TOPSTAR TSZ9BR30 LED Lamp Instructions

June 15, 2024
TOPSTAR

TOPSTAR TSZ9BR30 LED Lamp

TOPSTAR TSZ9BR30 LED Lamp

Product Features

  • Compact structure and design – small, light weight, stylish
  • Made with high quality parts and materials – high reliability
  • Light-emitting elements and parts produced with new manufacturing technology – high lumen output
  • The LED bulbs can’t be used in any dimmable circuit

Product drawing and dimensions

Model Input Power (W) CCT(K) Lamp Cap
TSZ9BR30-LD01 1-CEC 120VAC 50/60Hz 9W 2700-6500K E26

Selection and installation instruction

  1. Open product packaging and check if product is intact, contact seller if found damaged.
  2. Check to confirm product rated voltage is same as local power grid voltage.
  3. Switch off light power.
  4. Hold bulb by plastic housing and install into light socket.
  5. Switch on/off as usual when power is connected.

Warning

  1. Do not put in dripping-wet environment.
  2. Do not touch bulb when switched on as high surface temperature may scorch and injure skin.
  3. Lumen output drops when bulb is used beyond rated lumen maintenance period. For better protection of your eyesight, do not use beyond rated period and replace bulb accordingly.
  4. Use in Damp Locations only

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B)

This device meets the exemption from the routine evaluation limits in section 2.5o f RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This device complies with the exemption from the current assessment limits in section 2.5 of cnr – 102 and compliance with rf exposure rss 102, users can obtain canadian data on rf field exposure and compliance.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This equipment must be installed and used at a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals