ADLER EUROPE AD 1176 Weather Station User Manual

ADLER EUROPE AD 1176 Weather Station

SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The appliacable voltage is 100-240V~50/60Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are c arried out under supervision.
6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
7. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
8. Never put the power cable, the plug or the whole device into the water . Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
9. Periodically check the power cable condition. If the power cable is damaged the product should be turDOWN to a professional service location to b e replaced in order to avoid hazardous situations.
10. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
11. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
12. Never use the product close to combustibles.
13. Do not let cord hang over edge of counter.
14. Do not immerse the motor unit in water.
15. The device must be used and stored in a dry place only.
16. Do not allow to come into contact with water. If the device gets wet, disconnect the plug from the mains socket with dry hands. Then bring the device to a service facility for a check or repair.
17. Do not place any objects on the device.
18. Make sure that vents are always uncovered. An obstructed vent may cause damage to the device or even a fire.
19. Do not place open flame or heat sources on the device or in the vicinity.
20. If you are not going to use the device for a period longer than one week, do not leave batteries inside.

Description of the device.

( Weather Station)

Control panel: Buttons 1.a. MODE, 1b.UP, 1.c. DOWN, 1.d. ALARM, ,1E. Max/Min 1G. SNOOZE/LIGHT， Display:

1. Clock 2.Inside temperature 3. Outside temperature 4. Probe 5. Weather Forecast 6. Alert Indicator
2. Operation Instruction
   Insert the battery (2xAA) into the device or connect adapter after a few seconds, LCD will light up, after a beep, it enters default mode. Into the probe insert 2x AAA battery.

Time Setting
Under default state, press and hold “MODE”(1a) for 4 seconds to enter setting in sequence, the time will start to flash.

Setting item blinking at 1s frequency.
Press “UP”(1b) key, the data goes up one step; press and hold for 2 seconds or more, it will go ahead at 8 steps per second speed.
Press the “DOWN”(1c) key, the value goes down one step; press and hold for 2 seconds, go back at 8 steps per second speed.

After setting, press “MODE”(1a) to confirm/exit.
After 10 seconds of not pressing any button, the device will exit the change mode and will save all current settings that were changed to that point. The order of the setup goes as follows:
Hour FORMAT 24/12h → Hour → Minute→ Year→ Month→ Day→ Temperature format C/F→ Exit

Alarm Setting

• To turn on alarm press the “ALARM”(1d) button once. The alarm icon will appear above the time and the last alarm setting will appear.
• Press and hold “ALARM”(1d) Button for 2 seconds and the first digit of the setting will start to Flash.
• Setting item blinking at 1s frequency.
• Press “UP”(1b) key, the value goes ahead one step; press and hold for 2 seconds, go ahead at an 8 step per second speed.
• Press “DOWN”(1c) once and back; press and hold for 2 seconds, go back at an 8 step per second speed.
• After setting, press “ALARM”(1d) to confirm and exit.
• After 10 seconds of not pressing any button, the device will exit the change mode and will save all current settings that were changed to that point. AL2 Setting is the same as the AL1 setting.
• Setting in sequence: Alarm Hour→Alarm Minute →Exit

Alarm ON/OFF

• When the alarm turns on you can press. “ALARM”(1d) button to shut it off. You can also press the “Snooze”(1f) button. It will turn off again after the Snooze time runs out after 5 minutes.
• After 2 minutes of working the alarm will shut down of its own accord.
• To change the backlight strength press “SNOOZE/LIGHT”(1f) once. The device has 2 settings. 1. Maximum backlight 2. Minimum backlight.
• You can turn on the snooze function without limit.
  Snooze could be repeated all the time.

The alarm has 3 settings.

• 0-10 seconds after the alarm starts, the device will make a noise 1 time per second
• 10-20 seconds after the alarm starts, the device will make a noise 2 time per second
• Over 20 seconds after the alarm starts, the device will make a noise 4 time per second 2.5 Temperature and Humidity Function
• Out of the indoor and outdoor temperature display, the low-end displays “Lo”, the high-end displays “Hi”. You can check the lowest and highest recorded temperatures by pressing the „Max/Min” briefly to cycle between them.
• Indoor temperature upper limit: 50C, lowest limit: 0C.
• Outdoor temperature upper limit: 70C, lowest limit: -40C.

Date check
To check the Date. In default mode, press the „Mode”(1a) button once.

Alarm time check.
To check the Alarm setting. In default mode, press the „Mode”(1a) button twice.

TECHNICAL DATA

• Supply voltage – Station: AC 100-240 V 50 / 60Hz plus 3 1.5V AAA batteries
• Supply voltage – Probe: 2 1.5V AAA batteries. Frequency: 433.99 MHz Power: 0,115 mW
• Adler Sp. z o.o. Ordona 2a, 01-237 Warsaw, Poland hereby declares that the AD1176 device complies with the Directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following internet address:
• https://www.adler.com.pl/dane/deklaracje/CE/ad_1176.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>