bluelign PWC12 Wireless Charger Instruction Manual

bluelign PWC 12 Wireless Charger

SAFETY INFORMATION

To prevent injury to yourself and other or damage to your device, read the safety information about your device before using the device. Globalign International Trading company connot be held responsible for any injury or property damage cause by failure to comply wtth the solely coulions and regulations.

1. Please do not expose this device to moisture or heat sources.
2.  lhis is not a toy, not suitable for children under the age of 7.
3.  Do not use damaged power cords or plugs, or loose electrical sockets.
4. Do not touch the power cord with wet hand or disconnect the charger by pulling the cord.
5. Do notbend or damage the power cord.
6. Do not store your device with metal objects, such as coins, keys and necklaces. Your device may overheat.
7. Do not use your device or applications for a while if the device is overheated.
8. Prolonged exposure of your skin to on overheated device may cause low temperature burn symptoms,such as red spotsand pigmentation.
9. Do not store your device neat or in heaters, microwaves, hot cooking equipment, or high pressure containers. Your device may overheat and cause a fire.
10. Do not drop or cause an impact to the charger or the device.
    •  Storeyour device only on flat surfaces
    • If your device falls, it may be damaged.
11. Do notbite or suckthe device
    • Doing so may damage the device or cause an explosion.
    •  If children use the device, make sure that they use the device proper.
12.  The device must be installed and used in a manner that keeps the device at lea l Dem fromusersand bnders.
13.  Keep your device dry
    • Humidity and liquids may damage the parts of electronic circuits in your device.
    • If your device is wet, dry the device with a towel and take it to a service center.
14.  Do not disossemble, modify or repair your device
    • Your device may malfunction and your risk of electric shock is increased.
    • Any changes or modifications to your device con void your manufacturer’s warranty. lf your device needs servicing, takeyour device to a service center.

USING THE WIRElfSS CHARGER

1. Moke sure thatthe chargingoreo(see picture)is in the same position os the receiver of the device to be chorged.
2.  Connect the USB port to a power source.
3. Moke sure yourphoneis compatible for wireles.schorging.
4. Place your wireless charging device on the wireless charging oreoG)

Note:

• Some phone coses may block the wirel”‘ charging.
• Do not place other materials, like metal objects, magnets, and magnetic stripe cords, between the mobile device ond the wirel”5chorger pod.
• Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
• When the mobile device is not placed on the charging area accurately, your mobile device moy not chorge proper.

Wa1Tonty:
Globalign lnternationol Trading provides warranty in occordonce with the legislation of the customer’s own country of residence, with a minimum of 24 months, starting from the dote on whichthe opplionce is sold to the end user.

• The worronty on cover, defects in moteriol or workmanship.
• The repairs under warranty moy only be carried out by on authorized service center. When making o cloim under the warranty, the original bill of purchase (wtth purchose dote) must be submitted.
• The worronty will not opply in casesof:
  1. Normal wear and tear
  2. Incorrect use, e.g., overloading of the appliance, use of non-approved acceS’SOries
  3.  Use of force, domoge coused by external influences
  4. Damage caused by non-observance of the user manual, e.g., connection to an unsuitable main supply or non-compliance with the installation instructions
  5. Partiolly or completelydismantled applionces
  6.  The accessories ore not covered by the terms of the warranty because they ore subject to wear.

PRODUCT OVERVIEW

1. Wireless charging area
2. Charging Area
3. Indicator light lndimtor light

Packaging indudes:

1. Roundwireless charger
2. l 00 cm Re<ycled TPE Micro USB cable
3. lnstruction Monuol

Specification:

• Input: 5V-2A
• Output:5V-IA 9V-l.lA,Max. lOW
• Operational temperature: -10 – 6D”C
• Maximum radio frequency power: 28.31 dBuA/m
• Frequency band: ll0-205kHz
• Charging type:Wirel”5chorging
• Product weight:38g
• Product dimensions: 075 x 10mm

Mobile device compatibUity
This product supports all devices that hove a wireless receiver that enables wireless charging on a charging pad.

This marking indicotes thatthis productshould not be disposed with other household waslesthroughoutthe EU. To prevent possible horm to the environment or humonheolthfrom – uncontrolled waste disposal, recycle ii responsibly to promote the sustoinoble reuse of moteriol resources.Toreturn yourused device, please use the return and collection systems or contact the retailer where the product was purchosed. They con take this product for environmentol sofe recycling.

Declaration with of all the Conformity. opplicoble Products Community marked with regulations this of symbol the European Economic Area.

The packaging can be reused or recycled. Please dispose properly of any packaging material no longer required. If you notice any lransport domageduring unpacking,pleose conlactyour deoler without delay.

If you need more information or support, please contact us via: www.bluehgn.com Globalign international trading declares that the radio equipment type PWCl 2 Bluelign wireless charger is in compliance wtth Directive 2014/53/EU RED, 2011/65/EU RoHS, 2015/863/EU Ro HS, SVHC 1907 /2006 REACH. The lull and mo recent text of the EU declaration of conformity is available ot the following internet addr”5:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>