SUPERNOTE A6-X2 C Nomad Back Teaser User Manual
- June 15, 2024
- SUPERNOTE
Table of Contents
SUPERNOTE A6-X2 C Nomad Back Teaser
Product Information
Specifications
- Model: SUPERNOTE A6 X2-C
- Battery Capacity: 5.0 V 2.0 A
- IC: 24370-A6X2
- HVIN: A6-X2C
- FCC ID: 2AQZ9-A6-X2
- Made in China
- 5 GHz band (W52): Indoor use only
Product Usage Instructions
Charging
To charge the device, follow these steps:
- Connect the device to a power source using the provided charging cable.
- The input voltage should be 5.0 V and the input current should be 2.0 A.
- Ensure that the device is properly connected and the charging indicator light turns on.
- Wait until the battery is fully charged before disconnecting the device from the power source.
Body Worn Operation
When using the device in body worn operation, please note the following guidelines:
- The device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal.
- Ensure that the accessory positions the device a minimum of 0 mm from the body to comply with RF exposure guidelines.
Frequently Asked Questions (FAQ)
What is the SAR information for this device?
The Specific Absorption Rate (SAR) information for this device is as follows:
- FCC Device: The device meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal.
- ISED Device: The device meets the ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal.
Specifications
-
Display
7.8 inch monochrome digital-paper display 1872 x 1404 resolution (300 DPIJ
E Ink Carta Display -
Size & Weight
191mm (LJ x 139mm (WJ x6.9mm (HJ 265g -
Operation System
Chauvet – Handwriting OS based on Android -
Work Environment
0°C – 40°C
32’F – 104’F -
Battery
Model: U2366130PHV 2700mAh sv 2A
Rechargeable (USB type-CJ -
Memory Storage
4GB RAM
32GB FLASH memory (Expandable)
‘” This product does not include a power adaptor, please use one that meets the industrial standard.
Important information
-
Screen Safety
The screen is delicate – please protect it from bumps, drops, scratches, or anything that could apply damaging force. -
Magnetism and Static Hazard
Keep clear of powerful magnets and static electricity buildup which can harm internal components. -
Operating Conditions
Please avoid exposing the device to extreme or hazardous environments that could cause damage, including high or low temperatures, excessive dryness or humidity, smoke, and heavy dust. -
Liquid Exposure Caution
This device is not waterproof. Please avoid contact with any liquids, including water, which could cause damage to components. -
Warranty Coverage for Internal Repairs
The product warranty only remains valid if internal components are accessed by following official instructions solely for sanctioned replacement purposes. Unauthorised disassembly voids the warranty.
Activate your Supernote
-
Power on
Long press the power button to power on your Supernote device. -
Setup
Follow the on-screen instructions to start your first note.
To view the complete User Guide, visit: support.supernote.com
Other items included: USB cable, screw driver
Check product certifications
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information
- SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency banes, alter you are a wireless ase station anties, ent ower the powel, tupatual SAR level of the phone while operating can be well below the maximum value, in general,
- Borean evide evior a m polios ale to those me bat tended and tried yas equitatif the s not exceed the exposure limit established by the FC Test
- For body worn operation, this model device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the eut a minimum of 0 mm from the body.
- Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
ISED RSS Warning/ISED RF Exposure Statement
ISED RSS Warning: This device complies with Innovation, Science and Economic
Development Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: 1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may
cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
RF Exposure Information (ISED SAR) :
This device has been tested ISED SAR and meets the ISED limit.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the
ISED with the device transmitting at its highest certified power level in all
tested frequency bands, although the SAR is determined at the highest
certified power level, the actual SAR level of the device while operating can
be well below the maximum value, in general, the closer you are to a wireless
base station antenna, the lower the power output. Before a new model device is
a available for sale to the public, it must be tested and certified to the
ISED that it does not exceed the exposure limit established by the ISED Test s
for each device are performed in positions and locations (e.g. at the ear and
worn on the body)as required by the ISED . For body worn operation, this model
device has been tested and meets the ISED RF exposure guidelines when used
with an accessory designated for this product or when used with an accessory
that Contains no metal and that positions the eut a minimum of 0 mm from the
body. Non-compliance with the above restrictions may result in violation of RF
exposure guidelines.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>