KLEAH KN-L6230LA Rechargeable LED Lantern Instruction Manual

KLEAH KN-L6230LA Rechargeable LED Lantern

Product Overview

1. HANDLE
2. LED
3. SWITCH KNOB
4. MIRCO USB CHARGE
5. CHARGING INDICATOR

Thank you for using our product, please read the instruction manual carefully before initial use.

IMPORTANT NOTICE

• This appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

1. Fully charge the product before use. Read “HOW TO CHARGE”.
2. Switch off the product during storage. Periodically charge the product at least 4 hours every three months when stored.
3. Keep out of water or rain for proper use. The perfect working temperature is between  0 C and 40°C. Once the product is out of operation, do not open or repair unless a qualified person.

HOW TO OPERATE

1. See drawing 1,turn the switch according to the arrow, lantern will be turned on and light become strong progressively.
2. Turn the switch converse to the arrow, the light will become weak progressively until the lantern being turned off.

HOW TO CHARGE

1. Make sure the power supply is consistent with the rating of product before charging.
2. Connect the power supply, the charge indicator lights up to show the product is under charging. The charging indicater will be in red color during charging, and it will turn to green when fully charged.Switch off the product during charging.
3. The product may become slightly warm during charging.
4. With overcharging protection.

Correct Disposal of this product

This marking indicates that this product should not be disposed of with other household wastes.Top prevent possible harm to the environment or h human health from uncontrol ledwaste disposal,recycle leit responsible to promoting tai able reuseofmaterial resources To return used device, please nand collection systems the retailer where the product was purchased

TECHNICAL DATA

1. Power source: DC 5V
2. Battery: 3.7V 1200 mAh battery
3. Light source : 30PCS 0.5W LED
4. Charge time: 2-4hrs
5. Duration: 1.5-50hrs
6. Dimension: 108105181mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>