boAt Wave Glory Pro Smart Watch User Manual
- June 15, 2024
- Boat
Table of Contents
boAt Wave Glory Pro Smart Watch
PRODUCT INFORMATION
WAVE GLORY PRO
Thank you for choosing the Wave Glory Pro as your fitness transformation companion. Allow this manual to guide you through the functioning of your smartwatch. Please read it thoroughly before using it for a smooth sail. You may refer to these instructions for later use as well.
Package Contains
- Wave Glory Pro x1
- USB magnetic charging cable xi
- User Manual x1
- Warranty Card x1
**CHARGING THE WATCH
**
The smartwatch must be charged before initial use. It takes up to 2 hours to be fully charged. Connect and charge the watch with the image below as a reference, using a 5V/2A adapter.
TURNING THE WATCH ON
- To restart or turn the watch on, long-press the upper side button for 3-5 seconds.
- You can wake up the screen by lifting your wrist.
CONNECTING TO THE APP
- Download the boAt Crest app on your phone. Available on both the App Store (IOS 12.0 and above) and Google Play Store (Android 7.0 and above) OR Scan [OR CODE] (Also available on the watch)
- Connect the device with the boAt Crest app; ensure that the phone’s Bluetooth as well as the GPS functionalities are turned on
- Select Glory Pro on the app’s home screen and click Pair to connect.
- Once connected, you will get an alert to connect with GLORYPRO_XXXX, click pair if need to receive or make calls from the watch
- To use all your Glory Pro features seamlessly, tap on ‘yes’ to the ‘connection’ and ‘grant access’ system prompt.
- Disable battery optimization
Note : To ensure connectivity throughout your journey, make sure the app is allowed to always run in the background of your phone.
SYNCING YOUR SMARTWATCH TO THE APP
Data Synchronization
- Open the app on your phone.
- Make sure your Wave Glory Pro is connected to the app.
- Synchronized on vi sar almost cony once you enter the sp interface.
Note:
Synchronize data at least once a day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS
SHORT PRESS THE UPPER SIDE BUTTON FOR THE MAIN MENU
Calls
-
Contacts
Add up to 10 contacts from the boAt Crest app. You can select any contact to directly dial from the watch. -
Call History
You can find recently received, missed, and outgoing call logs in the call history of the watch -
Dial
Use a dialer to dial any number from the watch. -
Sports
Choose from multiple sports modes like Running, treadmills, Walking, Cycling, Climbing, Basketball, Badminton, Football, Yoga, and Free Movement.
You can add or replace the activities according to your preference directly from the watch.
Tap on any sports mode to start the activity, click on the Go button, and the watch will start recording the duration of the activity.
Side-press the upper side button to pause or stop the activity. The activity will not be recorded if it is less than 3 mins. -
Record
Sync your smartwatch to the app to get a detailed record of your activities . -
Activity
Click on this and swipe up to check your daily activity data like calories. distance covered and step count. -
Heart Rate Monitor
Wear the watch with your wit by dying upper conta stare measurements.
Not e: Measurements are for reference only and not for medical purposes -
About
Shows the device details. -
Sp02 monitoring
Wear the watch on your wrist, then click on the icon to start measurements. You can view the current, resting HR, and Average HR on the watch. You can also view detailed data through the app.
Note : Measurements are for reference only and not for medical purposes. -
Stress monitoring
Click this option to start the stress monitoring. Make sure you wear your watch on your wrist property to get accurate results. Analysis of the measurement is
Relax: 1-29
Normal: 30-59
Medium: 60-79
High: 80-100
Note : Measurements are for reference only and not for medical purposes. -
Stopwatch
Click on this to start the stopwatch on your watch. -
Contacts
Click on this to add contacts from the boAt Crest app. -
Notifications
You can check all the notifications from here. -
Sleep Monitor
Tap on the icon to review the sleep data of the previous night.
Once the asleep criteria are met, your smartwatch will start recording from 8 pm to 10 am the next day.
Once you lie down and watch detects no movement for 30 minutes, it will start recording and stop recording if it detects excessive movement.
You can check the data on the app only after the awake criteria are met.
You can also track sleep scores on the watch or through the boAt Crest app.
Note:
For accurate sleep data recording, the asleep criteria have to be met. including limited movement, wrist positions and angles, and more.
The awake criteria will be met only after it records some noticeable movement -
Weather
Connect with the boAt crest app to get daily weather updates on the watch. -
Alarm
Tap on this to set an alarm on your watch. -
Music
Tap on the remote music control icon on your watch to play music from your phone.
Note : Some apps with different protocols might not work. -
Breathing Exercises
Click on the breath exercises icon to regulate your breathing by doing breathing exercises. You can set the time and level of exercise. -
Timer
Tap on this to turn on the timer. -
Find Phone
Tap on this icon to find your phone. Once enabled, your phone will start ringing and vibrating. Tap again to stop it.
Note : Your smartwatch should be connected to your phone via Bluetooth and within its range for this feature to work. -
Game
Tap on this to access the built-in game. -
Calendar
Click on the calendar to check the date, day, and month. -
Voice Assistant
Tap on this to enable the voice assistant feature and give the command from the watch. The results will be seen on the phone.
Note : Make sure the watch is connected to the app and the phone is unlocked -
Calculator
Tap on this icon to do all the calculations in your smartwatch. -
Always on Display
Click on this to enable always on display, You can also select Digital, and Analog AOD mode.
Note : The battery will drain quickly once this mode is enabled -
Camera
Tap on the remote camera icon on your smartwatch to click a photo from your phone.
Note : Turn the camera on from your phone to use this feature. -
Do not Disturb
Tap on this to turn on the Do Not Disturb mode. -
Bedside Clock
Click on this to enable the bedside clock -
World clock
Click on the world clock to check time across the globe. -
Reboot
Tap on this to reboot the watch. -
OR code
Tap on this and scan the bar code from mobile to connect the smartwatch.
SETTINGS
- Dial Setting
Tap on this icon to change your watch face.
General
-
Wake Gesture
Tap on this to enable a wake gesture. -
Password
Tap on this to set a password -
Brightness
Tap on this to adjust the brightness. -
Theme
Tap on this to select a theme Paper this to switch your watch off. -
Factory Reset
Tap on this to reset the watch data. -
Note : All data will be erased if the watch is reset
-
SWIPE DOWN TO ACCESS THE NOTIFICATIONS
You can check all the notifications from here. -
SWIPE UP TO ACCESS THE SHORTCUT MENU
You can access AOD. Wake Gesture, Flashlight, DND. Brightness, Settings. Phone: Calculator, Vibration, Battery, Stopwatch, Password: -
SWIPE LEFT TO ACCESS ALL DATA
You can access heart rate, daily activity, stress, and SpO2. You can also customize the data according to your preferences. -
SWIPE RIGHT TO ACCESS THE WIDGET CONTROL
You can access the widget control feature from here. -
SHORT PRESS THE LOWER BUTTON TO LOCK THE SCREEN
You can lock the screen by short-pressing the lower button. -
FUNCTIONALITY OF UPPER SIDE BUTTON
You can change the watch faces by rotating the upper side button. You can also move up and down the menu by rotating the upper side button. Long press the button to go to the voice assistant feature.
PRODUCT PARAMETERS
MAINTENANCE
- Regularly clean your wrist and the strap of the smartwatch, especially after sweating during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product.
- Do not wash the strap with a household cleanser. Please use soapless detergent, rinse thoroughly, and wipe with a piece of soft towel or napkin.
- For spots or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure.
FAQ’s
Search for the app to connect keeps failing
- Keep the boat Crest app updated to the latest version
- Close all the programs on the watch → Stop and restart Bluetooth and GPS → Connect again
- Check and enable notification functions of your phone and keep the phone and watch in close contact.
Note : Make sure your phone system meets Android 7.0 and above and IOS 12.0 and above.
My Wave Glory Pro is receiving no alerts, texts, or phone calls Make sure smart reminders on the app are on and synced to the Glory Pro. Also, make sure the notification center of the phone is displaying messages. Only then will your smartwatch also display those notifications. Make sure the app is running in the background and the battery optimization feature on the phone is disabled.
My Bluetooth keeps getting disconnected
- Make sure there is not more than a 7m distance between Bluetooth on the phone & the watch.
- There is no obstacle between the watch and the phone.
- Make sure the app is running in the background
Which functions of the Wave Glory Pro need Bluetooth to work?
Call and text Notifications, Find My Phone, music control, camera control,
weather forecast, cloud, and custom watch faces need Bluetooth connectivity to
work.
Will it be okay to take a bath wearing the Wave Glory Pro?
The IP67 water resistance will only work under the following conditions:
- Maximum depth of water: 1.5m
- Maximum time for exposure to water:
- 10 minutes The watch isn’t suitable for hot baths,
- hot springs,
- saunas,
- snorkeling,
- diving,
- water skiing and other wading or deep-water activities with high-speed water flow.
SAFETY & PRODUCT INFORMATION
Battery
- Do not disassemble, bore, or damage the battery.
- Do not disassemble the built-in batteries of non-replaceable battery devices.
- Do not use sharp objects to remove the battery.
Health Warning
- If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch.
- The optical heart rate sensor will glow green. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device.
- The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, sleep, distance, heart rate, and calories, but may not be completely accurate.
- The device accessories, heart rate sensor, oxygen level monitor, and other relevant data are designed for fitness and not for medical purposes. They do not apply to the diagnosis. monitoring, treatment, or prevention of any diseases or symptoms. The heart rate and blood pressure data are for reference only. We’re not responsible for any deviation in data.
- Avoid wearing the watch too tightly. Make sure you keep your skin dry – the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin. immediately stop using the watch and consult the doctor.
Things to keep in mind
- Sync data every day day to avoid data loss.
- Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents & other corrosive liquids. The damage or defects caused by misuse or improper use are not covered by the warranty.
- Sports modes support up to 6 hours of exercise at a time.
- Avoid wearing the watch too tight in daily use. Keep the parts of the skin touching the watch dry.
- Keep your arm still while measuring data for accurate measurement.
Disclaimer :
This product is an electronic monitoring product and is not intended as a
medical reference. We reserve the right to modify or improve any of the
functions described in this manual without any prior notice. At the same time,
we hold the right to continuously update the product content.
CAUTION
THERE RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Old electrical appliances must not be disposed of together with the residual
waste. but have to be disposed of separately. The disposal at the communal
collecting point via private persons is free. The owner of old appliances is
responsible for bringing the appliances to these collection points or similar
collection points. With this little personal effort, you contribute to
recycling valuable raw materials and treatment of toxic substances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>