MOOVE 35i Pro Wireless Headphones with Active Noise Canclling User Guide
- June 15, 2024
- moove
Table of Contents
- MOOVE 35i Pro Wireless Headphones with Active Noise Canclling User Guide
- The Active Noise Cancelling
- SPECIFICATIONS B
- CARE, MAINTENANCE, SAFETY
- Pairing your MOOVE 35i PRO by MIIEGO” wireless headphones
- Charging Your MIIEGO Headphones
- Next time charging
- Turning Your MIEEGO Headphones On and Off
- Battery status with voice prompt when headphones are turned on B
- How to activate the ANC – Active Noise Cancelling function D
- How to activate the Low Latency function
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MOOVE 35i Pro Wireless Headphones with Active Noise Canclling User Guide
- Volume Up/ Next Song Press once / Hold
- Volume Dawn / revious Song Press once / Hold O M-button Tarn headphones on / off. Ploy / pase. Answer cal, andiresct cal. ANC noise concelling / Low lotency bution 7 Srt
- LED indicator for charging/pairing 7ANC (Grean=0n)
- Charging port
- Bui-n Micraphone
The Active Noise Cancelling
(ANC) function will reduce unwanted environmental noise ond deliver a clearer
audio performance.
ANC iz mainly used for low frequency band noise. Even though environmental
noise s reduced, it may not be entirely eliminated and voice efc. can be
heard. Smarlphones may cause ANC interference/noise.
If o, move the phone away from the headphones. @ Do not press ihe headphones
or ear cushions, when ANC is on, as this may inferfers the ANC microphone and
cause high ‘beep’ noise. ® When ANC i< ON i will consume more batiery,
SPECIFICATIONS B
BT v5.3. Rechargeable 400 mivh Li-ion battery. Full charging fime: around 2-3 hours. Frequency range: 2.402-2.480GHz. Freq. Respanse: 20Hz 20KHz.
CARE, MAINTENANCE, SAFETY
other activity where failure to hear our surroundings could be dangerous. Use of these headphanes at excessive volumes may cause permanent hearing domage. Always turn the volume down before use. Keep out of reach from children and animals. Avoid direct sunlight. Product storage and working temperatures: from 5 degrees to +45 degrees. Do not dispose he batiery in fire, as it may couse on explosion. Any modifications 1o the device will void the ser worranty and may have consequences for your safely.
Pairing your MOOVE 35i PRO by MIIEGO” wireless headphones
- Make sure your MOOVE 38i PROS are charged and turned OFF.
- .Press and hold the M- butlon on the headphones for
- seconds until the indicator fight flashes Red and Blus allernatively (pairing mode) 3 Activate BT on your phone o
Charging Your MIIEGO Headphones
When the Red light 1= on, the headphones are charging. When fhe fied light is off, the headphones are fully charged. Full charging time is around 2.3 hours.
Next time charging
When you hear a warning tone of “battery low” every 180 seconds and the red light blinks, the battery status Is low ond needs charging.
Turning Your MIEEGO Headphones On and Off
ON: Press the M-Button for 3 seconds until the indicator light turns Biue for 1 second. OFF:Prass the M-Button uniil ihe Indicafor light turns Red for 2 secands,
Battery status with voice prompt when headphones are turned on B
Bottery high: 71-100% Boltery medium: 30-70% Battery low: 0-29%
How to activate the ANC – Active Noise Cancelling function D
Double-press the M-Bufton to aclivate Noise Canceling On and Off When fhe ANC is ON fhe green indicotor ligh 1s ON.
How to activate the Low Latency function
Triple-press the M-Bulton o activate Low Latency On and Off When fhe Low
Lafency is ON, you will hear o fone.
Make sure you delete “MOOVE 351 PRO ” from your phones BT-device settings
before. resetling. 1. When power s off, press and hold the M-butten for 5
seconds until the ight flashes blve and red. 2.Press and hold both +/- buttons
simultaneausly for 10 seconds until you see the red light flashing 3 fimes.
The headphones will then power OFF oufomaticallyMulti-point connection: 1.
Connect your FIRST device as normal. Then, fur off Blustooth in settings on
that device. The headphones will then aufomaticaly enter pairing mode again.
2. Connect your SECOND device as narmal to the headphanes. 3. Then activate
your FIRST device again and turn on Bluetooth. Re-connect/pair fheheadphones
1o that device again Activate Siri on i0S-devics Access Sir by pressing the
M-button 4 times.
Only listen la music in a moderale volume and rentiCierdl e periods or 1 ime. Excessive ex pot.y re o high sound levels can lead to noi se-induced hearing lass.
T his device contains 0 litbium accumulator. imprpriir isisre con .coiiie
ioyerhegitingi grri:i fire, Cali’lornia Residents:
WARNING: This producl cant cunt chernicol5 known I o the State al Cali larnia
lb cause cancer and bir-lh delecls or olher reproductive harm.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>