OLIGHT Baton 4 Premium Edition Flashlight User Manual

USER MANUAL
Baton 4 Premium Edition

A rechargeable side-switch EDC flashlight with a wireless charger.

IN THE BOX

Table 1:
SPECIFICATIONS (Baton 4)

| IPX8
---|---
| Rechargeable Li-ion Battery
650mAh 3.6V (2.34Wh)
| Working temperature
0-40°C
| (L)63 (D)21mm
(L)2.48 (D)0.83in
| 52.5g/1.85oz
(Including Battery)

• Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.

Table 2:
Wireless Charger

USB-C Charging Cable

source.
When the power source capacity is insufficient, the charging time will be longer)

Multi-language dictionary, see Table 3.

1. Product specifications, see Table 1 and Table 2.

2. Product overview, see Figure 1.

3. Product instructions as below:

4. Remove the insulating films before first use, see Figure 2.
   Open the wireless charger and remove the insulating film between the charger and the flashlight. Then unscrew the flashlight body to remove the insulating film inside.

5. Charge：
   5.1 Charge the wireless charger, see Figure 3.
   During charging, the lightning sign on the display button will blink; when charging is completed, the lightning sign will be constantly on. The battery level will be displayed when the display button is pressed or the charger lid is opened or closed.
   5.2 Charge the flashlight with the charger, see Figure 4.
   During charging, the internal indicator will be red; after charging is completed, it will turn green before turning off.
   5.3 Charge external devices with the charger, see Figure 5.
   The charger will be activated and start charging the devices once they are connected and the remaining battery level will be displayed. To a device with a Lightning port, the charger will automatically sleep after the device is disconnected for 1 minute. Press the display button to reactivate the charger. After charging is completed, the display button will turn off.

6. Baton 4 operation instructions
   6.1 Turn On/Off the flashlight, see Figure 6.
   Press the button to turn on/off the flashlight. When turned on, the flashlight will light up at the memorized brightness level. (Moonlight, Low, Medium, and High modes will be memorized when turned off. Turbo mode will be memorized as High mode; High mode output will last for 1 minute before switching to Medium mode; Strobe mode will not be memorized.)
   6.2 Lock/Unlock, see Figure 7.
   To lock the switch button, when the flashlight is off, press and hold the button (for about 2 seconds) until the Moonlight mode turns on and off. When the button is locked, press the button once to display the remaining battery level without turning on the flashlight. Press and hold the button for 1 second or more to unlock the button and activate Moonlight mode.
   6.3 Moonlight mode, see Figure 8.
   To activate Moonlight mode, press and hold the button for 1 second or more when the flashlight is off. If the last used mode was Moonlight mode, simply press the button.
   6.4 Turbo mode, see Figure 9.
   Quickly double-press the button to enter Turbo mode.
   6.5 Strobe mode, see Figure 10.
   Quickly press the button three times or more to enter Strobe mode. Press the button once or hold it down to exit Strobe mode.
   6.6 Adjusting brightness, see Figure 11.
   When the flashlight is on, press and hold the button. The flashlight will cycle through Low, Mid, and High modes, starting from the present brightness level. Release the button to select the desired brightness level. (Note: Moonlight mode and Turbo mode are not included in this cycle).
   6.7 Auto Shut-Off function, see Figure 12.
   The flashlight can be set to automatically turn off after two preset periods: a long period (9 minutes) and a short period (3 minutes). To activate the Auto Shut-Off function, double-press and hold the button when the flashlight is on. After the function is turned on, the light will flash once to indicate that the short period is set, and twice for the long period. To switch between timing periods, double-press and hold the button during a timing period. When reactivating the Auto Shut-Off function, the previous timing setting will be used.

7. Indicators instructions as below:
   7.1 Brightness level indicator, see Figure 13-1.
   7.2 Battery level indicator, see Figure 13-2.

8. Wireless charger operation instructions
   8.1 Turn the flashlight ON/OFF with the charger, see Figure 14.
   Press the display button to turn on/off the flashlight. When turned on, the flashlight will light up at the memorized brightness level. (Turbo mode will be memorized as High mode; High mode will be memorized as Medium mode 1 minute after the flashlight is off.)
   8.2 Close the lid to turn off the light, see Figure 15.
   When Baton 4/Baton 3 is illuminating in the charger, it will automatically turn off when you close the lid (please keep the tail of the flashlight and the charging port clean). This feature is not compatible with S1R/S1RII/Perun mini/Perun 2 mini.
   8.3 Moonlight mode, see Figure 16.
   To activate Moonlight mode, press and hold the display button for at least 1 second while the light is off.
   8.4 Change the flashlight brightness with the charger, see Figure 17.
   When the light is on in the charger, long press the display button to change the brightness smoothly. The flashlight can stay lit during charging with the lid open. Please note that S1R/S1RII/Perun mini/Perun 2 mini do not support stepless dimming via the charger.
   8.5 Low battery indication, see Figure 18.
   If the charger battery level is below 10% when charging the flashlight, the remaining battery level will be constantly displayed.

Table 3
Multi-language dictionary

• Moonlight
• Low
• Medium
• High
• Turbo
• Strobe
• Press
• Stepless dimming
• Double press
• Press and hold
• Triple press
• Blink once
• Blink twice

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
Battery warranty: Olight offers a one-year warranty for all rechargeable batteries.
Wireless Charger: 2 years.
If you experience quality problems or damage with low-value fittings like lanyards or clips within 30 days of purchase under normal use conditions, please contact our after-sale service. For issues that occur after 30 days or for damage caused by abnormal use conditions, we provide a conditional quality assurance as appropriate.
USA Customer Support: cs@olightstore.com
Global Customer Support: contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd.
4th Floor, Building 4, Kegu Industrial Park,
No 6 Zhongnan Road, Changan
Town, Dongguan City, Guangdong, China.
Made in China CAN ICES-005 (B) / NMB-005 (B)
3.4000.0684
A. 09, 28, 2023

Documents / Resources

| OLIGHT Baton 4 Premium Edition Flashlight [pdf] User Manual
Baton 4 Premium Edition Flashlight, Baton 4, Premium Edition Flashlight, Edition Flashlight, Flashlight
---|---
| OLIGHT Baton 4 Premium Edition Flashlight [pdf] User Manual
Baton 4 Premium Edition Flashlight, Baton 4, Premium Edition Flashlight, Edition Flashlight, Flashlight

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>