Leroy Merlin ZY002-01 Bluetooth Speaker Waterscape Light User Manual
- June 15, 2024
- LEROY MERLIN
Table of Contents
Product Manual
Product Name: Bluetooth Speaker Waterscape Light
Model : ZY-002
ZY002-01 Bluetooth Speaker Waterscape Light
Product Introduction
‘This product is an indocr decorative piece that seamless- Iy blends modern
technology with art. With its clever fusion of dynamism and tranquility, its
circular and harmonious design, vibrant and colorful lighting effects,
melodious bluetooth speaker, and lively hydroponic ecosystem, it promises to
deliver a pinracle of enjoyment for your visual, auditory, and psychological
senses.
This product is exceptionally versatile and well-suited for a variety of
settings, including living rooms, bedrooms, offices, dining areas, hotels, and
gardens.
If you choose to gift it to your friends and families, you can be certain it
will bring them great surprise and joy!
Technical Specifications
- Input Power: 10W (5V/2A)
- Charging Port: TYPE-C USB
- White Light Beads: 24 LEDs 2835 Full Spectrum
- RGB Lighting: 23 LEDs 5050
- Bluetooth Name: ZY-002
- Bluetooth Frequency: 2.4GI 12-2.48GH Iz
- Transmission Range: 10 Meters
- Frequency Range: 50Hz-20KHz
- Overall Signal-to-Noise Ratio: Greater than 75db
- Speaker Specifications: 40 SW
- Water Pump Head: 38cm10%
- Product Dimensions: 322x270x100mm
- Product Weight: 980g
Operating Instructions
-
Power On: Insert the Type-C charging cable to power on (please use a 5V adapter and a 2A charging cable). When powered on, Bluetooth will automatically activate, and four touch- keys will flash simultaneously, indicating readiness for operation.
-
Bluetooth Connection: After powering on, activate bluetooth on your mobile phone and search for “ZY-002” to connect and play music from your device.
-
Turning On the Lights:
1. REB Lighting: Lightly touch the flashing button to switch between 15 RGB lighting modes (6 constant colors + 9 flash patierns). Alternatively, use the 15 colored light buttons on the remote gontrol. To turn off RGB lighting, press and hold the button for 2s or use the remote control’s power-off button .
2. White Light: Lightly touch the flashing button to activate the 3-level white light mode (powerful,soft dim). Attenatively, use the conresponding button on the remote control White light provides a full spectrum of sunlight, sutable for plant photosynthesis. To turn off white light, press and hold the button it for 2s or use the remote control’s power-off button .
3. Music Sync Lights: When piying bluetooth music on the device, ighty touch the fashing butony Jor use the Gorresponding button on the remote control to activate the music sync light mode. The lights will pulse with the music volume. To turn off the music sync lights, press and hold the button [for 25 or use the remote control’s power-off button . -
Starting the Water Pump: Lightly touch the flashing butto to start the water pump, which circulates water in the tank.
It is recommended to keeping the water pump running continuously for the growth of plants and fish and for water purification. Do not start the water pump if there is no water in the tank. -
Power Off: Simply unplug the Type-C charging cable to tum off all functions.
Note 1: When the four buttons are flashing, it indicates standby mode, while a steady ight indicates working mode.
Note 2: Activating any one of the three lighting modes wil automatically tun off the other two lighting modes.
Note 3: The remote control buttons control only the lights and cannot control the water pump or blustooth. To tum off all functions, please unplug the power cord. -
Remote Control Diagram:
-
Using the Water Tank
Hydroponic Plants: Secure the green plants in place by inserting them into the sponge (if the plants are larger, you can skip using the sponge). Place the plants in the plant basket, and insert it into the hole on the water tank cover (align the notches with the slots and rotate to secure). Fill the water tank with water, ensuring that the roots of the green plants come into contact with the water level. Tuning on the whie light can enhance the photosyn- thesis process for the green plants.
Keeping Small Fish: To
raise small fish, remove the top.
cover of the water tank and gently place the fish into the tank. Remember to feed them regularly with fish food. Itis recommended to keeping the water pump running continu- ously as it provides vitality o the fish and helps filter impuri- ties from the water. If the plant roots become too long and obstruct the movement of the small fish, you can trim the roots slightly.
Water Replacement: To perform a water change, lift the water tank by removing the top cover. Clean the water tank, bottom cover, filer sponge, and water pump. Then, reassemble them into the device (pay attention to the orientation; the water pump connector must be securely in place, or the pump won’t work). Refill the tank with water and place the top cover with the green plants. Be careful not o spill water into the base when changing water; if any spills occur, please wipe them clean
WARM TIPS
- Please handle with care to prevent the product from falling or tipping over.
- Keep the product out of reach of children to avoid injury or damage from accidental falls.
- Use a 2A charging cable and a 5V adapter to ensure that the device has suffiient power when operating the lights, Bluetooth, and water pump simultaneously.
- Do not activate the water pump when the water tank is empty to prevent damage to the pump.
- Unplug the power cord when not in use for an extended period.
- Considering an environment perspective during transpor- tation will hurt green plants and fish for display please purchase on your own
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Multifunctional Decorative Lights
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Remote controller
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>