HakkaGrow B0BYNFVK86 52 Ceiling Fan with Lights and Remote Control User Guide
- June 15, 2024
- HakkaGrow
Table of Contents
B0BYNFVK86 52 Ceiling Fan with Lights and Remote Control
52″ CEILING FAN WITH LED LIGHT KIT AND HAND REMOTE
Packing List & Asssembly Parts
Below are the fan parts packing list and all of them are required to complete the fan assembly.
| Mounting Bracket Screws for
Wooden Ceilings
---|---
| Fan Blades Screws & Washers
| Fan Blades Balancing Kits
| Mounting Bracket Screws for
Cement & Solid Ceilings
Fan Assembly Guide
| A | Fan Blades x 3 (Required on Page 5) | B | Downrod6inx 1 (Required on Page 11) |
|---|---|---|---|
| C | Downrod 12inx 1 (Required on Page 11) | D | Downrod 24inx 1 (Required on Page |
- E| Motor Hub Cap x 1 (Required on Page 1)| F| Remote Control x 1 (Required on
Page 20)
G| Remote Control Holder x 1 (Required on Page 21)| H| Remote Control Battery x 2 (Required on Page 20)
I| Remote Control Holder Screws (Required on Page 21| J| Motorx 1 (Required on Page 5)
K| Light Kit Glass Coverx 1 (Required on Page 17)| L| LED Light Kitx 1 (Required on Page 7)
M| Mounting Bracket , Canopy x 1 (Required on Page 9)| N| Mounting Bracket Screw x 5 (Required on Page 14)
O| Flat Washers Ax 5 (Required on Page 14)| P| FanBlades Screwx 7 (Required on Page 5)
Q| Flat Washers Bx 7 (Required on Page 5)| R| Counterweight Clamp x 3
S| Weighted Paper x 9| T| Expansion Screws x 5 (Required on Page 13)
Fan Blades Installation
Noted: Use something to protect the blades or Fan Motor to avoid scratches
Make sure all 3 blades are installed firmly.
LED Light Kit Installation
Make sure the male end plugs into the female end firmly.
Your fan shall be in this shape till
this moment.
Separate the Bracket from the Canopy
Loose the screws from the canopy Rotate the canopy till it fits the holes
Take out the bracket from the canopy
Downrod, Canopy, Hub Cap Installation
Insert canopy and motor hub cap through downrod 
Take off the screws on the yoke
Wires go through the
downrod, Motor hub cap, Canopy.
Use the screw to fix the downrod.
Your fan shall be in
this shape till this step
Mounting Bracket Installation
Mark holes position for the bracket screws 
Mount the bracket by expansion screws
Use the screws to
mount the bracket on the wood ceiling directly.
Now It’s time to hang the fan onto the mountingbracket and do the wiring in the junction box.
Junction Box Wiring
Lift up the canopy until the holes on the
canopy match the holes in the mounting bracket
Rotate the
canopy to match the locking screws and make sure the screws are tightened so
the canopy won’t fall down.
Now. Your fan looks
like this.
Last Step: Install the Light Kit Glass Cover
Hold the glass
cover by hand turn it in clock direction till it clamps and fits the metal
part.
Congratulations! You have completed all the assembly Steps. Now
let’s switch on the ceiling fan and enjoy the wind. Remember, the hand remote
has already been paired with your ceiling fan, you can use it to control the
fan directly.
No pairing needed for new purchased ceiling fans from HakkaGrow.
Hand Remote Function
Remote Control Battery Installation 
Remote Control Holder
Installation 
Hand Remote Buttons/Functions Diagram 
www.HakkaGrow.shop
910-561-9797
HakkaGrow@gmail.com
All HakkaGrow Products are Proudly
Designed by HakkaGrow Team and Copyrights Reserved.
We offer 5 Years Warranty for Our Products.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>