befree sound BFS-9160 Portable Bluetooth 12 Inch Double Subwoofer Speaker Instruction Manual
- June 15, 2024
- BeFree Sound
Table of Contents
befree sound BFS-9160 Portable Bluetooth 12 Inch Double Subwoofer Speaker
Product Information
Specifications
- Product Name: BFS-9160 Portable Bluetooth 12-inch Double Subwoofer Speaker System
- Bluetooth Version: 2.1+EDR
- Power Output: 100W
- Frequency Response: 40Hz – 20kHz
- Signal to Noise Ratio: ≥70dB
- Input: Bluetooth, USB, SD, FM Radio, AUX
- Power Supply: AC 100-240V/50-60Hz
Package Content:
- Speaker
- Microphone
- Remote Control
- Power Cable
Product Usage Instructions
Rear Control Panel:
- Power On/Off Switch
- AUX Input
- Mic Volume Control
- Guitar Input
- Bass Control
- Treble Control
- Echo Control
- Mic Priority Button
- USB Input
- SD Card Slot
- FM Radio Scan/Reset Button
- FM Radio Frequency Control
- LED Display
- Master Volume Control
- Mic Input Jack
- Audio Input Jack (AUX)
- Guitar Volume Control
- Power Indicator
Remote Control:
- Mute button
- Shuffle music order being played
- Record
- Volume up
- Previous Song
- Play, Pause, and Scan
- Volume Down
- Repeat Song
- Record Play (replay the recorded music)
- Next Song
- EQ (pre-set setting)
- 0-9 Selection to choose songs
Bluetooth Function:
To use the Bluetooth function, follow these steps:
- Turn on the power.
- Switch the input to Bluetooth.
- The display will show “BLUE” and play a sound.
- Open the Bluetooth device to connect and turn on the Bluetooth switch.
- Find “bfs-9160”, “beFree Sound”, or “beFree” to connect.
- There will be a sound prompt after the connection is successful.
Important Safeguards:
- Read these instructions thoroughly before using this unit and keep them for future reference.
- Follow all instructions.
- To prevent fire or electric shock, do not expose this unit to rain or moisture. Do not store or operate this product near any liquids.
- Clean only with a dry cloth.
- Do not store or operate this product near any heat sources such as radiators, heaters, stoves, or other apparatuses (including amplifiers) that produce heat.
- Unplug the unit during lightning storms or when unused for long periods of time.
- When wiring this unit and all other equipment used in connection to this unit, make sure that all of your equipment is turned OFF.
- Inspect your unit for any damage before using it. Do not operate the appliance if it has a damaged cord or plug, or after it has malfunctioned or has been damaged in any manner.
For Warranty Information and Feedback:
Please visit www.befreesound.com or contact
Support & Warranty at 424-543-1628.
FAQ:
-
Q: How do I connect my device to the speaker via Bluetooth?
A: To connect your device via Bluetooth, turn on the speaker and switch the input to Bluetooth. Then, open the Bluetooth settings on your device and search for “bfs-9160”, “beFree Sound”, or “beFree” to connect. Once connected, you will hear a sound prompt. -
Q: Can I use the speaker without Bluetooth?
A: Yes, you can use the speaker with other inputs such as USB, SD card, AUX, or FM radio. Simply switch the input to the desired option and connect your device accordingly. -
Q: How do I adjust the volume of the microphone?
A: The microphone volume can be adjusted using the dedicated mic volume control on the rear control panel of the speaker. Use this control to increase or decrease the microphone volume as needed. -
Q: What is the power output of the speaker?
A: The speaker has a power output of 100W, providing loud and clear sound for your audio needs.
Thank you for purchasing our product. To be sure you take maximum advantage of all the beFree speaker has to offer, read these instructions carefully and use the features properly. Be sure to keep this manual for future reference should any questions or problems arise.
PACKAGE CONTENT
Please take a moment to make sure that you have everything in the list below.
REAR CONTROL PANEL
- Antenna
- TF Card/USB/SDMMC Card input
- Play, Pause, Rewind, Fast Forward, Shuffle, Repeat, Record Features options for music
- AUX Input/Output
- Mic. PRI
- EXT DC 12V input
- Light switch to light up speakers
- Fully charged, Low Charge light indicating the battery power
- Power On/Off button
- AC Input
- Microphone Input
- Microphone Volume Level
- Echo Volume Control
- Guitar input Volume Control
- Treble Volume Control
- Bass Volume Control
- Main Volume Control
- Guitar Input Jack
REMOTE CONTROL
- Mute button
- Shuffle music order being played
- Record
- Volume up
- Previous Song
- Play, Pause, and Scan
- Volume Down
- Repeat Song
- Record Play (replay the recorded music)
- Next Song
- EQ (pre-set setting
- 0-9 Selection to choose songs
BLUETOOTH FUNCTION
Turn on the power, switch the input to Bluetooth, and the display will display “BLUE” and play a sound. Open the Bluetooth device to connect and turn on the Bluetooth switch and find “ bfs-9160”, “beFree Sound” or “beFree” to connect. There will be a sound prompt after the connection is successful.
IMPORTANT SAFEGUARDS
- Read these instructions thoroughly before using this unit and keep them for future reference.
- Follow all instructions.
- To prevent fire or electric shock, do not expose this unit to rain or moisture. Do not store or operate this product near any liquids.
- Clean only with a dry cloth.
- Do not store or operate this product near any heat sources such as radiators, heaters, stoves, or other apparatuses (including amplifiers) that produce heat.
- Unplug the unit during lightning storms or when unused for long periods.
- When wiring this unit and all other equipment used in connection to this unit, make sure that all of your equipment is turned OFF.
- Inspect your unit for any damage before using it. Do not operate the appliance if it has a damaged cord or plug, or after it has malfunctioned or has been damaged in any manner.
WARRANTY
FOR WARRANTY INFORMATION AND FEEDBACK, PLEASE VISIT WWW.BEFREESOUND.COM Support & Warranty 424-543-1628.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>