onn WIAMSP100029283 Mirror Glass Screen Protector User Guide
- June 6, 2024
- Onn
Table of Contents
Mirror Glass Screen Protector
Quick Start Guide
Cleaning
If you have a case on your device, remove it.
Clean the Screen
Clean the device screen with the wet wipe.
Dry the Screen
Dry with the microfiber cloth. Ensure the screen is completely dry before proceeding.
Screen Protector Application
Remove Safety Film
Using the tab labeled “1-Back”, peel away to expose the adhesive.
Tip: Hold the screen protector using the top and bottom tabs.
Do not touch the adhesive on the glass.
Place the Screen Protector
Hold the application guiding tabs and align over the device screen. Once in
position lower onto the device.
Tip: If you need to reposition, gently lift up and reapply.
Attach the Screen Protector
Press firmly down along the center to adhere the screen protector.
Final Steps
Remove the Top Film
Carefully peel off the application tab layer.
Remove Air Bubbles
If there are any air bubbles, remove them by starting from the center and pushing firmly outward toward the edges.
Note: Small bubbles may dissipate over the next 48 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>