BANDWERK BS-00001 Magbase Max User Manual
- June 15, 2024
- BANDWERK
Table of Contents
BANDWERK BS-00001 Magbase Max
Magbase Max User Manual
Please read through these instructions prior to using the product, and keep
this manual for future reference.
Regulatory Compliance
Federal Communication Commission Interference Statement The Federal
Communication Commission Radio Frequency Interference Statements includes the
following paragraph:
Specifications
| Test item description | Magbase Max |
|---|---|
| Trade Mark | Bandwerk |
| Manufacturer | Mictron ,LTD. |
| Model/Type reference | BS-00001 |
| Listed Models | BS-00002, BS-00003 |
| Modulation Type | ASK |
| Operation Frequency | From 110KHz~205KHz |
| Rating Input | DC 20V 3.25A |
| Output 1 (Left) | 5W/7.5W/10W/15W Max |
| Output 2 (Middle) | 5W/7.5W/10W/15W Max |
| Output 3 (Right) | 5W/7.5W/10W/15W Max |
Product Usage Instructions
Installation
To install the Magbase Max, follow these steps
- Choose a suitable location for the Magbase Max on a flat and stable surface.
- Ensure that the input power matches the rating specified in the specifications section.
- Connect the Magbase Max to a power outlet using the provided power cable.
- Make sure the Magbase Max is within range of the device you want to charge wirelessly.
Wireless Charging
To wirelessly charge a compatible device using the Magbase Max, follow
these steps
- Place your device on the center of the Magbase Max.
- Ensure that the device is properly aligned with the charging coil on the Magbase Max.
- The device should start charging automatically. If not, adjust its position until charging begins.
Safety Precautions
Follow these safety precautions while using the Magbase Max
- Keep the Magbase Max away from water and other liquids.
- Avoid placing metallic objects or magnetic-sensitive items near the Magbase Max.
- Do not disassemble or modify the Magbase Max. Doing so may void the warranty and pose a safety risk.
- Unplug the Magbase Max from the power source when not in use.
FAQ
-
Q: What devices are compatible with the Magbase Max?
A: The Magbase Max is compatible with devices that support wireless charging, such as smartphones and other Qi-enabled devices. -
Q: Can I charge multiple devices simultaneously on the Magbase Max?
A: Yes, you can charge up to three devices simultaneously on the Magbase Max. Each output supports different power levels. -
Q: How do I know if my device is charging?
A: When your device is properly placed on the Magbase Max and charging, a charging indicator light will illuminate on both the Magbase Max and your device.
Magbase Max User Manual
Please read through these instructions prior to using the product, and keep this manual for future reference.
Specification
- Test item description : Magbase Max
- Trade Mark: Bandwerk
- Manufacturer: Mictron ,LTD.
- Model/Type reference: BS-00001
- Listed Models: BS-00002, BS-00003
- Modulation Type: ASK
- Operation Frequency: From 110KHz~205KHz
Rating
- Input : DC 20V 3.25A
- Output 1(Left): 5W/7.5W/10W/15W（Max）
- Output 2(Middle ): 5W/7.5W/10W/15W （Max）
- Output 3(Right): 5W/7.5W/10W/15W （Max）
Regulatory Compliance
Federal Communication Commission Interference Statement
The Federal Communication Commission Radio Frequency Interference
Statements includes the following paragraph
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the use is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. The FCC certification of this device refers to RF
exposure testing performed in typical operating conditions, where a person is
no closer than 20 centimeters from the device surface at all times, except for
non-repetitive patterns with transient time intervals in the order of a
second. Only in the stated conditions, the device is shown to fully comply
with the FCC RF Exposure requirements of KDB 447498.