beFree Sound BFS-6700 Party Lights Triple 10 Inch Subwoofers Instruction Manual

beFree Sound BFS-6700 Party Lights Triple 10 Inch Subwoofers

Front Panel Reference Guide

1. Battery Charge Indicator Light
2. Light which turns on if the battery is running low on charge. If so, the speaker needs to be plugged in an electrical outlet for the battery to be recharged
3. MIC VOL
4. Knob which controls the volume for the Microphone
5. ECHO VOL
6. Knob which controls the sound echo for the Microphone
7. MIC/PRIO
8. The button which switched from wireless microphone to the wired Microphone
9. Previous Song Selector
10. The button which chooses the previous song on a playlist
11. Play and Pause
12. A button used to play and pause the music from various source connected to the machine
13. Next Song Selector
14. The button which chooses the next song on a playlist
15. MODE
16. The button which changes between the sources connected (Bluetooth, USB, Aux) to the device
17. Bluetooth, USB, Aux light indicator
18.  Indicates which device in connected based on the light flashing speed.
19. VOLUME
20. Knob which controls the increase and decrease of volume
21. L/RIGHT EQUALIZER
22. Equalizer control for sound control
23. MIC INPUT
24. Wired microphone input
25. DC12V INPUT
26. Optional charging input
27. TF/USB CARD
28. Input option for USB or Mini SD Card
29. AUDIO INPUT
30. Wiled audio input option

Rear Panel Reference Guide

1. AC INPUT
   • Power cord input
2. POWER
   • Device power button
3. LED POWER
   • Light power button

Remote Control Reference Guide

1. Power Button
2. MODE: Changes Play Source
3. Previous Song Selector
4. Play and Pause
5. Next Song Selector
6. RECOR: Record button
7. VOL+: Increase Volume
8. REPLAY: Playback
9. Mute Button
10. CH-/EQ: Pre-set equalizer setting(in USB,Mini SD mode only)
11. RPT/DEL
12. 0:Digital input selection (in USB,Mini SD mode only)
13. INT/ALL/SCAN: in USB,Mini SD mode only
14. VOL-: Decrease Volume

Included in the package:

(Batteries not included)
Limited Warranty Information http://www.befreesound.com [email protected]

To pair with a Bluetooth device, follow these steps:

1. With the Bluetooth device and the BeFree speaker both turned on, press and hold the Bluetooth button on the speaker for three seconds to make the speaker discoverable. The Bluetooth indicator light will blink to show the speaker is in discoverable mode
2. Set your Bluetooth device to “Discoverable.” This will allow your device to discover the BeFree speaker
3. On your device, locate the Bluetooth device list. Select “Befreesound” from the list
4. If your device asks for a passkey, enter digits 0000 and press OK. Some devices also ask you to accept the connection. Your Bluetooth device indicates when pairing is complete. The Befree speaker indicates pairing is complete when the Bluetooth indicator stops blinking on and off and remains on.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>