HILTI MFP-CLD-I Fixed Point Compact Instructions
- June 9, 2024
- HILTI
Table of Contents
HILTI MFP-CLD-I Fixed Point Compact
Product Information
-
Product Name: MFP-CLD-I
-
Model Number: 2235900 A1-01.2022
-
Components:
- 1x MFP-CLD-I
- 2x MFP-PC 73-78 to 213-221
- 4x HST3-M12 x 85 #2113978 / HUS3-H 10 x 60 #2079911 / HUS4-H 10
x 60 #2293552
-
Maximum Force (Fmax): 2x
-
Minimum Height (Hmin): > 0mm
-
Maximum Height (Hmax): > 3mm
-
Torque: 15 Nm Tinst (11 ft-lbs)
-
MFP-PC Quantity: 4
Product Usage Instructions
- Assemble the components as per the instructions provided in the manual.
- Place the MFP-CLD-I on a flat surface.
- Adjust the height of the MFP-CLD-I within the range of Hmin (>0mm) and Hmax (>3mm) using the provided components (HST3-M12 x 85 #2113978 / HUS3-H 10 x 60 #2079911 / HUS4-H 10 x 60 #2293552).
- Once the desired height is achieved, use the torque wrench to tighten the components to a torque of 15 Nm Tinst (11 ft-lbs).
- Insert the MFP-PC into the MFP-CLD-I.
- Repeat steps 2-5 for all 4 MFP-PCs.
- The product is now ready to use.
MOUNTING INSTRUCTION
TOOLS REQUIRED
INSTALLATION INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>