SONOS S44 Move 2 Bluetooth And Wi-Fi Portable Home Speaker User Manual

SONOS S44 Move 2 Bluetooth And Wi-Fi Portable Home Speaker

Specifications

• Durable, battery-powered smart speaker
• Rechargeable battery lasts up to 22 hours
• Weatherproof design
• Control options: Sonos S2 app, touch controls, voice
• Compatible with other Sonos speakers for multiroom listening

Product Usage Instructions

Controls and Lights

Volume Control:

• Slide right or tap “+” to increase volume
• Slide left or tap “-” to decrease volume
• Press and hold “+” or “-” to quickly change the volume

Play/Pause:
– Press once to play or pause audio

Next/Previous:

• Press “>” to skip to the next song
• Press “<” to go to the previous song
  Note: Skipping forward or backward is not available when listening to a radio station

Microphone:

• Toggle to turn all product microphones on or off
• When off, microphone-enabled features like Trueplay and voice services are unavailable
• When on, microphone-enabled features are available (voice services require the voice services indicator light to be on)
  Note: Both the microphone switch and the voice services indicator light must be on to use voice services

Status Light:

• Displays the product’s connection to WiFi or Bluetooth
• Indicates when the volume is muted
• Signals errors

Battery Light:

• Blinking orange indicates low battery
• Solid orange when charging (may stay on for several minutes depending on battery level)
• Battery Saver: Move 2 can be set to power off automatically instead of going to sleep to save battery life
  Note: Remaining battery life is always visible in the Sonos app

Connector Panel

Power Button:

• Press to power on
• Short press to put to sleep
• Long press (5 seconds) to power off
  Note: Move 2 goes to sleep when off the charging base to save battery, press the power button to wake it up

Handle:

• Allows for easy lifting and carrying

Bluetooth Button:

• Press and hold to pair a new device
• Press once to reconnect

USB-C Port:

• Power: Use a compatible USB-PD charger for charging Move 2 on the go or charge a different device (7.5W output)
• Ethernet: Use the Sonos Combo Adapter and an Ethernet cable to connect Move 2 directly to your router if you want to hardwire your speaker (helpful if your WiFi is unstable)
• Line-in: Use either the Sonos Line-In Adapter or Combo Adapter to connect your turntable, CD player, or other device

FAQ

Q: How long does the battery of Move 2 last?

A: The rechargeable battery of Move 2 lasts up to 22 hours.

Q: How can I recharge Move 2?

A: Move 2 can be recharged by setting it on the charging base. Alternatively, you can use a compatible USB-PD charger (sold separately) for power on the go.

Q: Can I use Move 2 outdoors?

A: Yes, Move 2 has a weatherproof design and is ideal for outdoor use such as barbecues and pool parties.

Q: How can I control Move 2?

A: Move 2 can be controlled using the Sonos S2 app, the touch controls on the speaker, or your voice.

Q: Can I connect Move 2 with other Sonos speakers?

A: Yes, Move 2 is compatible with all your other Sonos speakers for multiroom listening.

Overview

Move 2 is the durable, battery-powered smart speaker for indoor and outdoor listening

• Rechargeable battery lasts up to 22 hours. Easily recharge by setting Move 2 on the charging base. For power on the go, use a compatible USB-PD charger (sold separately).
• Weatherproof design is ideal for barbecues, pool parties, and more.
• Stream content over WiFi and Bluetooth®.
• Freedom of control using the Sonos S2 app, the touch controls on the speaker, or your voice.
• Compatible with all your other Sonos speakers for multi-room listening.
• See Setup when you’re ready to add Move 2 to your Sonos System.

Controls and lights

Note: If you don’t want to allow playback or volume adjustments using the speaker touch controls, you can disable them in the room’s settings.

Connector panel

1. Power button
   Press to power on, short press to put to sleep, long press (5 seconds) to power off.
   If Move 2 is off the charging base, it goes to sleep to save battery when you’re not using it. Just press the power button to wake it up.

2. Handle
   Allows for easy lifting and carrying so you can take the speaker wherever you go.

3. Bluetooth button

   • Press and hold to pair a new device.
   • Press once to reconnect.

4. USB-C port

   • Power: Use a compatible USB-PD charger for charging Move 2 on the go, or charge a different device (7.5W output).
   • Ethernet: Use the Sonos Combo Adapter and an Ethernet cable to connect Move 2 directly to your router if you want to hardwire your speaker (helpful if your WiFi is unstable).
   • Line-in: Use either the Sonos Line-In Adapter or Combo Adapter to connect your turntable, CD player, or other device.

5. Charging base (included)
   Set Move 2 on the charging base for easy recharging.
   Use only with the included power supply (using a third-party power cord will void your warranty).

Select a location

You can put your speaker just about anywhere. For maximum performance, here’s a few guidelines:

• Move 2 sounds great even when placed next to a wall or on a shelf. For best performance, leave at least 1″ (2.5cm) space around the back of the speaker.
• It’s ultra durable. With a tough outer shell and IP54 rating, Sonos Move 2 is built to withstand falls, bumps, moisture, dust, UV rays, and extreme temperatures. Just don’t leave it out in a rainstorm, and remember that the included charging base is for indoor use only.
• When the microphone is on, the speaker tunes itself with automatic TrueplayTM for amazing sound no matter where you are and what you’re listening to.
• Don’t use or store your Sonos speaker upside down.

Bluetooth pairing

1. Turn Bluetooth on in your device settings.
2. Press and hold the Bluetooth button on the back of the speaker until you hear a tone, then release. The status light blinks blue when the speaker is ready to pair.
3. Choose Move 2 from the list of available devices in your Bluetooth settings. Your mobile device will automatically connect next time.

Charging

• Charging base
  

  • Just set Move 2 on its charging base for easy recharging.
  • Make sure the speaker is seated properly in the base and the charging contacts are touching.
  • Use only the supplied power cord with the charging base (using a third-party power cord will void your warranty).
  • Charging base is for indoor use only—be sure to keep it dry.
    Tip: Move 2’s remaining battery life is always visible in the Sonos app.

• USB-C port

  • For charging on the go.
  • Use a compatible USB-PD certified charger.

Microphone on/off

There are two ways to control the microphones on Move 2:
A universal microphone switch on the back of the speaker turns all microphones on and off. A voice services button on top of the speaker turns voice services on and off without affecting the microphones needed for Trueplay and other microphone-dependent features.

• When both are on, voice control and all microphone-enabled features are available.
• When both are off, voice control and and all microphone-enabled features are unavailable.
• When the universal microphone switch is on and the voice services light is off, Trueplay and other microphone-enabled features are available but voice control is off.

Voice services

Use your voice to control your Sonos system with any voice-enabled Sonos product—play and control content, turn the volume up or down, and more.

• Sonos Voice Control: control your whole Sonos system with hands-free ease and unmatched privacy. Sonos Voice Control comes ready to use—it only takes a few seconds to add when you set up your speakers. More information
• Amazon Alexa: you’ll need the Sonos app and the Alexa app with the Sonos skill enabled. You’ll make some changes in both apps during setup. Learn more
• Siri: you’ll need the Apple Home app. Add your AirPlay2-compatible Sonos speakers to the Apple Home app and then use an iPhone, iPad, or Apple TV to ask Siri to play music (currently limited to Apple Music). Learn more
  Note: Voice control isn’t supported in every country yet—this feature will be available as soon as Sonos and a voice service launch together in your region.

Trueplay™
Trueplay tuning measures how sound reflects off walls, furnishings, and other surfaces in a room, then fine tunes your Sonos speaker to make sure it sounds great no matter where you place it.
During setup, choose the Trueplay option that works best for you and your space. To retune later, go to > System, choose a room, and select Trueplay.

Advanced tuning
Advanced tuning is custom and precise. It takes about 5 minutes and uses the microphone on an iOS device (running iOS 8 or later) so you’ll move around the room while the sound is fine tuned for your space.
Note: Advanced tuning is the best choice for large rooms (open concept spaces may experience less precise tuning).

Quick tuning
Quick tuning is fast, effortless, and accessible. It takes about a minute and uses the microphone on your Sonos product to detect the environment so there’s no need to move around the room during tuning.
Note: Quick tuning is available for both iOS and Android, and is a good choice for smaller rooms, or spaces where it’s difficult to move easily.

Auto Trueplay
Portable Sonos products like Sonos Roam and Move can tune themselves automatically. Auto Trueplay uses your speaker’s microphone to detect the environment and make periodic tuning adjustments so you get great sound wherever your speaker is and whatever you’re listening to.
Go to >System, and select your portable speaker to turn on auto Trueplay.

Set up stereo pair

Pair two Sonos speakers in the same room for an even wider, stereo experience. One speaker serves as the left channel and one serves as the right channel.
Note: The Sonos speakers in a stereo pair must be the same type.

1. Place the speakers 8 to 10 feet apart. Your favorite listening position should be 8 to 12 feet from the paired speakers—less distance increases bass, more distance improves stereo imaging.
2. GO to > > System.
3. Select one of the speakers you want to use in the stereo pair, then choose Set Up Stereo Pair to get started.

Product settings

You can customize Sonos products for your surroundings. Go to >System and select a product.

Specifications

POWER & CONNECTIVITY

DETAILS & DIMENSIONS

Important safety information

Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with a dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products.
   Sonos products with rubber rings on the bottom, such as Move, Move 2, One, and One SL, may leave a faint ring on some surfaces treated with polyurethane. This ring can be easily removed by wiping with a damp cloth.

6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.

8. Do not expose batteries (battery pack or batteries installed) to excessive heat such as sunshine or fire.

9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to heavy rain or moisture, does not operate normally, or has been dropped.

13. The Mains plug should be readily available to disconnect the equipment.

14. Connections between this device and external equipment must be made using a shielded cable in order to maintain compliance with FCC radio frequency emission limits.
    Warning: Sonos Move 2 meets IP54 water resistance levels. To reduce the risk of fire or electric shock, don’t expose this apparatus to a soaking rainstorm.

References

• Adjust the bass, treble, balance, and loudness | Sonos
• Sonos LED lights | Sonos
• Setting a volume limit on Sonos products | Sonos
• Set up an Amazon Alexa device to control Sonos | Sonos
• Use Siri to control Sonos speakers | Sonos
• Create a stereo pair | Sonos
• Disable or enable WiFi on your Sonos products | Sonos
• Using touch controls on Sonos products | Sonos
• Tune your Sonos speakers with Trueplay | Sonos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>