beFree Sound BFS-400 5.1 Channel Surround Sound BT Speaker System Instruction Manual
- June 13, 2024
- BeFree Sound
Table of Contents
beFree Sound BFS-400 Blue 5.1 Channel Surround Sound BT
Spactar;Systom 
Thank you for choosing BeFree Sound Please read this manual carefully and keep
it for future reference
NOTE: This unit is set on 5.1 mode upon startup, please press the5.1/2.1
button for 2.1 surrond sound
Usage:
Specification:
Frequency Response:40Hz-20KHz
“Separation 5048
“Speaker: 4425 x5
Caution.
- D0 not expose 1o dripping or splashing
- D0 not place any objects fillad with water over the apparatus,
- D0 not lock the ventilation holes,
- Forindoor use only
- When using high output signal don’turn the volume to maximum 10 avoid distortion.
Inside Package:
| Subwoofer Speaker | 1 pc |
|---|---|
| Satite Speakar | 5pcs |
| Radio Cable | 4 pcs |
| User Manual | 1 pc |
| Ramota Control | 1pc |
| FHAntenn | 1 pc |
How to use the BT:
- select the audio input to BT status
- search BT device with the name “BFS-400” on the device you want to pair
- connect the BT
- if your BT devise is below the 2.0 version, input password “0000” when connecting.
Frontpanel
Front panel
INPUT Input function key, switch among AUX/USB/SD/FM mode; Select Standby
function by pressing this button for 3 seconds when the unit is in
AUX/USB/SD/FM mode.
VOLUME-/+ Rotate to the left to lower the volume Rotate to the right to lower
the volume
5.1/2.1 5.1/2.1 function key.
AUTO USB/SDpause/Play function key. Automatically searches FM Stations when in
FM Mode
CH- Previous song in USB/SD mode.
Previous saved channel in FM mode.
CH+ Next song in USB/SD mode. Next saved channel in FM mode
. U DISK USB disk slot SD/MMC CARD SD / MMC card slot
System connection diagram
SPEAKER TERMINALS
SPEAKER TERMINALS Connect front speakers, a center speaker,surround speakers
to 5.1 speaker output terminals.
-The front speaker cords to the FRONT SPEAKERS terminals
-The center speaker cords to the CENTER SPERKERS terminals -The surround speaker cords to the SURROUND SPEAKER terminals
NOTE: *Do not leave objects generating magnetism near the speakers.
Connecting equipment
Jacks and plugs of the connecting cord are color-coded as follows: Red jacks
and plugs: For the left channel of audio signals
NOTE: Insert the plugs fully into the jacks. Loose connections may
produce a humming sound or other noise interference.
Important: First, connect the speakers and all other external equipment,
and finally connect the AC power cord
How to use the remote control
FLERSE NOTE. i 4 tmois coil 51 fncioning, peiss eplacoe btteries.
Positioning the speakers
a Sub-woofer Place the sub-woofer any place on the floor (There is no
directional requirement for the Bass effect)
b Front Speakers
c Surround Speakers Place the surround speakers directly to the side behind
the listening area Align them horizontally, about 1 meter above ear level
d Center Speakers Position in the center of the two front speakers in addition
position on or below the TV set, if connecting a TV set to the unit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>