MacLean BV U Series Tri Proof Light Installation Guide
- July 9, 2024
- MacLean BV
Table of Contents
U Series Tri Proof Light
“`html
Specifications:
- Max Wattage: 1080 W under 220V AC
- Input Voltage: 110-220V AC
- Power Output: 30W, 40W, 50W, 60W
- Max Series Quantity: Varies based on power output and input
voltage
Product Usage Instructions:
Ceiling Installation:
-
Turn off the switch before installation.
-
Use the provided clips and stoppers for ceiling
installation. -
Tighten the screws with a screwdriver to secure the light.
Suspending Installation:
-
Use the suspension fixing screws, U-shape holders, suspension
wires, and suspension fixed bushings for suspended
installation. -
Follow the provided wiring diagram for correct
connections. -
Make sure to tighten the screws with a screwdriver for secure
installation.
Parallel Connection:
Able to be connected in series. Ensure not to exceed the maximum
wattage specified.
FAQ:
Q: Can I connect multiple lights in series?
A: Yes, you can connect the lights in series, ensuring that the
total wattage does not exceed 1080W under 220V AC.
Q: What are the differences in wiring between AU/EU and US
markets?
A: The wiring colors and connections differ between AU/EU and US
markets. Refer to the provided wiring diagrams for correct
connections based on your region.
Q: What precautions should I take when installing the
light?
A: Make sure the lamp is reliably grounded to avoid damage.
Avoid using the product in places with chemical corrosive
substances.
“`
Installation Manual of Parkade Tri-proof Light
Standard Accessories
Clips
Ceiling Installation
Stoppers
Tapping screws for chips
Machine screws for clips
Turn off the switch
OFF
Metal connectors
lamp angle can be rotated ±45°
Standard Clips
Turnable Clips
3 The final appearence
Tighten the screw with screwdriver
Able to be connected in series, the max wattage is 1080 W under 220V AC
Suspending Installation
Suspended way
9 8 7 6 5 3
4 2
Parallel Connection
Spare Parts
1 LED Tri-proof Light
1PC
2 Suspension fixing screws 2PCS
3 U-shape holders
2PCS
4 Suspension fixing nuts 2PCS
5 Suspension wires
2PCS
6 Suspension fixed bushings 2PCS
7 Self-tapping screws
2PCS
8 Panel light fixed bushings 2PCS
9 slotted plastic screws
2PCS
Wiring Diagram
Tighten the screw with screwdriver
AU/EU market:
1 Brown wire =L1 2 Green/Yellow wire = 3 Blue wire =N 4 Black wire =
L2/DIM+/DA+ 5 Gray wire= L3/DIM-/DA-
US market:
1 Black wire= L1 2 Green wire= 3 White wire= N 4 Red wire = L2/DIM+/DA+ 5
Orange wire = L3/DIM-/DA-
Sires Connection
Power(W)
30 40 50 50 60
Input Voltage(AC) Max series quantity (pcs)
110 220 110 220 110 220 110 220
110 220
19
38
14
28
10
21
10
21
9
18
Knock Holes
Lock-screw
Wiring Diagram
AU/EU market: 1 Brown wire =L1 2 Green/Yellow wire = 3 Blue wire =N 4 Black
wire = L2/DIM+/DA+ 5 Gray wire= L3/DIM-/DA-
US market: 1 Black wire= L1 2 Green wire= 3 White wire= N 4 Red wire =
L2/DIM+/DA+ 5 Orange wire = L3/DIM-/DA-
Knock holes on out caps by 90° vertical
Driverscrew Torque 2N.m Turn on the switch
CAUTION
Knock holes on out caps by 90° vertical as follow
ON
Wrong Demonstration
HT
Caution: DO NOT use this product in the following places/application
BT
1. The place has a large quantity of chemical corrosive substance, such as: chemical plant and stockyard etc.
2. The place has poor temperature conditions, the applicable operating temperature of the lamp is -20~+40°,Sharp temperature variation, which would increase the risk of damage to the lamp.
PE
3. Pls note that lamp must be reliably grounded. Make sure that your application is completely
connected to ground firstly. Otherwise, it will do heavy damage to lamp if lamp’s earth wire can
not be efficiently connectedto the ground.