ZHU30RSPSS Monogram 30 Induction Cooktop User Guide
- June 15, 2024
- MONOGRAM
Table of Contents
ZHU30RSPSS Monogram 30 Induction Cooktop
Product Information
Specifications
- Overall Width: 29 3/4 inches (75.6 cm)
- Overall Depth: 28 1/2 inches (72.4 cm)
- Overall Height: 5/8 inch (1.6 cm) Cutout overlap
- Cutout Width: 28 1/4 inches (71.8 cm)
- Cutout Depth: 19 5/8 inches (49.9 cm)
- Electrical Rating: 7400W at 240V/60Hz, 6400W at 208V/60Hz
- Breaker Size: This cooktop requires a two-wire, three conductors 208/240 VAC, 60 Hertz and receptacle-type installation
- Net Weight: 45 lbs. (20.4 kg)
Optional Accessories
- Precision Cooking Kit – JXPROBE1
- Flush-Mount Kit – JXFLUSH1
- Griddle – JXGRIDL1
Installation
To install the Monogram 30 Induction Cooktop, follow these steps:
Step A: Locate the electrical junction box
Locate the electrical junction box at least 16 inches below the countertop.
Step B: Cabinet base
Ensure that the cabinet base is properly prepared for installation.
Step C: Cutout dimensions
Make sure the cutout in the countertop meets the following dimensions:
- Cutout Width: 28 1/4 inches (71.8 cm)
- Cutout Depth: 19 5/8 inches (49.9 cm)
Step D: Clearance
Provide the necessary clearance between the rear edge of the cutout and the
nearest wall behind the cooktop.
Step E: ADA Installation
If installing the cooktop for ADA compliance, ensure the following dimensions:
- Cutout Width: Between 28 1/2 inches (72.4 cm) and 28 5/8 inches (72.7 cm)
- Cutout Depth: Between 19 5/8 inches (49.9 cm) and 19 3/4 inches (50.2 cm)
Step F: Drawer
Ensure that there is enough clearance for a drawer below the cooktop.
Step G: Side View
Ensure there is a minimum of 3 inches (7.6 cm) of clearance on the sides of
the cooktop.
Step H: Front View
Ensure there is a minimum of 5 inches (12.7 cm) of clearance between the front
edge of the cutout and the front edge of the countertop.
Product Usage Instructions
-
Gourmet Guided Cooking
Elevate your culinary skills by using the Hestan CueTM pan included with your new cooktop and the smart cooking system. Follow the instructions provided by the smart cooking system to create an array of chef-inspired recipes. -
Glide Touch Controls
Use the easy-to-use electronic controls to precisely raise or lower the heat with a simple swipe. -
Four Induction Cooking Elements
Enjoy rapid and precise heating with the four induction cooking elements. The cool-to-the-touch surface makes it easy to clean. -
11 3700W Induction Element
Rapidly boil water with the most powerful induction element, which has a power rating of 3700W. -
Syncburners
Control two 7-inch elements simultaneously to evenly heat large cookware or the included griddle. -
Melt Setting
Gently melt delicate foods without burning or scorching them using the melt setting. -
Control Lock Capability
Protects against unintended activation by enabling the control lock capability. -
Custom Settings
Personalize your cooktop settings to fit your cooking style. -
Pan Presence & Size Sensors
Cook efficiently with elements that heat to the size of your pan and automatically shut off when no pan is present. -
Flush-Mount Capable
With the optional accessory kit, you can achieve a sleek, modern look by flush-mounting the cooktop into the countertop. -
Precision Cooking
Achieve restaurant-quality results with the optional probe that wirelessly controls the temperature of your food. This feature is ideal for Sous Vide, Slow Cooking, making candy, or any other cooking that requires precise control of temperature over time.
FAQ
Q: How do I contact customer support?
A: For questions about your appliance, please call
1-800-626-2000.
FEATURED
-
GOURMET GUIDED COOKING
Elevate your culinary skills. Use the Hestan Cue™ pan included with your new cooktop and this smart cooking system to create an array of chef-inspired recipes—perfectly. -
GLIDE TOUCH CONTROLS
Easy-to-use electronic controls allow you to precisely raise or lower heat in an instant with one easy swipe. -
FOUR INDUCTION COOKING ELEMENTS
Enjoy a new level of rapid, precise heating with a cool-to-the-touch surface that’s easy to clean. -
11″ 3700W INDUCTION ELEMENT
Rapidly boil water with our most powerful induction element. -
SYNCBURNERS
Control two 7″ elements simultaneously to evenly heat large cookware or the included griddle. -
MELT SETTING
Gently melt delicate foods without burning or scorching. -
CONTROL LOCK CAPABILITY
Protects against unintended activation. -
CUSTOM SETTINGS
Personalize your cooktop settings to fit your cooking style. -
PAN PRESENCE & SIZE SENSORS
Cook efficiently with elements that heat to the size of your pan and shut off when no pan is present. -
FLUSH-MOUNT CAPABLE
Optional accessory kit enables the cooktop to be flush inset into the countertop for a sleek, modern look. -
PRECISION COOKING
Achieve restaurant quality results with an optional probe that wirelessly controls the temperature of your food. Ideal for Sous Vide, Slow Cooking, making candy, etc., or for any other cooking that requires precise control of temperature over time.
SPECIFICATIONS
OPTIONAL ACCESSORIES
ATTENTION ELECTRICIAN:
This cooktop is provided with a 48″ flexible conduit and must be hard wired
(direct wired) into an approved junction box and be properly grounded. It is
not permitted to use a “plug and receptacle type installation on this cooktop.
Use a two-wire, three conductor 208/240 VAC, 60 Hertz electrical system. A
white (neutral) wire is not needed for this cooktop For more details refer to
the installation instructions for this product.
OVERALL DIMENSIONS
Dimensions in parentheses are in centimeters unless otherwise noted. Actual
product dimensions may vary due to manufacturing tolerances.
INSTALLATION
COUNTERTOP CUT-OUT DIMENSIONS
ADA INSTALLATION
HELPFUL TIPS
-
A. Wall coverings, countertop and cabinets surrounding cooktop must be able to withstand temperatures of up to 200ºF.
-
B. Minimum 30″ clearance from countertop to unprotected overhead surfaces , when no ventilation hood or microwave oven is installed.
-
C. When using a ventilation hood or microwave oven above the cooktop, see hood or microwave installation instructions for minimum overhead clearance dimensions.
-
D. Minimum 15″ of clearance from countertop to nearest overhead surface on both sides of cooktop. Make sure to include any lighting rail covers in calculation.
-
E. Minimum 2″ distance from edge of cutout to nearest adjacent side wall below upper cabinets.
-
F. Install an approved junction box where it can be easily reached through the front of the cabinet where the cooktop is located.
IMPORTANT: For serviceability, the junction box must be located where it will allow considerable slack in the 48″ long conduit. -
G. Maximum 13″ depth of unprotected overhead surfaces, when no ventilation hood or microwave oven is installed.
-
H. For Americans with Disabilities Act (ADA) forward approach installation: Minimum 5″ clearance between the top enclosure must be made of at least 1/4″ thick wood material, and must have an access panel installed in order to provide access to the junction box and hold-down brackets, and to allow for service of the cooktop.
For more details refer to the installation instructions for this product.
INSTALLATION ABOVE WALL OVEN
INSTALLATION ABOVE WARMING DRAWER
For more details, refer to the installation instructions for this product
on Monogram.com. Dimensions in parentheses are in centimeters unless otherwise
noted.
HELPFUL TIPS
- A. Note this cooktop is only approved for installation above specific wall ovens as labeled on this unit.
- B. Warming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer or underside of the cooktop for approved combinations.
- C. When installing this cooktop above a single-wall oven, do not install the baffle.
- D. Maintain a minimum distance of 31-1/4″ from the top surface of the countertop to the wall oven platform to ensure that the cooktop and wall oven do not interfere with each other (see picture).
- E. minimum height of 4 3/4″ from the floor to ensure that the handle does not hit the floor when the door is opened.
- F. Junction box location for wall oven (may also be located in adjacent cabinet).
- G. Electrical connection for cooktop must be located in an accessible adjacent location to the right (may also be located in adjacent cabinet).
- H. When installing the cooktop above a warming drawer, a solid barrier must be installed at least 5″ from the top of the countertop. Use any solid material such as 1/4″ thick plywood. Allow at least a 2″ air gap between the front of the barrier and the inside of the cabinet and at least 1/4″ air gap between the barrier and the top of the warming drawer.
NOTE: ZTSX1DS wall oven is not approved for installation under cooktop.
FLUSH MOUNT INSTALLATION
HELPFUL TIPS
- A. Use optional JXFLUSH1 kit to flush-mount the cooktop into the countertop. Read all installation instructions supplied with the cooktop and kit before beginning installation.
- B. To avoid hot cookware from contacting the countertop surface, the cooktop should be installed at least 1/32″ higher than the countertop.
- C. Use strips of wood or solid-surface countertop material to reinforce the countertop below the flush-mount rabbet. For an island or peninsular installation secure strips to all four sides, otherwise just secure strips to the front and back under the cutout.
- D. Note this cooktop is only approved for installation above specific wall ovens as labelled on this unit.
- E. When installing this cooktop above a single wall oven, do not install the baffle.
- F. When this cooktop is installed above a flush-mounted wall oven, the clearance from the front edge of the countertop to the front edge of the cooktop cutout is a minimum 2-1/2″ plus the wall oven cleat setback.
- G. minimum height of 4 3/4″ from the floor to ensure that the handle does not hit the floor when the door is opened.
- H. Warming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer or underside of the cooktop for approved combinations.
- I. When installing the cooktop above a warming drawer, a solid barrier must be installed at least 5-1/2″ from the top of the countertop. Use any solid material such as 1/4″ thick plywood. Allow at least 1/4″ air gap between the barrier and the top of the warming drawer.
For questions about your appliance, please call 1-800-626-2000.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>