MH IXTRA M Ixtra M Atlantic Monobloc Heat Pump Installation Guide
- June 15, 2024
- Atlantic
Table of Contents
Atlantic MH IXTRA M Ixtra M Atlantic Monobloc Heat Pump
Product Information
Specifications
- Product Name: MH IXTRA M
- Type: Hydraulic unit for Monobloc 1 service
- Compatible with: Heat pump & Boiler
- Model: ML Hydraulic unit 024155
- Weight: 62 kg
Product Usage Instructions
Installation
To install the MH IXTRA M hydraulic unit, follow these steps:
- Place the unit in a suitable location with the following minimum clearances:
- Minimum distance from the wall (front): 350 mm
- Minimum distance from the wall (side): 300 mm
- Minimum distance from the ceiling: 800 mm
- Minimum distance from the floor: 1000 mm
- Connect the necessary cables and terminals according to the labeled connections on the unit:
- Connect the power supply terminal to the power source.
- Connect the boiler/DHW terminal to the boiler and DHW kit.
- Connect the sensors terminal to the appropriate sensors.
- Connect the OU/IU interconnection terminal (Modbus) if required.
- Ensure all connections are secure and properly tightened.
- Verify that the unit is level and stable.
Operation
Once the MH IXTRA M hydraulic unit is installed, follow these instructions to operate the unit:
- Turn on the power supply.
- Use the controller/user interface to set the desired temperature and operating mode.
- Press the Start/Stop button to start the unit.
- Monitor the manometer to ensure proper pressure levels.
- Check the flowmeter to monitor the flow rate.
- If necessary, adjust the heating circulation pump speed using the control options provided.
- If required, drain the unit using the drain valve.
FAQ
Q: What certifications does the MH IXTRA M hydraulic unit have?
The MH IXTRA M hydraulic unit is Keymark certified. It complies with various
directives and standards, including the Low Voltage Directive 2014/35/EC,
Electromechanical Compatibility Directive 2014/30/EC, Machines Directive
2006/42/EC, Pressure Equipment Directive 2014/68/EC, Ecodesign Directive
2009/125/EC, and Energy Labelling Directive 2010/30/EC.
Q: What refrigeration fluids does the MH IXTRA M hydraulic unit use?
The MH IXTRA M hydraulic unit complies with Decree No. 92-1271 and Regulation
842/2006 of the European parliament regarding refrigeration fluids. It uses
refrigeration fluids that meet the standards and testing methods specified for
air-conditioners, refrigeration units, and heat pumps with compressor driven
by electric motor for heating and refrigeration.
For professionals. To be kept by the user for future reference
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>