bluelign PWC 12 Wireless Charger Instruction Manual

bluelign PWC 12 Wireless Charger

SAFETY INFORMATION

To prevent injury to yourself and other or damage to your device, read the safety information about your device before using the device. GlobalSign International Trading company connot be held responsible for any injury or property damage cause by failure to comply wtth the sole cautions and regulations.

1. Please do not expose this device to moisture or heat sources.
2.  this is not a toy, not suitable for children under the age of 7.
3.  Do not use damaged power cords or plugs, or loose electrical sockets.
4. Do not touch the power cord with wet hand or disconnect the charger by pulling the cord.
5. Do not bend or damage the power cord.
6. Do not store your device with metal objects, such as coins, keys and necklaces. Your device may overheat.
7. Do not use your device or applications for a while if the device is overheated.
8. Prolonged exposure of your skin to an overheated device may cause low-temperature burn symptoms,such as red spots and pigmentation.
9. Do not store your device neat or in heaters, microwaves, hot cooking equipment, or high-pressure containers. Your device may overheat and cause a fire.
10. Do not drop or cause an impact to the charger or the device.
    •  Storeyour device only on flat surfaces
    • If your device falls, it may be damaged.
11. Do notbite or suckthe device
    • Doing so may damage the device or cause an explosion.
    •  If children use the device, make sure that they use the device proper.
12.  The device must be installed and used in a manner that keeps the device at lea l Dem from users and binders.
13.  Keep your device dry
    • Humidity and liquids may damage the parts of electronic circuits in your device.
    • If your device is wet, dry the device with a towel and take it to a service center.
14.  Do not disassemble, modify or repair your device
    • Your device may malfunction and your risk of electric shock is increased.
    • Any changes or modifications to your device con void your manufacturer’s warranty. lf your device needs servicing, take your device to a service center.

USING THE WIRElfSS CHARGER

1. Make sure that the charging oreo(see picture)is in the same position os the receiver of the device to be charged.
2.  Connect the USB port to a power source.
3. Moke sure your phone is compatible for wireless. scourging.
4. Place your wireless charging device on the wireless charging oreoG)

Note:

• Some phone coses may block the wirel”‘ charging.
• Do not place other materials, like metal objects, magnets, and magnetic stripe cords, between the mobile device ond the wire”5chorger pod.
• Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
• When the mobile device is not placed on the charging area accurately, your mobile device may not charge proper.

Wa1Tonty:
GlobalSign international Trading provides a warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 24 months, starting from the date on which the appliance is sold to the end user.

• The warranty on cover, defects in material or workmanship.
• The repairs under warranty moy only be carried out by an authorized service center. When making o cloim under the warranty, the original bill of purchase (with purchase dote) must be submitted.
• The warranty will not opply in cases of:
  1. Normal wear and tear
  2. Incorrect use, e.g., overloading of the appliance, use of non-approved accessories
  3.  Use of force, damage caused by external influences
  4. Damage caused by non-observance of the user manual, e.g., connection to an unsuitable main supply or non-compliance with the installation instructions
  5. Partially or completely dismantled appliances
  6.  The accessories ore not covered by the terms of the warranty because they ore subject to wear.

PRODUCT OVERVIEW

1. Wireless charging area
2. Charging Area
3. Indicator light indicator light

Packaging includes

1. Roundwireless charger
2. l 00 cm Re<ycled TPE Micro USB cable
3. instruction Mongol

Specification

• Input: 5V-2A
• Output:5V-IA 9V-l.lA,Max. lOW
• Operational temperature: -10 – 6D”C
• Maximum radio frequency power: 28.31 dBuA/m
• Frequency band: ll0-205kHz
• Charging type:Wirel”5chorging
• Product weight:38g
• Product dimensions: 075 x 10mm

Mobile device compatibUity
This product supports all devices that have a wireless receiver that enables wireless charging on a charging pad.

This marking indicates that this product should not be disposed of with another household was les throughout the EU. To prevent possible harm to the environment or humonheolth from – uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Declaration with of all the Conformity. applicable Products Community marked with regulations this of symbol the European Economic Area.

The packaging can be reused or recycled. Please dispose properly of any packaging material no longer required. If you notice any transport damage during unpacking, please contact your dealer without delay.

If you need more information or support, please contact us via: www.bluehgn.com Globalign international trading declares that the radio equipment type PWCl 2 Bluelign wireless charger is in compliance with Directive 2014/53/EU RED, 2011/65/EU RoHS, 2015/863/EU Ro HS, SVHC 1907 /2006 REACH. The lull and mo recent text of the EU declaration of conformity is available ot the following internet addr”5:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>