HEALTH LINE 16005F-B-SEAT-NEW 3 in 1 Folding Walker User Manual
- June 15, 2024
- HEALTH LINE
Table of Contents
HEALTH LINE 16005F-B-SEAT-NEW 3 in 1 Folding Walker
Product Usage Instructions
Before Assembly
- Check the Parts List carefully and remove contents from carton. Verify that all the parts are present.
- If any parts are missing or damaged, contact the customer service immediately.
Step 1:
Take out the Right Main Frame (Part# B) and press the push pin to insert it into the Left Main Frame (Part# A).
Step 2:
After adjusting to the appropriate width, use Screw (Part# G) to secure the frames on the back.
Step 3:
Insert the Connecting Tubes (Part# C).
Step 4:
Install the Rear Leg with Rubber (Part# D) and Front Leg with Wheel (Part# E) as shown. Make sure the wheels are facing out and adjust all four legs to the same height.
Step 5:
Finally, install the Seat (Part# F) to the frame.
Maintenance
- Always keep the rubber discs clear of oil and dust.
- Clean the rubber discs with standard household cleaning agents.
- Never expose the rubber discs to sunlight for long periods as it may cause loss of elasticity.
- Check the rubber discs for possible deterioration and replace them immediately if damaged.
- Regularly check and tighten loose screws and components.
Additional Precautions
- Make sure the height adjusting snap buttons fully protrude through the same respective hole of each leg extension to ensure secure locking and even height.
- Ensure all thumb screws are tightened.
- Check the rubber tips and wheels on the leg extensions for rips, wear, or missing parts. Replace any damaged parts immediately.
- All four leg extensions must touch the floor simultaneously at all times.
FAQs
Q: What should I do if some parts are missing or damaged?
A: Contact our customer service immediately with the order number, part number, quantity, and pictures or video clips (if applicable) to request replacement parts.
Q: How should I clean the rubber discs?
A: Clean the rubber discs with standard household cleaning agents, ensuring they are clear of oil and dust.
Q: Can I expose the rubber discs to sunlight for long periods?
A: No, exposing the rubber discs to sunlight for long periods can cause loss of elasticity. Avoid prolonged exposure to sunlight.
Q: How often should I check for loose screws and components?
A: Regularly check for loose screws and components. If they are loose, tighten them in a timely manner.
Q: What should I do if the leg extensions are not securely locked in position?
A: Make sure that the height adjusting snap buttons fully protrude through the same respective hole of each leg extension to ensure secure locking and an even height.
Q: What should I do if the rubber tips or wheels on the leg extensions are damaged?
A: Immediately replace any damaged rubber tips or wheels on the leg extensions.
Q: Should all four leg extensions touch the floor simultaneously?
A: Yes, all four leg extensions must touch the floor simultaneously at all times.
Parts List
product accessories
The product accessories are as follows:
Installation Instructions
Before Assembly
- Please check the Parts List carefully and remove contents from carton. And then verify that all the parts are present. When missing parts or some parts are damaged, please contact us immediately.
- We provide replacement parts to our customers if you need any replace ment parts. Please provide the order number, part number, quantity, and pictures or video clips (if applicable) so that you can get what you need as soon as possible.
Assembly Instructions
Step 1. Take out the Right Main Frame (Part# B), and press the push pin to insert it into the Left Main Frame (Part# A) .
Step 2. After adjusting to the appropriate width, continue to use Screw (Part# G) to secure the frames on the back.
Step 3. Insert the Connecting Tubes (Part# C) .
Step 4: Install the Rear Leg with Rubber (Part# D) and Front Leg with
Wheel (Part# E) as shown.
Note: Make sure the wheels are facing out and adjust four legs to the
same height when installing Step 5. Finally, install the Seat (Part# F) to
the frame.
Replacement Rubber Feet
Maintenance
- Always keep the rubber discs clear of oil and dust.
- Clean the rubber discs with standard household cleaning agents.
- Never expose the rubber discs to sunlight for long periods otherwise they will quickly lose their elasticity.
- Check the rubber discs for possible deterioration. If the suction cups show damage, replace immediately.
- Please check whether screws and components are loose regularly. If they are loose, tighten them in time
Additional Precautions
- Inspect all parts for shipping damage before assembly. If there is shipping damage – DO NOT USE. Contact dealer/carrier for further instructions.
- Make certain that the height adjusting snap buttons fully protrude through the same respective hole of each leg extension. This will ensure that the leg extensions are securely locked in position and an even height is achieved.
- Ensure All thumb screws are tightened.
- Check the rubber tips and wheels on the leg extensions for rips, wear or if they are missing. Immediately replace any or all if any of these imperfect tions exist.
- All four leg extensions MUST touch the floor simultaneously at all times.
Warranty
One Year Warranty
Our brand product is warranted to be free of defects in materials and workmanship for One Year for the original purchaser. This device was built to exacting standards and carefully inspected prior to shipment. This One Year Warranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the consumer of dependable service. In the event of a defect covered by this warranty, we will, at our option, repair or replace the device.
This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear. The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips, which are subject to normal wear and need periodic replacement.
If you have a question about device or this warranty, please contact us.