MacLean MCE319 Dusk Sensor Solar LED Patio Stair Light Instructions
- June 15, 2024
- MACLEAN
Table of Contents
MCE319 Dusk Sensor Solar LED Patio Stair Light
MCE319
Solar LED lights
Explanation of symbols: A1 Rated voltage A2 Class III protection: a product in
which protection against electric shock takes place thanks to supplying it
with safe low voltage, so-called SELV. A3 Dustproof product and having a level
of protection against cast water streams on the housing from any side A4
Luminaire rated power A5 Luminous fiux (lm)
A6 Maximum service life A7 Battery information A8 Battery charging time A9
Working time A10 The luminaire is adapted for indoor and outdoor installation
A11 Minimum distance from the illuminated object A12 Temperature range in
which the luminaire can work A13 The product complies with formal requirements
within the EU.
A14 Symbol informing about the requirement for selective waste collection.
This product should be returned to the collection points of waste electrical
or electronic equipment, due to the special form of processing. A15
Installation / operation / safety: Before starting work, read the instruction
manual. Before first use, check for proper mechanical fit. Perform all
installation and maintenance activities with the power supply disconnected.
The light source in the luminaire cannot be replaced. Before using the product
for the first time, remove the battery protection tab. The lighting fixture
automatically turns on after dusk. The luminaire is equipped with an internal,
replaceable battery. If it is necessary to replace it, please contact the
seller in order to select the appropriate new piece. All changes reserved. The
product should be periodically cleaned with dry cloths to allow optimal
charging of the batteries. In the case of outdoor installation, attention
should be paid to adequate insolation in order to ensure proper charging
conditions. Before the first use, leave the lamp exposed to sunlight to fully
charge the batteries. Protect against looding.
NOTE:
Do not stare into the LED light beam. The manufacturer reserves the right to
introduce design changes and improvements due to technical progress of any
products described in the manual without notice about this user. A16 Color
temperature: 4000K (neutral white) A17 Light source: LED SMD 2835.
