PSP-B Ring Adapter User Manual
- June 15, 2024
- PSP
Table of Contents
PSP-B Ring Adapter
Product Information
PSP-B Ring Adapter
Specifications:
- Ring Adapters: PSP-42B, PSP-50B, PSP-56B
- Designed to mount Krypton and Proton devices on lenses of various daylight devices
- Bayonet connection for quick mounting and removal of thermal imaging module
- Precise positioning mechanism for perfect alignment of thermal imaging or night image in the field of view of daylight optics
- Package Contents: PSP B Ring Adapter, Allen keys (S2, S4),Inserts, User manual, Warranty card, Double-sided tape
Mounting the Adapter on the Device:
Step 1. Pick up an insert
- Select the Ring Adapter (2) with the insert (6) of the desired diameter depending on the outer diameter of the lens of your optical device (7) (see table).
- The designation 42 mm / 50 mm / 56 mm in the name of the adapter means the lens diameter of the optical device.
Step 2. Install the insert into the adapter
- Apply 2-3 strips of double-sided tape to the outer surface of the insert of your choice (6).
- Push the insert (6) of your choice into the Ring Adapter(2) until it stops.
Step 3. Mount the adapter on the optical device
- Move the lever(5) to the OPEN position.
- Degrease the lens body of the optical device(7) before installing the Ring Adapter(2).
- Mount the Ring Adapter (2) with the insert (6) onto the lens of the daylight optical device(7) as far as it will go.
Step 4. Adjust adapter lever
Selection Table for Optical Device Inserts:
Ring Adapter model| Insert internal diameter, mm| Suitable for lens housing of
daylight optical devices with an
outer diameter of, mm
---|---|---
PSP 42B (SKU 79206)| 45.5| 45.5
Mounting the Thermal Imaging Module on the Adapter:
Step 1. Mount the thermal imaging module on the adapter
- Remove the protective cover from the eyepiece of the thermal imaging module.
- Align the protrusions on the adapter (2) with the grooves of the mount assembly (1) of the thermal imaging module and turn the thermal imaging module counterclockwise as far as it will go.
Step 2. Adjust the display position of the thermal imaging module
- Align top and bottom display boundaries parallel to the horizontal axis by turning the adapter with thermal imaging module clockwise or counterclockwise.
- Move the lever (5) to the CLOSE position.
Recommendations for Using the PSP B Ring Adapter:
When installing the PSP B Ring Adapter on the riflescope, the gap between
the adapter and the rifle body must be at least 5 mm. If the gap is
insufficient, use higher rings to mount the riflescope.
FAQ:
Q: What devices are compatible with the PSP-B Ring Adapter?
A: The PSP-B Ring Adapter is designed to mount Krypton and Proton devices
on lenses of various daylight devices.
Q: How do I choose the right insert for my optical device?
A: Refer to the Selection Table for Optical Device Inserts in the user
manual. Match the internal diameter of the insert with the outer diameter of
your optical device’s lens housing.
Q: How do I mount the thermal imaging module on the adapter?
A: Follow the steps outlined in the Mounting the Thermal Imaging Module
on the Adapter section of the user manual. Make sure to align the protrusions
on the adapter with the grooves of the mount assembly of the thermal imaging
module.
PSP-B Ring Adapter
Manual
Description
Ring Adapters PSP-42B, PSP-50B and PSP-56B are designed to mount Krypton and
Proton devices on the lenses of various daylight devices
The bayonet connection allows you to quickly mount and remove the thermal
imaging module from the adapter.
The precise positioning mechanism enables the perfect alignment of a thermal
imaging or night image in the field of view of daylight optics to achieve
maximum viewing comfort.
Package Contents
- PSP B Ring Adapter
- Allen keys (S2, S4)
- Inserts
- User manual
- Warranty card
- Double-sided tape
Mounting the Adapter on the Device
https://www.youtube.com/embed/9zMlPyf5Q9A
Step 1. Pick up an insert
- Select the Ring Adapter (2) with the insert (6) of the desired diameter depending on the outer diameter of the lens of your optical device (7) (see table).
- The designation 42 mm / 50 mm / 56 mm in the name of the adapter means the lens diameter of the optical device.
Step 2. Install the insert into the adapter
- Apply 2-3 strips of double-sided tape to the outer surface of the insert of your choice (6).
- Push the insert (6) of your choice into the Ring Adapter(2) until it stops.
Step 3. Mount the adapter on the optical device
- Move the lever(5) to the OPEN position .
- Before installing the Ring Adapter(2) onto the optical device, it is recommended to degrease the lens body of the optical device(7).
- Mount the Ring Adapter (2) with the insert (6) onto the lens of the daylight optical device(7) as far as it will go.
Step 4. Adjust adapter lever
- Move the lever(5) from its initial OPEN position to the CLOSE .
- Loosen the locking screw(4) with a 2mm Allen key.
- Tighten the screw (3) with an Allen key (S = 4mm). The clamping force should be 1.5-2 Nm (13.3-17.7 in-lbs) (use a torque screwdriver) to ensure the lever (5) is correctly tightened, while the Ring Adapter should not move relative to the body of the optical device (7). If necessary, tighten or loosen the screw(3) to operate the lever (5) in the best way possible.
- Tighten the locking screw (4) as far as it will go
Selection Table
Selection Table for Optical Device Inserts
Mounting
Mounting the Thermal Imaging Module on the Adapter
Step 1. Mount the thermal imaging module on the adapter
- Remove the protective cover from the eyepiece of the thermal imaging module.
- Align the protrusions on the adapter (2) with the grooves of the mount assembly (1) of the thermal imaging module and turn the thermal imaging module counterclockwise as far as it will go.
Step 2. Adjust the display position of the thermal imaging module
- Loosen the screw (8) with an Allen key (S = 4mm).
- Turn on the thermal imaging module.
- Align the image center on the display with the image center of the optical device by tilting the thermal imaging module.
- Tighten the screw (8) as far as it will go. The clamping force should be 5 N·m (44.3 in-lbs) (use the torque screwdriver to check).
- Move the lever (5) to the OPEN position .
- Align top and bottom display boundaries parallel to the horizontal axis by turning the adapter with thermal imaging module clockwise or counterclockwise.
- Move the lever (5) to the CLOSE position .
Recommendations
Recommendations for Using the PSP B Ring Adapter
When installing the PSP B Ring Adapter on the riflescope, the gap between the
adapter and the rifle body must be at least 5 mm.
If the gap is insufficient, use higher rings to mount the riflescope.
Legal Compliances and Disclaimers
The manufacturer reserves the right at any time, without mandatory prior notice to the Customer, to make changes to the package contents (subject to the applicable laws, if any), design and characteristics that do not impair the quality of the Product.
For technical support please contact support@pulsar- vision.com.
Answers to frequently asked questions about the devices can also be found in the FAQ section.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>