Shenzhen Topstar Industry LB-E10 True Wireless Earbuds User Guide
- June 6, 2024
- Shenzhen Topstar Industry
Table of Contents
Shenzhen Topstar Industry LB-E10 True Wireless Earbuds User Guide
What’s in the Box
-
Charging Case
-
Earbuds(L/R)
-
Earbuds Tips (S/M/L)
-
USB Type C Cable
-
Welcome Guide
Product Overview
- Power Indicator for the Charging Case
- Power Indicator for the Earbuds
- USB C Charging Port
- LED Indicator
- Multi-Function Touch panel
Specification
| Model | LB-E10 |
|---|---|
| Input | 5V 500 mA |
| Rated output power | 5 mW@1%THD |
| Battery Capability | 3.7V / 65mAh (earbuds); |
3.7V / 500mAh (charging case)
Charging Time| 1.5h-2.5h (earbuds); 1.5h (charging case)
Play Time 7 hours
(Varies by volume level and content)| 7 hours (Totally 38 hours with the
charging case)
Bluetooth Version| Bluetooth V5.0
Frequency Response| 20Hz-20kHz
Bluetooth Range| >33ft/10m
Quick Start
Choose the earbuds tips that fit your ears best when using for the first time.
Charging
- Put the earbuds back to the charging case.
- Use the provided USB-C cable to fuel the charging case
LED Behavior (Earbuds)
| Low Battery | Red light flashes every 3 Second |
|---|---|
| Charging | Steady red |
| Fully Charged | Red light off, blue light on and then off |
Power Indicator (Charging case)
| Charging | Display current power percentage. The last digit will blink. |
|---|---|
| Fully Charged | A solid 100 will flash for 5s Charged and then off. |
Power On/Off
Open the charging case and take out the earbuds, and the earbuds will automatically power on.
Place the earbuds back into the charging case, and the earbuds will automatically power off.
| On | Steady blue for 1 second |
|---|---|
| Off | Steady red for 1 second |
LED Behavior (Earbuds )
Note: To manually power on, press and hold the multi-function touch panel on either one of earbuds for 3 seconds.
To manually power off, press and hold the multi-function touch panel on either one of earbuds for 5 seconds.
Pairing
- Take earbuds out of the charging case (to enter pairing mode).
- Turn on the Bluetooth in your device settings.
- Find “LavaBeans El 0” in the Bluetooth-device options.
- Confirm to pair and enjoy your day!
LED Behavior (Earbuds)
| Bluetooth pairing | Blue and red lights blink alternately |
|---|---|
| Bluetooth connected | Steady red and blue for 1 second, and then off |
Note: Each time you take your earbuds out of the charging case, they will automatically reconnect to your last paired device (about 20s).
Touch Controls
| Play/Pause | Press (R/L) | |
|---|---|---|
| Next track |
| Tap twice (R)
Previous track| | Tap twice (L)
---|---|---
Volume up|
| Press and hold (R)
Volume down|
| Press and hold (L)
Activate Siri or other voice assistant|
| Press 3 times (R/L)
Answer/End a call|
| Press (R/L) while called
Reject a call|
| Press for 2s (R/L)
Reset
Reset the earbuds if they cannot connect with each other properly, cannot connect with your device properly, or if you want to pair with another devices. 1. Take the earbuds out of the charging case. 2. Hold the multi- function touch panel for Ss until the LED lights are flashing blue and red alternately. n. Press the touch panel 3 times on both earhuds until the blue and red lights are on at the same time. 4. After the earbuds are power off automatically (if not, do it manually), you can pair them with your device again.
Warranty
Thank you for choosing Law3Dean3. LD-C10 Dluetooth Carbuds. We are always committed to providing you with the superior products and services. LavaBeans promises:
- 30-day Money Back Guarantee
- 18-month Product Warranty
- Lifetime technical support
If for any reason you am not fully satisfied, please contact its with the order number at support@lavabeans.shop and you may get timely assistance, replacement or refund. We are always here to help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>