ADLER EUROPE AD 2027 Dryer and Curler User Manual
- June 15, 2024
- ADLER EUROPE
Table of Contents
AD 2027
User Manual
user
manual
AD 2027 Dryer and Curler
SAFETY
CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE
The warranty conditions are different, if the device is used for commercial
purpose.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240 V~ 50/60 Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.
-
WARNING: Never use this device close to water, e.g.: under shower, in bathtub, or above sink filled with water.
-
WARNING: Never leave the product connected to the power source without supervision.
Even when use is interrupted for a short time, turn it off from the network, unplug the power. -
WARNING: The temperature of accessible surfaces of an operating device may be high when the equipment is in operation.
-
WARNING: Keep the appliance and its cord out of the reach of children.
-
WARNING: After you are finished using the device always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
WARNING: Never use the product close to combustibles.
-
WARNING: If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
-
WARNING: Do not touch the device with wet hands.
-
WARNING: The device has to be turned off after every use.
-
WARNING: The equipment must be used in such way that in the extreme position of the power cord it is beyond the reach of a person using a bathtub or shower.
-
Do not wrap electric cable around the device.
-
Do not use device in the bath.
-
Do not remove dust or foreign bodies from the inside of the device using sharp or metal objects.
-
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
-
Periodically check the power cord condition. If the power cord is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cord or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
The power cord should not touch hot parts of the device and should not be located near other heat sources.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
Do not allow the motor part of the device to get wet.
-
Do not touch the hot surfaces of the device.
-
After turning off the appliance, before cleaning or storing it, disconnect the power plug from the socket and allow the equipment to cool down. Please wait long enough because the heated device cools down slowly.
-
Do not use aggressive detergents in the form of emulsions, milks, pastes, etc. to clean the housing, as they may, among other things, remove informative graphic symbols such as scales, markings, warning signs, etc.
-
The device is not designed to work with external schedulers or separate remote control system
-
Do not cover the device, it might cause the accumulation of heat in its interior and it may cause damage or fire.
-
Hairsprays contain flammable materials. Do not apply them while using the device.
-
Do not use the device on people who are sleeping.
-
During operation, do not place the device on wet surfaces or clothes.
-
During operation of the device, metal elements heat up to high temperatures. Do not touch hot parts of the device with your bare hands and do not allow contact with the scalp, as this may result in burns.
PRODUCT DESCRIPTION
(pic. 1)
- cool tip
- removable brushes
- switch On/Off/temperature adjustment
- brush lock button
- removable filter cover
- swivel cord
USING THE DEVICE
- Attach brush (2) – type as required
- Plug power plug into the power socket.
- Turn on hair styler with switch (3). Adjust required air temperature (C – cool shot, 1 – lower temperature and speed, 2 – higher temperature)
- Separate streak of hair, brush out, and start to wind from the end on the brush. Wait a few seconds till hot air stream consolidate shape of winded hair.
- Unwind your hair.
- Turn off hair styler using the switch (3) and form required hairstyle with brush or comb.
- Unplug device from the power socket.
CLEANING AND MAINTENANCE
- Unplug hair styler from the power socket before cleaning.
- Wipe outer housing with damp cloth. Do not use abrasive or sharp materials.
- Clean brush from hair each time after use.
- Check if the air inlet cover is not stuck with hair or other dirt. If necessary twist off the filter cover and clean.
- Do not leave any hair on the hair styler.
TECHNICAL DATA
Power: 1200W
Voltage: 220-240V~ 50/60Hz
**** To protect your environment: please separate carton boxes and plastic
bags and dispose them in corresponding waste bins. Used appliance should be
delivered to the dedicated collecting points due to hazarsous components,
which may effect the environment. Do not dispose this appliance in the common
waste bin.
AFTER SALE SERVICE NOTICE
If you want to buy spare parts or make any complaints, please contact the seller who issued the receipt directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>