Baseus PB3813Z-P0A0 Portable Power Station ioTa User Manual
- June 15, 2024
- Baseus
Table of Contents
Baseus PB3813Z-P0A0 Portable Power Station ioTa
- Thank you for purchasing the Baseus ioTa Series Portable Power Station (hereinafter referred to as Baseus Digital Portable Power Station).
- The information contained herein affects your safety and your legal rights and responsibilities.
- Read this entire document carefully to ensure proper configuration before use. Failure to read and follow the instructions and warnings herein may result in serious injury to you or bystanders, or damage to your device or property. Shenzhen Baseus
- Technology Co. Ltd. reserves the right to the final explanation for this document and all relevant documents relating to Baseus Digital Portable Power Station, and the right to make changes at any time without notice.
- By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein.
- You agree that you are solely responsible for your conduct while using this product and for any consequences thereof.
- You agree to use this product only for purposes that are proper and by all terms, precautions, practices, policies, and guidelines Shenzhen Baseus Technology Co. Ltd. (Baseus Digital Portable Power Station) has made and may make available.
- Shenzhen Baseus Technology Co. Ltd. (Baseus Digital Portable Power Station) accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product.
- Users shall observe safe operation guidelines including, but not limited to, those set forth herein.
Function Description
- This product is developed based on industry-leading digital power technology. It supports PD3.1 140W fast charging, and fully charges your device in a snap;
- This product uses an LCD screen to display real-time operation status (battery level, operating temperature, current input/out- put power, remaining charging time), charge and discharge reminder, port status, etc.
- It supports 420W of sine wave AC power output to supply products with a rated power of lower than 420W, such as car-mounted mini-fridges, car-mounted ice machines, desk lamps, small rice cookers, etc.
- It supports simultaneous power output of up to 8 products, with a maximum of 140W PD fast charging via a single Type-C1 port; it also accommodates multiple protocols for USB/Type-C-based fast power output to meet the charging needs of digital products.
- Supports no more than 2 methods of input for charging: Type-C1 PD3.1 fast charging (140W Max.), DC port charging (100W Max.);
- The DC input charging port is compatible with the MPPT protocol, supporting direct power supply via car-mounted chargers and direct charging via solar panels with an MC4 interface.
- The built-in LED lighting provides three lighting modes: long light, SOS, and strobe. You can switch the mode by pressing the button or adjusting the brightness of the long light via the app.
Product Specification
- Name: Digital Power Bank 420W
- Model No.: BPE42B
- Battery Capacity: 90000mAh/288Wh
- Solar DC input: 12-25V-8A 100W Max.
- Type-C1 Input: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A, 28V-5A 140W Max.
- AC Output: 100V-120V~3.82A 60Hz 420W (Pure Sine Wave; Peak Power 840W)
- USB1/USB2 Output: 5V-3A, 9V-3A, 10V-2A, 12V-2.5A
- Type-C1 Output: 5V-3A, 9V-3A, 12V-3A, 15V–3A, 20V-5A, 28V-5A 140W Max.
- Type-C2 Output: 5V-3A, 9V-3A, 12V-2.5A
- Type-C1+Type-C2 Output: 100W+30W
- USB1+USB2 Output: 5V-5A
- USB1+Type-C1 Output: 30W+100W
- USB2+Type-C2 Output: 5V-5A
- Type-C1+(Type-C2+USB1+USB2)Output: 100W+25W
- DC+Car Charger Output: 13.5V-7.4A 100W Max.
- Total Output: 4 20W
- Product Size: 260X170 X 118mm
- Weight: About 3.7kg
- Execution Standard: Q/BASEUS 047
- List of Accessories: Solar Charger Cable (MC4 to DC Input), Superior Series Fast Charging Data Cable Type-C to Type-C (240W), User Guide, Warranty Card
Package Including
- Baseus ioTa Series Portable Power Station 420W(US/JP 110V) X1
- Solar Charger Cable (MC4 to DC Input) X1
- Superior Series Fast Charging Data Cable Type-C to Type-C (240W) X1
- User ManualX 1
- Warranty Card X1
Schematic Display of Product
Download the Baseus App and User Manual
- Scan the QR code on the right for the download address with your mobile device, or https://us.baseus.com/download (in other languages) in the search bar to download the app.
- Please follow the guide in the app to register (if you have registered, please log in directly), log in, add equipment, and then connect and operate.
Instructions
Note: The following instructions assume that the APP has been connected to the product. If the connection is broken or the distance between them is too far (over 10 meters), the APP may not be able to instantly respond or issue reminders or alerts timely, affecting user experience. It is recommended to use the product while keeping the APP on and keep it close for smoother use.
Start/shutdown
- Press the power button for 2s to turn on the product, the power indicator lights up, screen prompts you to enter standby mode
- In the power-on state, press and hold the power button for 2 seconds to turn it off with the power indicator.
- The default standby time of this product is 15 minutes. If the inverter switch/LED light switch is off and the product has no load accessed, the product will automatically turn off in 15 minutes.
How to charge a device
- Charge a device via a USB/Type-C/DC port
- After the product is turned on, the USB/Type-C/DC port will enter the standby mode and can be used to charge cell phones or other digital products with compatible data cables.
- Meanwhile, the main screen will display all parameters for reference, including the current total output power, current temperature, remaining battery level, and remaining discharge time under the current output power.
Charge a device via the AC port
- After the product is turned on, press and hold the AC output button for 2 seconds to enable AC inversion output, with the AC output indicator on. Now you can plug in and charge an AC device.
- Under the AC output state, press and hold the AC output button for 2 seconds to disable AC inversion output, with the AC output indicator off.
- Warning: There is a high voltage output after the AC inversion output is enabled. Please do not plug metal or conductive objects into the AC main socket to avoid electric shock.
How to charge the product
- This product supports up to 140W PD fast charging and accommodates all adapters and car-mounted chargers that are compatible with the PD protocol.
DC charging
- The DC port supports the MPPT protocol and can be charged with car-mounted chargers or solar panels.
- When the product starts charging, it will enter the power-on state automatically in order to monitor all modules and provide feedback on operation status in real-time.
Note:
- The product will not enter automatic shutdown when it is charged with a device through USB/Type-C/DC/AC ports.
- The value of each parameter on the main screen is measured by a built-in program, which may be subject to errors and changes in real-time. The parameter information is for reference only.
- Please check the charging and discharging chart of the ports in the APP for more details about the charging and discharging of the ports.
LED Lighting
- This product comes with an LED floodlight for emergency lighting needs;
- Press and hold the LED switch/mode switch button for 2 seconds to turn on the LED light. The light has a default state of staying on for a long, or it can be switched by pressing applicable buttons to two other modes which are SOS and strobe.
- Please adjust the brightness under the long-on mode in the app.
- Under the LED lighting state, press and hold the LED switch/mode switch button for 2 seconds to turn it off.
- Note: If the LED lighting is on, the default standby time of this product will be adjusted to 8 hours for any need for emergency lighting at night.
Advanced use of the APP
- You can contact Baseus for lon 1 customer service via the app to solve problems you may have.
- The device name can be edited in the app.
FAQ
- What type of battery is used in the product?
- This product uses a high-quality automotive-grade lithium iron phosphate battery.
- What equipment can be charged via the AC output port of the product?
- The AC output of the product is rated at 420W with a peak power of 840W, being able to supply power to most consumer electronics.
- However, please check the rated power of your equipment and make sure that the total power of all load equipment is lower than the rated power before using it.
- How do I know how long the product can supply power?
- The LCD will show the remaining battery life and calculate the remaining discharge time based on the current power, for reference only.
- How can I tell the product is charging?
- When charging, the LCD will show the remaining charging time and input power.
- Does the product support simultaneous charging and discharging?
- The Type-C port and USB port support simultaneous charging and discharging; when using the DC port to charge the product, it does not support output charging.
- How to clean this product?
- Please use a dry, soft, and clean cloth or paper towel to wipe this product.
- Can I carry this product on the plane?
- Equipment no larger than 160WH is allowed on planes. This product is 288Wh, so it is not allowed on planes.
- How do I store and maintain the product?
- It is recommended to use or store the product at a temperature of 20-30°C and keep it away from water, heat sources, and metal objects.
- For long-term storage, please charge and discharge the product once every 3 months (discharge it to 30% and then charge it to 60%).
- For safety reasons, do not store this product when the temperature is higher than 45°C or lower than -10°C for a long time.
- If the power of this product is less than 1% after use, please charge it to 80% before storing it. If left idle for a long time in a low or full battery, its battery core will suffer irreversible damage and the service life of the product will shorten.
- If the product has low remaining power and has been idle for too long (not in an over-discharged state), it will enter deep sleep mode and need to be charged before being used again.
Common Problems & Troubleshooting
- If any alert occurs during the use of this product and the alert icon does not disappear after the product is restarted, please stop using the product immediately (do not attempt to charge or discharge).
- If the above information fails to resolve your problem, please contact customer service for further support.
Statement on Toxic and Hazardous Substances in Electronic Information Products
This form is prepared by SJ/T 11364 regulations.
0: Indicates that contents of the toxic and hazardous substances in all
homogeneous materials are below the limit requirements specified by GB/T 26572
standard.
X: Indicates that contents of the toxic and hazardous substances exceed
the limit requirements specified by GB/T 26572 standard in at least one
homogeneous material of the component.
This product complies with EU RoHS 2.0 Directive(2011/65/EU)
The 5-year icon refers to the “effective life of environmental protection”,
not the product quality assurance period. Electronic products all contain
toxic and harmful substances such as lead, mercury, and cadmium. Once they are
overused, toxic and harmful substances may leak or mutate, cause pollution to
the environment, or cause serious damage to people and property. The term”
environmental protection use'” means that all electronic products will be
required to be used within this effective period. We will no longer be
responsible for the quality of the products due to the safety risks that arise
after the safe use period.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Warning:
Operation of this equipment in a residential environment could cause radio
interference.
FCCID: 2A482-BPE42B
Warning Please follow the above safety instructions otherwise it may
cause fire, electric shock, damage or other injuries.
- Manufacturer: Shenzhen Baseus Technology Co., Ltd.
- Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
- Gangtou Community, Bantian Street, Longgang District, Shenzhen
- Executive Standard: Q/BASEUS 047
- Hotline: +86-4000-712-711 Website: www.baseus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>