 Press » w « for 5 seconds to stop playback.

HBBTV Settings
1 Select »HBBTV Settings« from the »Advanced Options« menu with »V« or
»« and confirm with »«.
­ »HBBTV Settings« menu shall be displayed.
1 Press »q« in the TV mode.
2 Select the »Advanced Options« with »<« or »>« and confirm with »«.
3 Use »V« or »« to select »HBBTV
Settings« and confirm with »«.
­ HBBTV Settings menu shall be displayed.
Note: 7 Additional procedures are explained in the
following sections.
HBBTV Support You can turn off HbbTV, by this way warnings for HbbTV are not displayed on channels broadcasting HbbTV. 1 Select »HBBTV Support« with »V« or »«
and select the position »On« or »Off« with
»«.
2 Press » r « to return to the previous menu.
Watch preference Set your watching preference for HbbTV services. 1 Select »Do Not Track« with »V« or »«
and confirm with »«.
2 Press »V« or »« to select »On«, »Off« or
»Default« and confirm with »«.
3 Press » r « to return to the previous menu.

ENGLISH 41

HBBTV MODE ————————————————————

Cookie Settings Set your cookie preference for HbbTV services. 1 Select »Cookie Settings« with »V« or »«
and confirm with »«.
2 Select »Block All«, »Block 3rd party cookies« or »Default« with »V« or »«
and confirm with »«. 3 Press » r « to return to the previous menu.
Permanent Storage Permanent storage on/off for HbbTV services. 1 Select »Permanent Storage« with »V« or
»« and select the position »On« or »Off«
with »«. 2 Press » r « to return to the previous menu.
Block TV Sites Block/allow TV sites. 1 Select »Block TV Sites« with »V« or »«
and select the position »On« or »Off« with
»«. 2 Press » r « to return to the previous menu.
Device ID Turn off/on device ID. 1 Select »Device ID« with »V« or »« and
select the position »On« or »Off« with »«. 2 Press » r « to return to the previous menu.

Reset Device ID 1 Use »V« or »« to select »Reset Device
ID« and confirm with »«. 2 Confirm »OK« with »« to confirm the
reset.
or
press » r « to cancel. 3 Press » r « to return to the previous menu.

42 ENGLISH

TELETEXT MODE ———————————————————

TOP text or FLOF text mode
1 Press »TXT« to switch to teletext mode.
2 You can select teletext pages directly with »1…0« or step by step with »V« or »«.
Note: 7 At the bottom of the screen, you will see an
information line consisting of a red, green and, depending on the station, yellow and blue text field. Your remote control has buttons with the corresponding colours. 3 Press »« (red) to go to the previous page. 4 Press »« (green) to select topic. 5 Press »« (yellow) to select partition. 6 Press »« (red) to go to the previous page.
7 Press »TXT« to exit teletext mode.
Normal text mode
1 Press »TXT« to switch to teletext mode.
2 You can select teletext pages directly with »1…0«.
3 Press »P-« to go to the previous page.
4 Press »P+« to go to the next page.
5 Press »TXT« to exit teletext mode.

Calling the subpage directly
If the selected teletext page contains further pages, the number of the current sub-pages as well as the total number of pages is displayed.
1 Press »<« or »>« to select a subpage.

ENGLISH 43

USB RECORDING ——————————————————

Information on recording and playing television programs
7 Recording and reproducing programmes, this can only be done with digital television stations (DVB-S, DVB-T and DVB-C).
7 The digital television stations (DVB-S, DVB-T and DVB-C) you are able to record and playback also depend on the broadcasting station.
7 Besides recording and playing programmes, the Timeshift function can only be carried out using an external data medium (hard drive or USB stick).
7 Recordings can be made with most data mediums on the market. However, we cannot guarantee operation for all data media.
7 Recording can only be done on USB memory sticks and hard disks with FAT and FAT32 format.
7 If you record a programme on an external data medium, you can only watch it on your television. You cannot watch this program on any other device.
7 If you send your television to be repaired and hardware components need to be replaced, you might not be able to play the recordings again on the repaired television.
7 Grundig isn’t responsible for any loss of data stored on any external storage device.
7 It is recommended to play the files saved on DTV by PVR media player.

Possible restrictions on using an external data medium
Depending on the broadcasting station, you may experience various restrictions on some functions from some television stations.
GRUNDIG has no influence on these restrictions.
7 Recording a programme on the external data medium can be disabled by the broadcaster. If »URI protected! PVR function is blocked« is displayed on the screen, then recording or time shift is restricted (one recording possible) or disabled (recording not possible) by the broadcaster. URI = user rights information.
7 If you record and save a programme on the archive of an external data medium, playback can be restricted. The broadcaster can allow you to see this programme one or more times but could also just make it available for a certain period of time.
7 Stations from which children are protected, immediately require a PIN number before recording starts. If this authorization is not given, the recording may not start.

44 ENGLISH

USB RECORDING ——————————————————

Connecting external data medium
Notes:
7 It is advised to put the television on stand-by mode before connecting the External Data medium.
7 Before disconnecting the external data medium, the television must first be switched to standby, otherwise files can be damaged.
7 There are two USB inputs on the television, USB2 (HDD) and USB1. A USB device that needs additional power (eg external hard disk) is connected to the USB2 (HDD).

Notes:
7 According to the USB standard, the USB1 socket of the TV supports a current of 500 mA. Devices such as external hard disk and etc. that consume more power can only be connected to the USB2 (HDD) USB interface of the television.
7 USB2 (HDD) If you are using a power cable for the external hard disk that you have connected to the USB interface, then the power cable of the external hard disk shall also be unplugged when the TV is turned off.
7 You must not disconnect the USB Device from the TV while a file on the USB Device is being read by the TV.

USB1

USB2 (HDD) 1A
1 Plug the external hard disk to the USB2 (HDD) USB interface of the television; or plug the memory stick in one of the USB1 sockets of the television.

ENGLISH 45

USB RECORDING ——————————————————

USB recording settings
1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Device Information« with »>« and
confirm with »«. ­ Device Information menu shall be displayed.

Device Information

USB 1

15,6/15,6 GB

NA

USB 2

256/256 GB PVR/TSHIFT 15,0MB/S

Enter Info

Exit Exit

Note:
7 Additional procedures are explained in the following sections.

Formatting external data medium Important: 7 Formatting external data medium causes all data in the data medium to be permanently deleted.
1 All external data media connected to TV are displayed in the device information menu. Select the external data medium you want to format with »V« or »« and confirm with »«.
2 Use »V« or »« to select »Format« and confirm with »«. ­ A warning message shall be displayed.
3 Select »Yes« to confirm formatting;
or
select »No« to cancel formatting and confirm with »«.
4 When the format is complete, the »Device Information« menu is displayed.

Selecting external data medium for Record/Time shift If more than one external data medium is connected to TV, you can set different data media for record/time shift or assign both records to one data medium.
1 All external data media connected to TV are displayed in the device information menu. Press »V« or »« to select external data medium and press »« to confirm.
2 Select »Set time shift« and/or »Set PVR« with »V« or »« and confirm with »«.
3 According to the selection you made for the disc in the »Device Information« menu, »TSHIFT« is displayed if only time shift is selected, »PVR« if only recording is selected, or »PVR/TSHIFT« if both recordings are selected on the same data medium.
Notes: 7 You can connect two different external data
media to the TV and select one separately as »PVR« recording and the other as »TSHIFT« recording.
7 Functions do not work if no external data medium is assigned for recording/time shift.
Testing external data medium You can test the external data media to see if it is suitable for the required functions.
1 All external data media connected to TV are displayed in the device information menu. Select the external data medium for which you want speed testing with »V« or »« and confirm with »«.
2 Use »V« or »« to select »Speed Test« and confirm with »«.
3 After a short time the speed test result of the external data medium is displayed on the screen.
4 Confirm »Exit« with »« to exit the Speed Test menu.

46 ENGLISH

USB RECORDING ——————————————————

Enabling and disabling the time shift function
You can turn time shift off or on with this feature.
1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Time Shift Mode« with »>« and
confirm with »«. ­ The Time Shift Mode menu shall be
displayed.
4 Select »On« or »Off« with »« in »Time
Shift Mode«.
5 Press » r « to return to the previous menu.
Time shift disc set-up
If you are going to connect an external data medium to TV for the first time and use it for time shift, a disc set-up is required.
Automatic disc set-up 1 Connect the external data medium to the
USB input of TV.
2 Press » w «. ­ Disc Set-up menu shall be displayed.
3 Select »Auto« and press »« to confirm. ­ The external data medium is automatically configured and the message »Disc Set-up Complete« is displayed.
Notes: 7 This should be done when an external data
medium is first connected to TV or when the external data medium is formatted by TV.
7 An external disc larger than 4 GB is required for this operation.
7 Auto set-up creates 4GB time shift space on discs below 32GB and 16GB on discs above 32GB.
4 Press » r « to return to the broadcast.

Manual disc set-up 1 Connect the external data medium to the
USB input of TV.
2 Press » w «. ­ Disc Set-up menu shall be displayed.
3 Select »Manual« with »V« and confirm with »«.
4 Select »Format« to format the external data medium;
or
to continue without formatting, select »Skip« and confirm with »«.
Important: 7 It is recommended to format the external
data medium for better performance. This action will delete all data on the external data medium.
5 The formatting warning message shall be displayed. Select »Format« and confirm with »«. ­ Formatting progress shall be displayed on the screen.
6 When formatting is complete, select the size you want to reserve for time shifting according to the size of the external data medium with »V« or »« and confirm with »«. ­ The external data medium is manually configured and the message »Disc Set-up Complete« is displayed.
7 Press » r « to return to the broadcast.

ENGLISH 47

USB RECORDING ——————————————————

“Pausing” time shift and continuous recording programs
You can pause any programme you are watching. For instance, if the phone rings when you are watching a movie, you can pause the movie and resume it after the call without missing nothing.
The last scene that was frozen is displayed and time shift is recorded into the external data media.
With the continuous recording feature, TV records the channel you are currently watching as much as the time shift memory you create on external data media. Thus, you can use the rewind feature on the channel you are watching.
Note:
7 Use an external USB Hard Disk for an uninterrupted “Permanent Time Shift”.
1 Press » w « during the broadcast. ­ Television picture is paused and delay time is displayed.
2 To resume the broadcast, press » w «. ­ The system continues recording the broadcast while you are watching it.
Note:
7The following functions can be used in the time shift mode. ­ Fast rewind, press » u « several times for the desired speed; ­ Fast forward, press » v « several times for the desired speed; ­ To pause, press » w «.
3 To stop time shift, press and hold » w « for 5 seconds.

Recording Programs
You can record a TV channel. Programmes are recorded onto the external data media and the archive is managed via television.
A memory of 44 MB up to 110 MB is required for a 1 minute record.
1 Select the channel with »1…0« or »P «, »P V« to start recording.
2 Press »q« in the TV mode.
3 Select »Save« tab with »V«.
4 Confirm »Start Recording« with »«. ­ Recording information shall be displayed: Recording symbol, channel name, programme time and recording time. ­ This information will disappear after a short while, the »REC« symbol and the recording time appear in the lower left corner of the screen.
5 To stop recording, press and hold » w « for 5 seconds.
Notes: 7 When recording is complete, it will
automatically be stored on the external data media.
7 If you remove the external data media during recording, then the recording is cancelled automatically and no data is recorded onto the external data media.
Switching the TV to stand-by during recording 1 Select the channel with »1…0« or »P «,
»P V« to start recording.
2 Press »q« in the TV mode.
3 Select the »Record« tab with »V« and confirm »Start Recording« with »«.
4 To switch the TV to stand-by, press »8«.

48 ENGLISH

USB RECORDING ——————————————————

Recording a programme from the channel list 1 Press »« to open the channel list.
2 Select a channel with »V« or »« and press»« to confirm.
3 Press »q«.
4 Select »Save« tab with »V«.
5 Confirm »Start Recording« with »«. ­ Recording information shall be displayed: Recording symbol, channel name, programme time and recording time. ­ This information will disappear after a short while, the »REC« symbol and the recording time appear in the lower left corner of the screen.
6 To stop recording, press and hold » w « for 5 seconds.
Adding recording timer 1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Program List« with »>« and confirm
with »«. ­ Program list menu shall be displayed. If
there are preset recording timers, they shall be displayed.
4 To add a new recording timer select »PVR«
with »V«, »«, »<« or »>« and confirm
with »«.
5 In »Source« line, press »<« or »>« to select the source to be recorded.
6 In »Channel Information« line, press »<« or »>« to select the channel to be recorded.
7 In »Event Model« line, select »Timing Program« or »Signal-assisted Recording«
with »<« or »>«.
8 Enter year, month and day information in »Start Date« line with »1…0«.
9 Enter hour, minute and second information in »Start Time« line with »1…0«.

10 Enter hour, minute and second information in »Stop Time« line with »1…0«.
11 Select »Save« in the »Program Type« line
with »<« or »>«.
12 Select »Repeat Type« and press »«. Press »V« or »« to select (»Once«, »Daily« or »Weekly«).
13 To save the settings, select »Add« with »V«,
»«, »<« or »>« and confirm with »«.
14 Press » r « to return to the broadcast.
Notes:
7 A warning is displayed before the timer recording starts and counts down for 15 seconds to allow you to switch to the channel. At the end of 15 seconds, the channel to be recorded appears automatically.
7 If the timer recording starts during playback, playback stops. If you do not select »Yes« in the warning prompt, recording will start automatically at the end of the countdown.
7 Note specific to UPC customers: Parts of previous or next files can be included into the record while the programme is being recorded resulting from possible Programme Guide errors. In such cases, keep in mind that the highest family protection level will apply for the whole recording if one or more of those programmes have any level of family protection.

ENGLISH 49

USB RECORDING ——————————————————

Editing recording timer
You can delete programmed timers.
1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Program List« with »>« and confirm
with »«. ­ The scheduled recording timers shall be
displayed.
4 Select the recording timer you want to edit with »V« or »« and confirm with »«.
5 Use »<« or »>« to select »Edit« and confirm
with »«.
6 Edit recording timer.
7 To save the changes, select »Change« and confirm with »«.
8 Select »Yes« with »<« or »>« to save the changes;
or
To cancel the change, select »No« with »<« or »>« and confirm with »«.

Deleting a recording timer
You can delete programmed timers.
1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Program List« with »>« and confirm
with »«. ­ The scheduled recording timers shall be
displayed.
4 Select the recording timer you want to delete with »V« or »« and confirm with »«.
5 Use »<« or »>« to select »Delete« and
confirm with »«.
6 Select »Yes« with »<« or »>« to delete the timer;
or
To cancel the deletion, select »No« with »<« or »>« and confirm with »«.

50 ENGLISH

USB RECORDING ——————————————————

Playing
Either started manually or with the timer function, the recorded programs are all stored in the external data media. You can display the archive on the external data media from the »Recorded files list« menu.
Selecting a broadcast from the recorded files list
1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Recorded Files List« with »>« and
confirm with »«. ­ Recorded Files List shall be displayed.
4 Press »V« or »« to select the broadcast you want to play and press »« to start playing.
5 To stop playing, press and hold » w « for 5 seconds.
Forward/reverse picture search 1 Press »v « repeatedly during playback to
select the playback speed (2x, 4x, 8x, 16x, or 32x).
or
press » u « repeatedly to select the playback speed (2x, 4x, 8x, 16x or 32x).

Deleting broadcasts from the recorded files menu
You can delete recorded broadcasts from the Recorded Files list.
1 Press »q« in the TV mode.
2 Select »Save« tab with »V«.
3 Select »Recorded Files List« with »>« and
confirm with »«. ­ Recorded Files List shall be displayed.
4 Select the recording you want to delete with »V« or »« and press »« (yellow).
5 To confirm deletion, press »<« or »>« to select »Yes«;
or
to cancel deletion, press »<« or »>« to
select »No«.
6 Press » r « to return to the broadcast.

ENGLISH 51

USB PROCESS ————————————————————

File formats
Your television can be operated via the USB input with the following file formats:
Video data
Video compression / decompression (codec) is intended for decreasing the storage area without sacrificing the picture quality. Your TV allows you to play compressed video data with XVID, H.264/MPEG-4 AVC (L4.1, Ref. Frames:4), MPEG-4, MPEG-2, MPEG-1, MJPEG, MOV standards.
File extensions supported by the device: “.Avi”, “mkv”, “.mp4”, “.ts”, “.mov”, “.mpg”, “.dat”, “.vob”,”.divx”. In addition to video data, these files also contain audio data compressed and “packaged” by using MP3, AAC or Dolby Digital.
Format (codec) information is embedded within the file content and may differ depending on the file extension. “.avi”, “.mkv” or “.divx” files containing divx codec within are not played back.

Audio data
Your television can play audio data coded with MP3, AAC standards. MP3 indicates MPEG-1 Volume Level 3 and is based on the MPEG-1 standard that was developed by MPEG (Motion Picture Expert Group). AAC indicates the Advanced Audio Coding and is developed by MPEG. AAC provides higher audio quality with the same data rate (bit rate). WMA (Windows Media Audio) is a compression standard developed by Microsoft for audio data. These formats enable audio files to be saved on storage devices with a sound quality similar to that of a CD. File extensions supported by the device: “.mp3”, “.mp2”, “.wma”, “.m4a”, “.aac”, “.wav” MP3 files can be organized into folders and sub-folders similar to the files on a computer.
Picture data
Your television can display picture data in JPEG, PNG and BMP formats. JPEG stands for Joint Picture Experts Group. This process is intended to compress picture files. PNG and BMP are designed to compress picture data without any losses. Picture files can be saved onto a data medium along with other file types. Such files can be organised as folders and subfolders.

See http://patents.dts.com for DTS patents Manufactured under license from DTS Licensing Limited. DTS, The Symbol, the accompanying DTS and Symbol and DTS-HD are trademarks or registered trademarks of DTS, Inc. in the United States of America and in other countries. © DTS, Inc. All rights reserved.
52 ENGLISH

USB PROCESS ————————————————————

Connecting external data medium
It is advised to put the television on stand-by mode before connecting the External Data medium. Connect the device and then switch the television on again.
Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged.
Notes: 7 According to the USB standard, the USB1
socket of the TV supports a current of 500 mA. Devices such as external hard disk and etc. that consume more power can only be connected to the USB2 (HDD) interface of the television.
7 USB2 (HDD) If you are using a power cable for the external hard disk that you have connected to the USB interface, then the power cable of the external hard disk shall also be unplugged when the TV is turned off.
7 You must not disconnect the USB Device from the TV while a file on the USB Device is being read by the TV.
7 A duplex data transfer as defined for ITE (Information Technology Equipment) devices in EN 55022/EN 55024 is not possible
7 USB transfer is not an operating mode in itself. It is only an additional function.

USB2 (HDD) 1A
1 Connect the USB2 (HDD) interface of the television and the corresponding socket on the data device (external hard drive, digital camera, card reader or MP3 player) using a USB cable; or plug the memory stick in one of the »USB1« sockets of the television.
Removing the external data medium
Disconnect data medium before removing it.
1 Press »p«.
2 Use »V«, »«, »<« or »>« to select
»Settings« and confirm with the »«.
3 Select »Device Preferences« with »V« and
confirm with »«.
4 Select »Storage« with »V« and confirm with
»«.
5 Select the external data medium you want to remove with »V« or »« and confirm
with »«. 6 Confirm »Remove« with »«.
­ The message »….. safely removed« is displayed.
7 Remove the data medium from the socket.

USB1

ENGLISH 53

USB PROCESS ————————————————————

Multi Media Player menu
Multi Media Player file browser shows video, audio, picture and text data on external data medium.
If an external data medium contains different file formats, you can disable data (Video file, Audio file, Picture file or Text file) that you do not need to play/display with the file format selection, so that you can only play files in the format you want to view.

1 Press »p«.
2 In the »Applications« tab, select the »MMP«
application with »<« or »>« and confirm
with »«.
­ Multi Media Player« file format selection shall displayed.
3 Select the file format you want to play with
»<« or »>« by selecting »Video«, »Photo«,
»Music« or »Text« and confirm with »«.
­ File browser menu for the file format you selected shall be displayed.

1 File browser 2 Data type. 3 Data medium
folders. 4 Data medium files 5 Options.

Video
2

/storage/969c-c854

Folder Folder Folder

File

File

File

File

3

4

1
Play basic functions
1 Select the file you want to play from the file
browser with »<«, »>«, »V« or »« and
confirm with »«. 2 Press » w « to pause playback. 3 Press » w « to resume playback. 4 Press » r « to end playback.
­ The file browser appears.

5

OK Enter

exit Exit

Browse Mode

Notes:
7 It is possible that some files that are supported in USB mode do not operate due to some problems that may arise depending on how such files are created (compression) although they have the supported file extension.
7 If there are more then one audio source (audio stream) in the video files that are being played, then you can switch between the audio sources with »SUB« while the file is being played in full screen mode.
7 Movies you will be watching from a movie file only support subtitles with .srt, .sub, .ass, .ssa, .smi format. Names of the subtitle and movie files must be the same. Otherwise, subtitle can not be displayed.

54 ENGLISH

USB PROCESS ————————————————————

Additional playback functions
Depending on the file formats used, it is possible to use the following additional functions.
View information in all file formats
1 Press »q« during playback. 2 Select »Show information« and press »«
to confirm. ­ File information shall be displayed.
3 Press » r « to exit the menu.
Moving to the desired time (only video and audio files) You can select different speeds (2-fold, 4-fold, 8-fold, 16-fold and 32-fold forwards and backwards). 1 Press » u « or »v « to jump to the desired
time during playback.
Moving to a specific part of a video
1 Press »q« during playback.
2 Use »V« or »« to select »Search« and
confirm with »«.
3 Enter the time that you want to move to with
»1…0« and confirm with »«.
Repeat function (only video and audio files)
1 Press »q« during playback.
2 Use »V« or »« to select »Repeat« and
confirm with »«.
3 Press »V« or »« to select »None«, »Repeat One« or »Repeat All« and confirm
with »«.

Picture settings in video files You can change the display settings while playing video files.
1 Press »q« during playback.
2 Select »Picture Settings« and confirm with
»«.
­ Picture menu shall be displayed.
Note: 7 For other settings, refer to the »Picture
Settings« section.
Audio settings in video and audio files You can change the audio settings while playing video and audio files
1 Press »q« during playback.
2 Select »Audio Settings« and confirm with
»«.
­ Sound menu shall be displayed.
Note: 7 For other settings, refer to the »Audio
Settings« section.
Turning shuffle on for audio files You can put the audio files in the external data medium on shuffle.
1 Press »q« during playback. 2 »Shuffle: Confirm the “Off” with »«
button. ­ Shuffle mode will turn on for tracks in the
external data medium.
Note: 7 Select »Shuffle Off« to play the tracks in the
external data medium in sequence.

ENGLISH 55

USB PROCESS ————————————————————
Playing audio files with the screen off You can turn off the screen while playing audio files on external data media.
1 Press »q« during playback.
2 Use »V« or »« to select »Picture Off« and
confirm with »«.
­ Power menu shall be displayed. 3 Use »V« or »« to select »Picture Off« and
confirm with »«.
­ TV Screen turns off and audio files continue to play.
4 Press » r « to turn picture on again. Turning the picture display (only picture files) Pictures can be rotated by 90°.
1 Press »q« during playback.
2 Use »V« or »« to select »Rotate« and
confirm with »«.
­ The picture will turn by 90° clockwise or counterclockwise.
Enlarging the picture display (Zoom) (only picture files)
1 Press »q« during playback.
1 Use »V« or »« to select »Zoom« and
confirm with »«.
2 Press »V« or »« to select »1X«, »2X« or
»4X« and confirm with »«.
56 ENGLISH

GRUNDIG ANDROID TV——————————————
Terms, Conditions and Confidentiality
On the first set-up of your TV, a Terms of Service page is shown by Google for you to accept or decline. This page has buttons for the “Google Terms of Service”, “Google Privacy Policy” and “Google Play Terms of Service”, along with Accept option. Please read these agreements with their visit details on the relevant web pages and select the Accept option accordingly. If you don’t select Accept option at this step, you won’t be able to use Android TV features. Again on initial set-up, Smart TV Terms of Service are displayed. In this contract, the terms of the services provided on your television are explained in detail and detailed information about data processing is given. Please read this agreement carefully.
Sign in with a Google account
Skip this step if you signed in with an existing Google account in the initial set-up.
1 In Home menu, select »Settings« with »<«, »>«, »V« or »« and confirm with »«.
2 Select »Accounts and Login« with »V« and
confirm with »«. 3 Select »Login« and confirm with »« 4 Select »« and press »« to continue
after entering your e-mail address with the screen keyboard.
Select »« and press »« to continue after
entering your account password with the screen keyboard, Follow the instructions displayed on your TV and on the screen of your TV. ­ »Successful« message is displayed on TV
screen.
ENGLISH 57

Home Menu (Home Screen)
Your TV has an Android operating system. Just like your smartphone or tablet, you can find the most practical applications you want on your new Android TV. Just connect your TV to your home network and the Internet to watch TV, play online games, use videos, pictures, music, social sharing apps, the most popular news and sports apps.
As with your Android smartphone or tablets, the home menu is the center of your TV. You can decide what to watch by browsing through the Home menu, app and live TV entertainment options. Home menu has channels to let you discover great content from your favorite apps.
To access the TV home menu, simply press
»p«.
Note:
7 Appearance of Home menu may change with Google software updates.

Open Home menu
1 Press »p«.
2 To open/start an item with »<«, »>«, »V«
or »«, press »«.
3 Press » r « repeatedly or »p« to return to
home screen.
Note: 7 When opening home screen, application/
content playing in the background is stopped. You need to reselect app or content from Home screen to continue.

1

08:40

58 ENGLISH

GRUNDIG ANDROID TVTM—————————————

Home menu settings 1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Device Preferences« with »V« and
confirm with »«.
4 Select »Home Screen« with »V« and
confirm with »«.
­ »Home Screen« menu shall be displayed.
Home Screen
Channels
Customize channels
Enable video preview
Enable audio preview
Applications
Reorder applications
Reorder games
Open source licenses
Android TV Home Page
Android TV Basic Services Note: 7 Additional procedures are explained in the
following sections.

Customize channels in Home menu Home menu is organized as channels. These channels consist of the contents of installed applications. You can customize these channels and have them displayed according to your preference.
1 Select »Customize Channels« from the »Home Screen« menu;
or
Press »p« and go to the bottom of the
screen with »V« on the home screen, select »Customize Channels« and confirm with
»«.
2 Supported applications and channels shall be displayed, customize the options you want the channels to display.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Video/audio preview in home menu channels You can turn the Home menu video/audio preview on or off.
1 From »Home Screen« menu, select »Enable video preview« and/or »Enable audio preview« with »V« or »«.
2 Select the position »On« or »Off« with »«.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

ENGLISH 59

GRUNDIG ANDROID TV——————————————

Sorting of applications in the Home menu applications tab Sort the apps in apps menu of home menu according to your personal preference.
Note: 7 To display the apps menu, select »
Applications« from Home menu and confirm
with »«.
1 Select »Reorder apps« from »Home Screen«
menu with »V« and confirm with »«.
­ Applications menu shall be displayed.
2 Select the application you want to replace
with »«.
3 Move the application to its new position
with »<«, »>«, »V« or »« and confirm
with »«.
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Sorting of applications in the Home menu games tab Sort the apps in games menu of home menu according to your personal preference.
1 Select »Reorder games« from »Home Screen« menu with »V« and confirm with
»«.
­ Games menu shall be displayed.
2 Select the game you want to replace with
»«.
3 Move the game to its new position with »<«, »>«, »V« or »« and confirm with »«.
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Home menu open source licenses View open source licenses of Home menu.
1 Select »Android TV Home« or »Android TV Basic Services« from the »Home Screen« menu with »V« or »« and confirm with
»«.
­ Open source license shall be displayed.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.

60 ENGLISH

GRUNDIG ANDROID TV——————————————

Applications
You can find your Favorite Apps in Apps tab of Home menu.
You can download apps and games from Google Play Store to TV just like with smartphones and tablets.
You can only download apps and games which are compatible with your TV. These may differ from apps and games for smartphones/tablets.
To download applications from Google Play Store, television must be connected to the Internet and must be logged in with a Google account.
Installing apps from Google Play Store
1 Press »p«.
2 Select »Applications« tab with »V« or »« in Home menu.
3 From Applications tab, select »Google Play
Store« application with »<« or »>« and
press »«.
­ Play Store home screen shall be displayed.
4 Select the application you want with »V«,
»«, »<« or »>« and press »«.
­ My application explanation screen shall be displayed.
5 Use »V«, »«, »<« or »>« to select
»Install« and confirm with the »«.
6 The application will be downloaded and installed on your TV.
Note: 7 Depending on the size of the application
and your internet speed, loading time of the application may vary.

Starting an installed application 1 Press »p«.
2 Select »Applications« tab with »V« or »« in Home menu.
3 Select the application you want to start with
»<« or »>« or and confirm with »«.
­ Home screen of the application shall be displayed.
4 Press »p« to quit the application.
Add favorite applications to Home menu applications tab
Add your favorite apps to apps tab of Home menu.
1 Press »p«.
2 Select »Applications« tab with »V« or »« in Home menu.
3 To add favorite application, select »+« with
»<« or »>« and confirm with »«.
­ Select application menu shall be displayed.
4 Select the application you want to add with
»V« or »« and confirm with »«.
­ Application is added to apps tab in Home menu.

ENGLISH 61

GRUNDIG ANDROID TV——————————————

Remove favorite applications from home menu apps tab
Remove your favorite apps from Home menu apps tab.
1 Press »p«.
2 Select »Applications« tab with »V« or »« in Home menu.
3 Select the application you want to remove
from favorites and press and hold the »«.
­ Menu shall be displayed.
4 Select »Remove from Favorites« with »V«
and confirm with »«.
­ Application is removed from applications tab in Home menu.
Sorting of applications in Applications tab
Sort apps in applications tab of Home menu according to your personal preference.
1 Press »p«.
2 Select »Applications« tab with »V« or »« in Home menu.
3 Select the application you want to replace
with »<« or »>« and hold down »«.
­ Menu shall be displayed.
4 Select »Move« with »V« and confirm with
»«.
5 Move the channel to its new position with
»<« or »>« and confirm with »«.
Note: 7 Repeat steps 3 – 5 to sort other applications.

Application Settings
1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Applications« with »V« and confirm
with »«.
­ Applications menu shall be displayed.
Note: 7 Additional procedures are explained in the
following sections.
Removing an installed application
You can uninstall applications you don’t need. 1 Select »Show all applications« from
applications menu with »V« and confirm
with »«.
­ All applications shall be displayed.
2 Select the application you want to remove
with »V« or »« and confirm with »«.
­ Application details shall be displayed.
3 Select »Uninstall« with »V« and confirm
with »«.
4 To confirm uninstallation, press »V« or »« to select »OK«;
or
select »Cancel« and press »« to cancel it. 5 Press » r « to return to the previous menu or
press »p« to return to Home menu.

62 ENGLISH

GRUNDIG ANDROID TV——————————————

Force stopping an app
If an app doesn’t respond for any reason, you can force it to stop. 1 Select »Show all applications« from
applications menu with »V« and confirm
with »«.
­ All applications shall be displayed.
2 Select the application you want to stop with
»V« or »« and confirm with »«.
­ Application details shall be displayed.
3 Select »Force Stop« with »V« and confirm
with »«.
4 Select »OK« with »V« or »« to confirm;
or
select »Cancel« and press »« to cancel it. 5 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Clear application data
You can clear application data.. 1 Select »Show all applications« from
applications menu with »V« and confirm
with »«.
­ All applications shall be displayed.
2 Select the application whose data you want to clear with »V« or »« and confirm with
»«.
­ Application details shall be displayed.
3 Select »Clear data« with »V« and confirm
with »«.
4 Select »OK« with »V« or »« to confirm;
or
select »Cancel« and press »« to cancel it. 5 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Clear application cache
You can clear application cache. 1 Select »Show all applications« from
applications menu with »V« and confirm
with »«.
­ All applications shall be displayed.
2 Select the application whose data you want to clear with »V« or »« and confirm with
»«.
­ Application details shall be displayed.
3 Select »Clear cache« with »V« and confirm
with »«.
4 Select »OK« with »V« or »« to confirm;
or
select »Cancel« and press »« to cancel it. 5 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Clear application defaults
You can delete application default preferences.. 1 Select »Show all applications« from
applications menu with »V« and confirm
with »«.
­ All applications shall be displayed.
2 Select the application whose data you want to clear with »V« or »« and confirm with
»«.
­ Application details shall be displayed.
3 Select »Clear cache« with »V« and confirm
with »«.
4 Select »OK« with »V« or »« to confirm;
or
select »Cancel« and press »« to cancel it. 5 Press » r « to return to the previous menu or
press »p« to return to Home menu.

ENGLISH 63

GRUNDIG ANDROID TV——————————————

Application notifications
You can turn application notifications off and on.
1 Select »Show all applications« from applications menu with »V« and confirm
with »«.
­ All applications shall be displayed.
2 Select the application you want to set the notification preference with »V« or »«
and confirm with »«.
­ Application details shall be displayed.
3 Select »Notification« with »V« and select
»On« or »Off« with »«.
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Edit application permissions
You can edit application permissions.
1 Select »Application permissions« from applications menu with »V« and confirm
with »«.
­ Application permissions menu shall be displayed.
2 Select the application permission type you want to edit with »V« or »« and confirm
with »«.
3 Select the application permission you want to edit with »V« or »« and select the
option »On« or »Off« with »«.
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Private application access
You can edit application access.
1 Select »Private application access« from applications menu with »V« and confirm
with »«.
­ Private application access menu shall be displayed.
2 Select the private application permission type you want to edit with »V« or »« and
confirm with »«.
3 Select the private application permission you want to edit with »V« or »« and
select the option »On« or »Off« with »«.
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Application security and restrictions
1 Select »Security and restrictions« from applications menu with »V« and confirm
with »«.
­ Security and restrictions menu shall be displayed.
2 Select »Unknown sources« or »verify applications« with »V« or »« and select »On« or »Off«.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

64 ENGLISH

CHROMECAST BUILT-INTM —————————————-

Your TV has Chromecast built in. You can instantly switch from your phone, tablet or laptop to TV. With the Chromecast built-in feature, you can cast all your favorite movies, TV shows, apps, games and more directly to your TV. Chromecast runs on Android and iOS. Your mobile device or computer must be connected to the same Wi-Fi home network as your TV.
For more information; visit www.support.google. com/androidtv.
Turning TV on with Chromecast
When the TV is in stand-by mode, you can send content to the TV via Chromecast and turn the TV on.
1 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
2 Select »Network and Internet« with »V«
and confirm with »«.
­ Network and Internet menu shall be displayed.
3 Select the »On« position of »Wake On Wireless Network« and »Wake On LAN«
with »V« and confirm with »«.
4 Select »OK« to confirm the switch-on;
or
»Cancel« to cancel and press »« to confirm.
Note: 7 When this Setting is set to On, your TV’s
power consumption may increase.
5 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Using Chromecast on an Android or iOS mobile device

You may cast photos, videos or games using an application with Chromecast feature or from an iOS mobile device to your TV.

Notes
7 The Android TV and your mobile device shall have the latest version of Chromecast application installed.

7 Chromecast function works on Android 2.3 and above for Android devices and on iOS versions 7.0 and above for Apple iOS devices.

7 Broadcasting from Google Chrome browser is not supported on mobile devices.

1 The TV and the mobile device shall be connected to the same network.

2 Start the application featuring Chromecast from the mobile device.

3 Press the screen.

symbol on the application

4 Select TV from the list to start playback. ­ The content starts to be played on the TV screen.

ENGLISH 65

CHROMECAST BUILT-IN ——————————————-

Cast the Chrome browser tab on your TV via PC
You can cast Chrome tab or your PC screen on your TV via Chromecast.
You can cast most web content. But some plugins may not work.
Notes 7 To use the Chromecast feature on PC
without any problem, you must be using the latest version of the Chrome browser on PC.
7 Your computer must be connected to the same Wi-Fi home network as your TV.
Cast a tab in the Chrome browser on TV
1 Open the Chrome browser on your computer.
2 Click » « in the upper right corner of the browser.
3 Click »Cast«. ­ »Cast« tab and Chromecast supported devices that are on the same network shall be displayed.
4 Select your TV and cast chrome browser tab on your TV.
5 To end, click the » « icon located to the right of the browser’s address bar and select »Stop Cast«.

Cast computer screen on TV
1 Open the Chrome browser on your computer.
2 Click » « in the upper right corner of the browser.
3 Click »Cast«. ­ »Cast« tab and Chromecast supported devices that are on the same network shall be displayed.
4 Click down arrow next to »Cast to« at the bottom of the »Cast« tab.
5 Click »Cast desktop«.
6 Select your TV displayed in the »Cast« tab and cast your computer screen on your TV.
7 To end, click the » « icon located to the right of the browser’s address bar and select »Stop Cast«.
Cast music or video files from the computer to the TV
1 Open the Chrome browser on your computer.
2 Click » « in the upper right corner of the browser.
3 Click »Cast«. ­ »Cast« tab and Chromecast supported devices that are on the same network shall be displayed.
4 Click down arrow next to »Cast to« at the bottom of the »Cast« tab.
5 Click »Cast file«. ­ The file browser shall be displayed.
6 Select the music or video file you want to cast and select your TV displayed in the »Cast« tab and play the file on your TV.
7 To end, click the » « icon located to the right of the browser’s address bar and select »Stop Cast«.

66 ENGLISH

DEVICE PREFERENCES———————————————–

1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Device Preferences« with »V« and
confirm with »«.
­ »Device Preferences« menu shall be displayed.
Device Preferences
i About
Date and Time
Timer
Language
Keyboard
Gboard
Inputs
Power
Picture
Sound Note: 7 Additional procedures are explained in the
following sections.

About
In this menu, you can check system updates, change the device name, and view the status and license information of the device.
1 Select »About« from the »Device
Preferences« menu and confirm with »«.
­ »About« menu shall be displayed.
System update 1 Select »System Update« from the »About«
menu and confirm with »«.
­ System updates are checked. If there is a system update, after your approval, the update will be downloaded and your device will be updated.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Change device name 1 Select »Device name« from the »About«
menu with »V« and confirm with »«.
2 To change the device name select »Change« with »V« or »«;
or
select »Change« and press »« to cancel
it.
3 You can use one of the suggested device
names with »V« or »«, or press »« to
give your device a name by selecting »Enter Custom Name …«
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.

ENGLISH 67

DEVICE PREFERENCES———————————————–

Restart 1 Select »Restart« from the »About« menu with
»V« and confirm with »«.
2 To restart the device select »Restart« with »V« or »«;
or
select »Cancel« and press »« to cancel it.
View status information In this menu, you can view the device’s IP address, MAC addresses and serial number. 1 Select »Status« from the »About« menu with
»V« and confirm with »«.
­ IP address, MAC address, Serial number and On time shall be displayed.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.
View legal information In this menu, you can view Open source licenses, Google legal information, System web view licenses and notifications about Ads. 1 Select »Legal Information« from the »About«
menu with »V« and confirm with »«.
2 Select the information you want to view with
»V« or »« and confirm with »«.
– After a short while, the information you selected shall be displayed.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

View other information 1 From the »About« menu you can view
the information of »Model«, »Version«, »Software Version«, »Netflix ESN«, »Android security patch level«, »Core version« and »Build« with »V«.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Date and time settings
You can view and manage system date and time information in this menu.
1 Select »Date and time« from the »Device
Preferences« menu and confirm with »«.
­ »Date and time« menu shall be displayed.
Automatic date and time adjustment It is the date and time information provided by the network.
1 Select »Automatic date and time« from “Date and time” menu with »V« and
confirm with »«.
2 Use »V« or »« to select »Use time provided by network« and confirm with
»«.
Note: 7 When using the time provided by the
network, the options »Set date« and »Set time« in the »Date and time« menu are not active.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

68 ENGLISH

DEVICE PREFERENCES———————————————–

Manual date and time adjustment 1 Select »Automatic date and time« from
“Date and time” menu with »V« and
confirm with »«.
2 Use »V« or »« to select »Off« and
confirm with the »«.
3 Select »Set Date« with »V« and confirm
with »«.
4 Select the value with »V« or »«, and the
next option with »>«, select day, month and
year, respectively, and confirm with »«.
5 Select »Set Time« with »V« and confirm
with »«.
6 Select the value with »V« or »«, and
the next option with »>«, select hour and
minute, respectively, and confirm with »«. 7 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Set time zone 1 Select »Set time zone« from “Date and time”
menu with »V« and confirm with »«.
2 Select your time zone with »V« or »«
and confirm with »«. 3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Set time format 1 From the »Date and time« menu select »Use
24-hour format« with »V« and select »On«
to use 24-hour format with »« or »Off« to
use 12-hour format.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Timer settings
You can manage timer On and Off settings in this menu.
1 Select »Timer« from the »Device
Preferences« menu and confirm with »«.
­ »Timer« menu shall be displayed.
Auto on timer 1 Select »On Time Type« from the »Timer«
menu with »V« and confirm with »«.
2 Press »V« or »« to select »On« or
»Once« and confirm with »«.
­ »On«: TV is turned on every day at the time entered.
­ »Once«: TV is turned on once at the time entered, it does not repeat every day.
Note: 7 »Auto On Time« is active in the menu when
»On time type« »On« or »Once« selected.
3 Select »Auto On Time« with »V« and
confirm with »«.
4 Select the value with »V« or »«, and
the next option with »>«, select hour and
minute, respectively, and confirm with »«.
5 Press » r « to return to the previous menu or
press »p« to return to Home menu.

ENGLISH 69

DEVICE PREFERENCES———————————————–

Automatic shut down 1 Select »Off Time Type« from the »Timer«
menu with »V« and confirm with »«.
2 Press »V« or »« to select »On« or
»Once« and confirm with »«.
­ »On«: TV is turned off every day at the time entered.
­ »Once«: TV is turned off once at the time entered, it does not repeat every day.
Note: 7 »Auto Off Time« is active in the menu when
»Off time type« »On« or »Once« selected.
3 Select »Auto Off Time« with »V« and
confirm with »«.
4 Select the value with »V« or »«, and
the next option with »>«, select hour and
minute, respectively, and confirm with »«.
5 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Language settings
You can manage the TV language settings in this menu.
1 Select »Language« from the »Device
Preferences« menu and confirm with »«.
­ »Language« menu shall be displayed.
2 Use »V« or »« to select language value
and confirm with the »«.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Keyboard settings
You can manage the virtual keyboard settings in this menu. 1 Select »Keyboard« from the »Device
Preferences« menu and confirm with »«.
­ »Keyboard« menu shall be displayed.
Current keyboard 1 Select »Current keyboard« from the
»Keyboard« menu with »V« and confirm
with »«.
2 Use »V« or »« to change keyboard
choice and confirm with the »«.
Note: 7 To change current keyboard, a 3rd party
keyboard application must be downloaded from Play Store.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Gboard Settings Gboard keyboard is the built-in keyboard of the TV, you can adjust its settings in this menu. 1 Select »Gboard Settings« in the »Keyboard«
menu with »V« and confirm with »«.
2 With »V« or »« you can change the Keyboard language, view the Terms of Service, Privacy Policy, Open source licenses or share Usage statistics.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

70 ENGLISH

DEVICE PREFERENCES———————————————–

Manage Keyboards 1 Select »Manage Keyboards« from the
»Keyboard« menu with »V« and confirm
with »«.
­ Available virtual keyboards shall be displayed.
2 Select Keyboard with »V« or »« and
select the position »On« or »Off« with »«.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Storage settings
You can manage storage settings in this menu.
1 Select »Storage« from the »Device
Preferences« menu and confirm with »«.
­ »Storage« menu shall be displayed.
Internal storage area 1 Select »Internally shared storage area« from
the »Storage« menu with »V« and confirm
with »«.
2 With »V« or »« you can view the categories used by the internal storage and view the applications and files available on your device under these categories.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Removable storage area 1 Select the external data medium under
»Removable storage area« with »V« in the
»Storage« menu and confirm with »«.
2 With »V« or »« you can view categories using external storage and clear files you don’t need on your device under these categories.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Using removable storage area as device storage area You can set up an external data medium as device storage so that you can install applications that you will download for the device to this storage.
1 Select the external data medium under »Removable storage area« with »V« in the
»Storage« menu and confirm with »«.
2 Select »Delete and format as storage area«
with »V« or »« and confirm with »«.
3 Select »Format« to format the external data medium;
or
»Cancel« to cancel and press »« to confirm.
Important: 7 This action will delete all data on the
external data medium.
7 After formatting, the external data medium can only be used in this device.
4 After formatting is complete, select »Move Now« and confirm with »« to move your photos, files and application data to the external data medium. ­ Your data is moved to external data media.
5 Press » r « to return to the previous menu or
press »p« to return to Home menu.

ENGLISH 71

DEVICE PREFERENCES———————————————–

Store Mode settings
The store mode is the promotion mode of the device, the promotional video and feature logos of the device are displayed. You can turn the store mode on and off in this menu.
1 Select »Store Mode« from the »Device
Preferences« menu and confirm with »«.
­ »Store Mode« menu shall be displayed.
2 Use »V« or »« to select »Store Mode«
and confirm with »«.
3 Select »Continue« to activate store mode;
or
»Cancel« to cancel and press »« to confirm.
Important: 7 Turning on store mode may increase the
TV’s power consumption.
4 Select »On« to turn store mode on;
or
»Cancel« to cancel and press »« to confirm.
5 Select »Store Mode Message« with »V«
and confirm with »«.
6 Select among »Promotional Video«, »Store Logo« or »Promotional Video&Store Logo«
with »V« or »« and confirm with »«.
7 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Google Assistant settings
You can manage Google Assistant settings in this menu.
1 Select »Google Assistant« from the »Device
Preferences« menu and confirm with »«.
­ »Google Asistan« menu shall be displayed.
2 With »V« or »« you can view the Connected account, edit Scannable applications, activate the Safe scan filter or view open source licenses.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Chromecast built-in
View the chromecast built-in license, version and serial number in this menu.
1 Select »Chromecast built-in« from the »Device Preferences« menu and confirm
with »«.
­ »Chromecast Built-in« menu shall be displayed.
2 You can select and view Open source license, version number or serial number with »V« or »«.
Note: 7 For information on using the Chromecast
feature, see Chromecast Built-in section.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

72 ENGLISH

DEVICE PREFERENCES———————————————–

Screen Saver settings
1 Select »Screensaver« from the »Device
Preferences« menu and confirm with »«.
­ »Screensaver« menu shall be displayed.
2 Use »V« or »« to select »Screensaver«
and confirm with »«.
3 Select the screensaver type with »V« or »«, select »Screen Off«, »Background« or
»Colours« and confirm with »«.
­ »Screen Off«: At the end of the start time, TV screen is turned off.
­ »Background«: At the end of the start time, background images are displayed on the TV screen.
­ »Colours«: At the end of the start time, changing colours are displayed on the TV screen.
4 Select »Start Time« with »V« and confirm
with »«.
5 Use »V« or »« to select screensaver
activation time and confirm with »«.
6 Select »Switch the device to sleep mode«
with »V« and confirm with »«.
7 If you want the TV to switch to sleep mode when no action is taken, select the time with »V« or »« or if you do not want to switch to sleep mode at all, select »Never« and
confirm with »«.
8 To start the screensaver without waiting for the screensaver time, select »Start now«
with»V« or »« and confirm with »«.
Note: 7 When the screensaver is active, press any
button of the remote controller to exit.
9 Press » r « to return to the previous menu or
press »p« to return to Home menu.

Location settings
You can manage device settings in this menu.
1 Select »Location« from the »Device
Preferences« menu and confirm with »«.
­ »Location« menu shall be displayed.
2 Use »V« or »« to select »Location status«
and confirm with »«.
3 Select »Use Wi-Fi to estimate location« to turn on location service;
or
select »Off« and confirm with »« to switch off location services.
Note: 7 You can also view the applications that
make last location requests in the menu, and you can turn off the location service of the application from the application settings by selecting the application.
4 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Usage and Diagnostic settings
You can have diagnostic data such as deadlock reports, device, application, and built-in chromecast data automatically sent to Google.
1 Select »Usage and Diagnostic« from the »Device Preferences« menu and confirm
with »«.
­ »Usage and Diagnostic« menu shall be displayed.
2 If you want Usage and Diagnostics data to be sent to Google automatically, select »On« with
or
»Off« with »« if you do not want them to be sent.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.

ENGLISH 73

DEVICE PREFERENCES———————————————–

Accessibility settings
You can manage accessibility settings in this menu. 1 Select »Accessibility« from the »Device
Preferences« menu and confirm with »«.
­ »Accessibility« menu shall be displayed.
Voice identification for the visually impaired 1 Select »Voice Description« with »V« from
the »Accessibility« menu and press »« to
select »On«. ­ »Visually Impaired« is active.
2 Select »Visually Impaired« with »V« and
confirm with »«.
­ »Visually Impaired« menu shall be displayed.
3 Select the desired line/function with »V« or
»«, select the value/option with »<«, »>«
or »«. 4 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Enabling the hearing impaired option 1 Select »Hearing Impaired Option« with
»V« from the »Accessibility« menu and
press »« to select »On«. 2 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Enabling Audio Subtitle support 1 Select »Audio Subtitle« with »V« from the
»Accessibility« menu and press »« to
select »On«.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.

AC4 Dialogue enhancement settings 1 Select »AC4 Dialogue Enhancement« from
the »Accessibility« menu with »V« and
confirm with »«.
­ »AC4 Dialogue Enhancement« menu shall be displayed.
2 Press »V« or »« to select »Low«, »Medium«, »High« or »Off« and confirm
with »«.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
Subtitles 1 Select »Subtitles« from the »Accessibility«
menu with »V« and confirm with »«.
­ »Subtitles« menu shall be displayed.
2 Select the desired line/function with »V« or
»«, select the value/option with »<«, »>«
or »«.
3 Press » r « to return to the previous menu or
press »p« to return to Home menu.
High-Contrast text 1 Select »High-Contrast Text« with »V« from
the »Accessibility« menu and press »« to
select »On«.
2 Press » r « to return to the previous menu or
press »p« to return to Home menu.

74 ENGLISH

DEVICE PREFERENCES———————————————–
Resetting the television to its original status
This process will delete all of the data in your device’s internal storage. The data to be deleted are Google account, system and application data, as well as their settings and downloaded applications. 1 Select »Reset« from the »Device
Preferences« menu and confirm with »«.
­ A warning screen shall be displayed. 2 Select »Reset« to confirm the reset;
or »Cancel« to cancel and press »« to confirm. ­ Second warning screen is displayed. 3 Select »Erase all« to confirm the reset; or »Cancel« to cancel and press »« to confirm. 4 Continue from the tv first set-up and adjustment section on page 17.
ENGLISH 75

REMOTE CONTROLS AND ACCESSORIES ————-
You can connect various accessories to your television, e.g. Bluetooth remote controller, game controller, keyboard or mouse. You can display the status of the connected accessory in this menu to make various adjustments.
Note: 7 Accessories are sold separately. It is
not supplied with the television. Please contact your dealer from where you have purchased your TV in order to obtain more information for buying glasses.
1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Remote Controls and Accessories«
with »V« and confirm with »«.
­ »Remote Controls and Accessories« menu shall be displayed and accessories shall be searched.
4 Accessories found shall be displayed in the menu.
5 Select the accessory you want to match with
»V« or »« and confirm with »«. 6 Press » r « to return to the previous menu or
press »p« to return to Home menu.
76 ENGLISH

PARENTAL SETTINGS————————————————

There are movies which contain contents or scenes which are not suitable for children.
Certain programmes contain information which identifies these contents or scenes and have been given an access level from 4 to 18. You can select one of the access levels and thus authorise the playback.
1 Press »p«.
2 Use »<«, »>«, »V« or »« to select
»Settings« and confirm with the »«.
3 Select »Channel« with »V« and confirm
with »«.
­ »Channel« menu shall be displayed.
4 Select »Parental Controls« with »V« and
confirm with »«.
­ »Enter your PIN« message shall be displayed.
Note: 7 PIN code is the PIN code that you have set
at the first set-up of the television.
5 Enter the PIN code with »1…0«. ­ »Enter your PIN« message shall be displayed.
Note: 7 Additional procedures are explained in the
followi

References

• Patents - DTS
• Grundig Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>