HARDELL Q0M-DC-4S Mini Cordless Rotary Tool Instruction Manual
- June 15, 2024
- HARDELL
Table of Contents
HARDELL Q0M-DC-4S Mini Cordless Rotary Tool
Product Information
Specifications
- Model: Q0M-DC-4S
- Voltage: 4V
- Battery: 1500mAh
- Charging Model: TYPE-C
- Speed Setting: 5000/8000/11000/14000/18000 RPM
- Accessories: 86pcs
Product Usage Instructions
Speed Indicator
The speed indicator on the product shows the current speed setting of the device. It will display the RPM (revolutions per minute) value.
Speed Control and On/Off Switch
To control the speed of the device, use the speed control button. Long press the button to turn off the device.
USB Charging
The product can be charged using a USB cable. Connect the TYPE-C charging cable to the device and plug it into a power source.
Spindle Locking Button
The spindle locking button is used to lock the spindle in place for easy accessory changes. Press and hold the button while changing accessories.
Heat Dissipation Holes
The heat dissipation holes on the device help dissipate the heat produced by the motor during operation. Ensure these holes are not blocked to prevent overheating.
Nut
The nut is used to secure accessories in place. Tighten or loosen the nut as required when attaching or removing accessories.
Safety Instructions
- Do not attempt to repair the product by yourself. Contact our after-sales team for assistance.
- Read and follow the instructions provided with the product to avoid any damage or injury.
- The warranty period for the product is 1 year from the date of purchase.
- The warranty does not cover loss, alteration, breakage, or damage caused by misuse or failure to follow the provided instructions.
Warranty
The product supports a 1-year warranty from the date of purchase. This warranty does not apply to products that have been lost, altered, broken, or damaged by misuse or failure to follow the instructions provided with the product. Never try to repair the product by yourself. For any inquiries concerning our products, please contact our after-sales team via hardell.service@gmail.com. We are available to help you solve your problem at any time.
FAQ
Q: How long does it take to fully charge the battery?
A: The charging time may vary depending on the power source, but it usually takes approximately X hours to fully charge the battery.
Q: Can I use the product while it is being charged?
A: No, it is recommended to avoid using the product while it is being charged to ensure safety and prevent any damage to the device.
Q: Are spare accessories available for purchase?
A: Yes, spare accessories can be purchased separately. Please contact our customer service for more information on available accessories.
Thank you for purchasing our products. In order for you to use our products correctly, please read the product manual before use. If you have any questions, please contact us via Amazon or email: hardell.service@gmail.com. We will get back to you within 12 hours!
PRODUCT DESCRIPTION
SPECIFICATIONS
- Model: Q0M-DC-4S
- Battery： 1500mAh
- Voltage: 4V
- Charging Model: TYPE- C
- Speed Setting: 5000/8000/11000/14000/18000 RPM
- Accessories: 86pcs
HOW TO USE
- STEP 1 Press down the spindle locking button and unscrew the nut.
- STEP 2 Choose the suitable collet and put the black nut.
- STEP 3 Insert the bits you need, hold the lock button and screw on the nut tightly.
- STEP 4 Do not press the spindle lock button when the motor is running.
How to fit a sanding band?
- STEP 1.Unscrew the nut of the sanding drum.
- STEP 2.Install the sanding band.
- STEP 3.Tighten the nut of the sanding drum using wrench
How to fit the HSS cutting disc/sanding paper?
- STEP 1.Unscrew off the nut of the mandrel.
- STEP 2.Install the cuttingdisc /sanding paper with 1 red washer on each side.
- STEP 3. Tighten the nut of the mandrel to finish installation.
PACKAGE INCLUDES
ATTENTION
Not for Heavy-duty Projects!
Safety Instructions
- Keep this product away from children.
- Keep this product away from water.
- Do not touch it with wet hands.
- Do not place the product on hot surfaces,near hot surfaces or an open fire.
- Do not dismantle the appliance under any circumstances.
- Do not hold the work by hand or against your body and may lead to loss of control.
- Do not replace accessories while the tool is on.
- Do not force tool.
- Maintain tools with care.Keep cutting tools sharp and clean.
- Use only accessories that are recommended by the manufacture for your model.
- Use this power tool and accessories following the instructions.
- Please disassemble the equipment under professional guidance.
Warranty
The product supports a 1-year warranty from the date of purchase.This warranty does not apply to products that have been lost,altered,bro-ken,or damaged by misuse or failure to follow the instruction provided with the product.Never try to repair the product by yourself.For any inquiries concerning our products,please contact our after-sales team via hardell.service@gmail.com We are free to help you solve your problem at any time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>