Pawaii PWF03FU Wireless Cat Water Fountain Replacement Filters Instruction Manual
- June 15, 2024
- PAWAii
Table of Contents
Pawaii PWF03FU Wireless Cat Water Fountain Replacement Filters
Tested and Certified by NSF International against NSF/ANSI Standard 42 in model WF03FU for the reduction of the claims specified on the Performance Data Sheet, and to NSF/ANSI 372 (≤0.25% lead)
System Model No: WF03FU
Substance reduction
The system has been tested and certified by NSF International according to NSF/ANSI Standard 42 and NSF/ANSI Standard 372. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for the water leaving the system, as specified by NSF/ANSI Standard 42. While testing was performed under standard laboratory conditions, actual performance may vary.
Performance data sheet
System to be used with municipal or well water sources treated and tested regularly to ensure bacteriologically safe quality. Do not use water that is microbiological unsafe or of unknown quality without adequate disinfection before or after the system. Testing was performed under standard laboratory conditions, actual performance may vary.
Step 1
Remove the filter and tear off the heat shrinkage film on its surface. Then
soak the filter in water for 5 minutes.
Step 2
Pick up the external water pump and water tray, and remove the old filter.
Step 3
Install the new filter and place the water tray and external water pump back
in that order.
Step 4
Reset the filter lifespan on the device or APP after the replacement is
complete.
Pawaii Inc.
E-mail: support@pawaii.com
Tel: +1(833)810-3600(U.S.)
Address: 251 Little Falls Drive, City of Wilmington, County of New
Castle, DE 19808
Manufacturer: Qingdao Ecopure Filter Co., Ltd.
Facility: Qingdao, China
EPA Establishment No.: 101387-CHN-1|
Made in China V001