Edragonmall YC-618W15 Wireless Charger Instructions
- June 15, 2024
- Edragonmall
Table of Contents
Edragonmall YC-618W15 Wireless Charger
Product Information
- Specifications
- Product Name: Wireless Charger
- Model: YC-618W15
- Trademark: Zenoval
- Manufacturer: CLEAR FLOWER LIMITED
- Importer: CLEAR FLOWER LIMITED
- Manufacturer Address: 331 12 Mayfield High Street, Newtownabbey, Northern Ireland, BT36 7WU, GB
- Email: CLEARFLOWERLIMITED@outlook.com.
- Input: DC 9V/3A
- Output: Wireless Phone Output: 15W(Max.)
- Product Size: 140mm90mm70mm
- Weight: 110g Made In China
- Usage Instructions
- Safety Precautions
- Before using the wireless charger, please read and follow these safety precautions:
- Do not use the wireless charger near water or in wet conditions.
- Avoid using the wireless charger if it is damaged or has exposed wiring.
- Keep the wireless charger away from open flames or heat sources.
- Do not disassemble or modify the wireless charger in any way.
- Keep the wireless charger out of reach of children.
- Charging Your Device
- To charge your device using the wireless charger, please follow these steps:
- Connect the wireless charger to a power source using the provided DC 9V/3A input.
- Place your compatible phone on the wireless charging pad, ensuring proper alignment with the charging coils.
- Your phone should start charging automatically. The wireless charger will provide a maximum output of 15W.
- Maintenance and Care
- To ensure optimal performance and longevity of the wireless charger, please follow these maintenance tips:
- Regularly clean the charging pad with a soft, dry cloth to remove dust or debris.
- Avoid exposing the wireless charger to extreme temperatures or direct sunlight.
- Do not place heavy objects on the wireless charger.
- If the wireless charger becomes hot during use, disconnect it from the power source and allow it to cool down before further use.
- FAQ
- Q: Can I use this wireless charger with any phone?
- A: This wireless charger is compatible with phones that support wireless charging. However, please check your phone’s specifications to ensure compatibility.
- Q: How do I know if my phone is charging?
- A: When you place your phone on the wireless charging pad, it should display a charging indicator or notification to indicate that it is charging.
- Q: Can I charge multiple devices simultaneously?
- A: This wireless charger is designed to charge one device at a time. Charging multiple devices simultaneously may result in slower charging speeds or unstable performance.
- Q: Is it safe to leave my phone on the wireless charger overnight?
- A: Yes, it is safe to leave your phone on the wireless charger overnight. The wireless charger is equipped with safety features to prevent overcharging and overheating.
Specification
- Product Name: Wireless Charger
- Model: YC-618W15
- Trademark: Zenoval
- Manufacturer: CLEAR FLOWER LIMITED
- Importer: CLEAR FLOWER LIMITED
- Manufacturer Address: 331 12 Mayfield High Street, Newtownabbey, Northern Ireland, BT36 7WU, GB
- Email: CLEARFLOWERLIMITED@outlook.com
- Input: DC 9V/3A
- Output: Wireless Phone Output: 15W(Max.)
- Product Size: 140mm90mm70mm
- Weight: 110g Made In China
Warning
- Use the correct power supply: Ensure to use the power supply recommended or provided by the charger manufacturer. Using an unsuitable power supply may cause the charger to overheat, cause electric shock, and even cause a fire.
- Do not cover the device during charging: When the device is charging, it should not be covered to prevent excessive heat generation. Excessive heat may cause damage to batteries and equipment.
- Avoid contact with metal objects: Wireless chargers should not be placed near metal objects during charging, as they may interfere with the charging process and may even cause overheating or fire.
- Avoid using damaged chargers: If there is any obvious damage to the wireless charger, such as broken wires, cracks, loose components, etc., it should not be used again. Using a damaged charger may cause electric shock or fire.
Instructions for Use
Connect the adapter and turn on the power. Place the device in the charging area. Cover the device or place the charger near a metal object. If there are signs of damage to the charger, immediately stop using it. WEB
Information on electrical and electronic equipment
The following notice is intended for private end-users using electrical and/or electronic equipment.
- Separate collection of waste equipment Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old equipment must record them separately from unsorted municipal waste. In particular, old equipment does not belong in household waste, but in special collection and return systems.
- Batteries and accumulators Owners of waste equipment shall, as a rule, separate waste batteries and accumulators that are not enclosed by the waste equipment from it before being handed over to a collection point. This does not apply if the waste equipment is handed over to public waste management bodies and separated from other waste equipment there for preparation for reuse.
- Possibilities of returning old equipment If you own old equipment, you can return or collect old equipment for proper disposal of the old equipment to the facilities established and available by public waste management bodies. Where appropriate, it is also possible to hand over electrical and electronic equipment to reuse the equipment. Further information can be obtained from the respective collection or collection centre. Return point.
- Privacy Policy Old equipment often contains sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for the deletion of data on the waste equipment to be disposed of.
- Meaning of the symbol “crossed out trash can” The symbol of a crossed-out bin, which is regularly depicted on the electrical and electronic equipment, indicates that at the end of its life the respective device must be recorded separately from unsorted municipal waste.
CONTACT
-
Name: Sea&Mew Consulting GmbH
-
Address: Mittenhuber Straße 4, 92318 Neumarkt
-
Email: Compliance.EU@outlook.com.
-
Contact Person: Yuan Li
-
Name: Sea&Mew Accounting Ltd
-
Address: Electric Avenue Vision 25, London, Enfield EN3 7GD
-
Contact Person: Billy Han
-
E-mail: info@seamew.net.
This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. This restriction will be applied to all Member States of the European Union. This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product
Declaration of Conformity
- Hereby, CLEAR FLOWER LIMITED declares that the product type YC-618W15 complies with Directives 2014/53/EU.
- The full text of the EU Declaration of Conformity is available at the following internet address: https://crvntnta.supersitegroup.com.
- Radiated H-Field 16.3 dBuA/m (@10m)
- TX/RX Frequency Range 110-148kHz(Only for EU&UK)
FCC
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>