solarcentre SC2129 Solar Pir Path Light User Guide
- June 3, 2024
- solarcentre
Table of Contents
solarcentre SC2129 Solar Pir Path Light
instructions
Important notes
Always take care when installing your light. If you are at all unsure. please contact your retailer or a professional trades person for advice.
Installation
Remove all packaging and put to one side. Please carefully consider where you wish to install your light before making alterations to your property. It’s particularly important that the solar panel receives as much sunlight as possible. Ensure that it is not obstructed by buildings. fences,. trees, sheds, etc, or the shadows that these create. If the solar panel is installed ina poor location, it may not perform to the best of its ability.
To maximise the battery capaity, the lights should be charged in direct sunlight for at least 12-24 hours before being used for the first time The lights will turn ON/OFF automatically when left in the on position. Please note it is completely normal for the lights to come on at different times as it depends on how fast they charge in their location. Please note your light will not turn on if it is daylight, to test your light is working take it into a dark room or use a cloth to cover the solar panel.
Assembly
You will locate the on/off switch on the underside of the light head Assemble the poles together, choose your desired height and connect to the stake mount provided. Place your Path Light into soft ground, ensuring suitable daylight exposure to charge the solar panel.
Troubleshooting
Please ensure that there are no nearby light sources shining on the solar panel after dark. These could be bright indoor/outdoor lights from your property or neighbours, or streetlights. Ifyou are unsure, take the light inside and test it in a dark room. If you are encountering any problems with your Neptune Solar PIR Path Light often you can resolve this yourself by following our troubleshooting guide. If the light has it’s solar panel in a poor location it will struggle to work, but that doesn’t mean there is a fault with the unit. Please remember that the light will arive with some charge and willikely work for a few days even if the solar panel is poorly located. Please try the troubleshooting tips below before contacting your retailer.
Recharge Procedure
- Double check the location of your solar panel to ensure it is in a clear location and as South facing as possible.
- Turn the light off at the switch and leave it to recharge for 3-5 days ensuring one sunny day has passed.
- After 3-5 days return to thelight and turn it back on at the switch.
- If your light still does not illuminate after dark, please contact your retailer
Maintenance
Clean the surface of the solar panel and light lens with a soft, slightly moistened cloth. Do not use corrosive cleansing agents or chemical solutions as these may damage surfaces and impair operation. Keep the solar panel free of dirt, debris and snow.
Safety Instructions
The Solar Centre assumes no liability for any damageresulting from the use of this product, nor do we assume liability for any damage to property or personal injury caused by improper use or failure to observe these instructions. Unauthorised conversion and/or modification of the unit may be dangerous and will invalidate your warranty. To avoid damage to sight, do not look directly at the light source. This device is not a toy and should be kept out of reach of children. Do not submerge the device in water or expose it to extreme temperatures (less than -25°C or higher than 50°C).
For customer support please contact:
The Solar Centre Ltd 44-46 Coldharbour Lane Harpenden
T: 01727 743200
Hertfordshire
W: solarcentre.co.uk
AL5 4UN
E: [email protected]